+++ /dev/null
-/*
-<:copyright-gpl
-
- Copyright 2003 Broadcom Corp. All Rights Reserved.
-
- This program is free software; you can distribute it and/or modify it
- under the terms of the GNU General Public License (Version 2) as
- published by the Free Software Foundation.
-
- This program is distributed in the hope it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
- for more details.
-
- You should have received a copy of the GNU General Public License along
- with this program; if not, write to the Free Software Foundation, Inc.,
- 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
-
-:>
-*/
-/**************************************************************************
- * File Name : boardparms.h
- *
- * Description: This file contains definitions and function prototypes for
- * the BCM63xx board parameter access functions.
- *
- * Updates : 07/14/2003 Created.
- ***************************************************************************/
-
-#if !defined(_BOARDPARMS_H)
-#define _BOARDPARMS_H
-
-/* Return codes. */
-#define BP_SUCCESS 0
-#define BP_BOARD_ID_NOT_FOUND 1
-#define BP_VALUE_NOT_DEFINED 2
-#define BP_BOARD_ID_NOT_SET 3
-
-/* Values for BpGetSdramSize. */
-#define BP_MEMORY_8MB_1_CHIP 0
-#define BP_MEMORY_16MB_1_CHIP 1
-#define BP_MEMORY_32MB_1_CHIP 2
-#define BP_MEMORY_64MB_2_CHIP 3
-#define BP_MEMORY_32MB_2_CHIP 4
-#define BP_MEMORY_16MB_2_CHIP 5
-
-/* Values for EthernetMacInfo PhyType. */
-#define BP_ENET_NO_PHY 0
-#define BP_ENET_INTERNAL_PHY 1
-#define BP_ENET_EXTERNAL_PHY 2
-#define BP_ENET_EXTERNAL_SWITCH 3
-
-/* Values for EthernetMacInfo Configuration type. */
-#define BP_ENET_CONFIG_MDIO 0 /* Internal PHY, External PHY, Switch+(no GPIO, no SPI, no MDIO Pseudo phy */
-#define BP_ENET_CONFIG_GPIO 1 /* Bcm96345GW board + Bcm5325M/E */
-#define BP_ENET_CONFIG_MDIO_PSEUDO_PHY 2 /* Bcm96348GW board + Bcm5325E */
-#define BP_ENET_CONFIG_SPI_SSB_0 3 /* Bcm96348GW board + Bcm5325M/E */
-#define BP_ENET_CONFIG_SPI_SSB_1 4 /* Bcm96348GW board + Bcm5325M/E */
-#define BP_ENET_CONFIG_SPI_SSB_2 5 /* Bcm96348GW board + Bcm5325M/E */
-#define BP_ENET_CONFIG_SPI_SSB_3 6 /* Bcm96348GW board + Bcm5325M/E */
-
-/* Values for EthernetMacInfo Reverse MII. */
-#define BP_ENET_NO_REVERSE_MII 0
-#define BP_ENET_REVERSE_MII 1
-
-/* Values for VoIPDSPInfo DSPType. */
-#define BP_VOIP_NO_DSP 0
-#define BP_VOIP_DSP 1
-
-
-/* Values for GPIO pin assignments (AH = Active High, AL = Active Low). */
-#define BP_ACTIVE_MASK 0x8000
-#define BP_ACTIVE_HIGH 0x0000
-#define BP_ACTIVE_LOW 0x8000
-#define BP_GPIO_0_AH (0 | BP_ACTIVE_HIGH)
-#define BP_GPIO_0_AL (0 | BP_ACTIVE_LOW)
-#define BP_GPIO_1_AH (1 | BP_ACTIVE_HIGH)
-#define BP_GPIO_1_AL (1 | BP_ACTIVE_LOW)
-#define BP_GPIO_2_AH (2 | BP_ACTIVE_HIGH)
-#define BP_GPIO_2_AL (2 | BP_ACTIVE_LOW)
-#define BP_GPIO_3_AH (3 | BP_ACTIVE_HIGH)
-#define BP_GPIO_3_AL (3 | BP_ACTIVE_LOW)
-#define BP_GPIO_4_AH (4 | BP_ACTIVE_HIGH)
-#define BP_GPIO_4_AL (4 | BP_ACTIVE_LOW)
-#define BP_GPIO_5_AH (5 | BP_ACTIVE_HIGH)
-#define BP_GPIO_5_AL (5 | BP_ACTIVE_LOW)
-#define BP_GPIO_6_AH (6 | BP_ACTIVE_HIGH)
-#define BP_GPIO_6_AL (6 | BP_ACTIVE_LOW)
-#define BP_GPIO_7_AH (7 | BP_ACTIVE_HIGH)
-#define BP_GPIO_7_AL (7 | BP_ACTIVE_LOW)
-#define BP_GPIO_8_AH (8 | BP_ACTIVE_HIGH)
-#define BP_GPIO_8_AL (8 | BP_ACTIVE_LOW)
-#define BP_GPIO_9_AH (9 | BP_ACTIVE_HIGH)
-#define BP_GPIO_9_AL (9 | BP_ACTIVE_LOW)
-#define BP_GPIO_10_AH (10 | BP_ACTIVE_HIGH)
-#define BP_GPIO_10_AL (10 | BP_ACTIVE_LOW)
-#define BP_GPIO_11_AH (11 | BP_ACTIVE_HIGH)
-#define BP_GPIO_11_AL (11 | BP_ACTIVE_LOW)
-#define BP_GPIO_12_AH (12 | BP_ACTIVE_HIGH)
-#define BP_GPIO_12_AL (12 | BP_ACTIVE_LOW)
-#define BP_GPIO_13_AH (13 | BP_ACTIVE_HIGH)
-#define BP_GPIO_13_AL (13 | BP_ACTIVE_LOW)
-#define BP_GPIO_14_AH (14 | BP_ACTIVE_HIGH)
-#define BP_GPIO_14_AL (14 | BP_ACTIVE_LOW)
-#define BP_GPIO_15_AH (15 | BP_ACTIVE_HIGH)
-#define BP_GPIO_15_AL (15 | BP_ACTIVE_LOW)
-#define BP_GPIO_16_AH (16 | BP_ACTIVE_HIGH)
-#define BP_GPIO_16_AL (16 | BP_ACTIVE_LOW)
-#define BP_GPIO_17_AH (17 | BP_ACTIVE_HIGH)
-#define BP_GPIO_17_AL (17 | BP_ACTIVE_LOW)
-#define BP_GPIO_18_AH (18 | BP_ACTIVE_HIGH)
-#define BP_GPIO_18_AL (18 | BP_ACTIVE_LOW)
-#define BP_GPIO_19_AH (19 | BP_ACTIVE_HIGH)
-#define BP_GPIO_19_AL (19 | BP_ACTIVE_LOW)
-#define BP_GPIO_20_AH (20 | BP_ACTIVE_HIGH)
-#define BP_GPIO_20_AL (20 | BP_ACTIVE_LOW)
-#define BP_GPIO_21_AH (21 | BP_ACTIVE_HIGH)
-#define BP_GPIO_21_AL (21 | BP_ACTIVE_LOW)
-#define BP_GPIO_22_AH (22 | BP_ACTIVE_HIGH)
-#define BP_GPIO_22_AL (22 | BP_ACTIVE_LOW)
-#define BP_GPIO_23_AH (23 | BP_ACTIVE_HIGH)
-#define BP_GPIO_23_AL (23 | BP_ACTIVE_LOW)
-#define BP_GPIO_24_AH (24 | BP_ACTIVE_HIGH)
-#define BP_GPIO_24_AL (24 | BP_ACTIVE_LOW)
-#define BP_GPIO_25_AH (25 | BP_ACTIVE_HIGH)
-#define BP_GPIO_25_AL (25 | BP_ACTIVE_LOW)
-#define BP_GPIO_26_AH (26 | BP_ACTIVE_HIGH)
-#define BP_GPIO_26_AL (26 | BP_ACTIVE_LOW)
-#define BP_GPIO_27_AH (27 | BP_ACTIVE_HIGH)
-#define BP_GPIO_27_AL (27 | BP_ACTIVE_LOW)
-#define BP_GPIO_28_AH (28 | BP_ACTIVE_HIGH)
-#define BP_GPIO_28_AL (28 | BP_ACTIVE_LOW)
-#define BP_GPIO_29_AH (29 | BP_ACTIVE_HIGH)
-#define BP_GPIO_29_AL (29 | BP_ACTIVE_LOW)
-#define BP_GPIO_30_AH (30 | BP_ACTIVE_HIGH)
-#define BP_GPIO_30_AL (30 | BP_ACTIVE_LOW)
-#define BP_GPIO_31_AH (31 | BP_ACTIVE_HIGH)
-#define BP_GPIO_31_AL (31 | BP_ACTIVE_LOW)
-#define BP_GPIO_32_AH (32 | BP_ACTIVE_HIGH)
-#define BP_GPIO_32_AL (32 | BP_ACTIVE_LOW)
-#define BP_GPIO_33_AH (33 | BP_ACTIVE_HIGH)
-#define BP_GPIO_33_AL (33 | BP_ACTIVE_LOW)
-#define BP_GPIO_34_AH (34 | BP_ACTIVE_HIGH)
-#define BP_GPIO_34_AL (34 | BP_ACTIVE_LOW)
-#define BP_GPIO_35_AH (35 | BP_ACTIVE_HIGH)
-#define BP_GPIO_35_AL (35 | BP_ACTIVE_LOW)
-#define BP_GPIO_36_AH (36 | BP_ACTIVE_HIGH)
-#define BP_GPIO_36_AL (36 | BP_ACTIVE_LOW)
-
-/* Values for external interrupt assignments. */
-#define BP_EXT_INTR_0 0
-#define BP_EXT_INTR_1 1
-#define BP_EXT_INTR_2 2
-#define BP_EXT_INTR_3 3
-
-/* Values for chip select assignments. */
-#define BP_CS_0 0
-#define BP_CS_1 1
-#define BP_CS_2 2
-#define BP_CS_3 3
-
-/* Value for GPIO and external interrupt fields that are not used. */
-#define BP_NOT_DEFINED 0xffff
-#define BP_HW_DEFINED 0xfff0
-#define BP_UNEQUIPPED 0xfff1
-
-/* Maximum size of the board id string. */
-#define BP_BOARD_ID_LEN 16
-
-/* Maximum number of Ethernet MACs. */
-#define BP_MAX_ENET_MACS 2
-
-/* Maximum number of VoIP DSPs. */
-#define BP_MAX_VOIP_DSP 2
-
-/* Wireless Antenna Settings. */
-#define BP_WLAN_ANT_MAIN 0
-#define BP_WLAN_ANT_AUX 1
-#define BP_WLAN_ANT_BOTH 3
-
-#if !defined(__ASSEMBLER__)
-
-/* Information about an Ethernet MAC. If ucPhyType is BP_ENET_NO_PHY,
- * then the other fields are not valid.
- */
-typedef struct EthernetMacInfo
-{
- unsigned char ucPhyType; /* BP_ENET_xxx */
- unsigned char ucPhyAddress; /* 0 to 31 */
- unsigned short usGpioPhySpiSck; /* GPIO pin or not defined */
- unsigned short usGpioPhySpiSs; /* GPIO pin or not defined */
- unsigned short usGpioPhySpiMosi; /* GPIO pin or not defined */
- unsigned short usGpioPhySpiMiso; /* GPIO pin or not defined */
- unsigned short usGpioPhyReset; /* GPIO pin or not defined (96348LV) */
- unsigned short numSwitchPorts; /* Number of PHY ports */
- unsigned short usConfigType; /* Configuration type */
- unsigned short usReverseMii; /* Reverse MII */
-} ETHERNET_MAC_INFO, *PETHERNET_MAC_INFO;
-
-
-/* Information about VoIP DSPs. If ucDspType is BP_VOIP_NO_DSP,
- * then the other fields are not valid.
- */
-typedef struct VoIPDspInfo
-{
- unsigned char ucDspType;
- unsigned char ucDspAddress;
- unsigned short usExtIntrVoip;
- unsigned short usGpioVoipReset;
- unsigned short usGpioVoipIntr;
- unsigned short usGpioLedVoip;
- unsigned short usCsVoip;
-
-} VOIP_DSP_INFO;
-
-
-/**************************************************************************
- * Name : BpSetBoardId
- *
- * Description: This function find the BOARD_PARAMETERS structure for the
- * specified board id string and assigns it to a global, static
- * variable.
- *
- * Parameters : [IN] pszBoardId - Board id string that is saved into NVRAM.
- *
- * Returns : BP_SUCCESS - Success, value is returned.
- * BP_BOARD_ID_NOT_FOUND - Error, board id input string does not
- * have a board parameters configuration record.
- ***************************************************************************/
-int BpSetBoardId( char *pszBoardId );
-
-/**************************************************************************
- * Name : BpGetBoardIds
- *
- * Description: This function returns all of the supported board id strings.
- *
- * Parameters : [OUT] pszBoardIds - Address of a buffer that the board id
- * strings are returned in. Each id starts at BP_BOARD_ID_LEN
- * boundary.
- * [IN] nBoardIdsSize - Number of BP_BOARD_ID_LEN elements that
- * were allocated in pszBoardIds.
- *
- * Returns : Number of board id strings returned.
- ***************************************************************************/
-int BpGetBoardIds( char *pszBoardIds, int nBoardIdsSize );
-
-/**************************************************************************
- * Name : BpGetEthernetMacInfo
- *
- * Description: This function returns all of the supported board id strings.
- *
- * Parameters : [OUT] pEnetInfos - Address of an array of ETHERNET_MAC_INFO
- * buffers.
- * [IN] nNumEnetInfos - Number of ETHERNET_MAC_INFO elements that
- * are pointed to by pEnetInfos.
- *
- * Returns : BP_SUCCESS - Success, value is returned.
- * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- ***************************************************************************/
-int BpGetEthernetMacInfo( PETHERNET_MAC_INFO pEnetInfos, int nNumEnetInfos );
-
-/**************************************************************************
- * Name : BpGetSdramSize
- *
- * Description: This function returns a constant that describees the board's
- * SDRAM type and size.
- *
- * Parameters : [OUT] pulSdramSize - Address of short word that the SDRAM size
- * is returned in.
- *
- * Returns : BP_SUCCESS - Success, value is returned.
- * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- ***************************************************************************/
-int BpGetSdramSize( unsigned long *pulSdramSize );
-
-/**************************************************************************
- * Name : BpGetPsiSize
- *
- * Description: This function returns the persistent storage size in K bytes.
- *
- * Parameters : [OUT] pulPsiSize - Address of short word that the persistent
- * storage size is returned in.
- *
- * Returns : BP_SUCCESS - Success, value is returned.
- * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- ***************************************************************************/
-int BpGetPsiSize( unsigned long *pulPsiSize );
-
-/**************************************************************************
- * Name : BpGetRj11InnerOuterPairGpios
- *
- * Description: This function returns the GPIO pin assignments for changing
- * between the RJ11 inner pair and RJ11 outer pair.
- *
- * Parameters : [OUT] pusInner - Address of short word that the RJ11 inner pair
- * GPIO pin is returned in.
- * [OUT] pusOuter - Address of short word that the RJ11 outer pair
- * GPIO pin is returned in.
- *
- * Returns : BP_SUCCESS - Success, values are returned.
- * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- * BP_VALUE_NOT_DEFINED - At least one return value is not defined
- * for the board.
- ***************************************************************************/
-int BpGetRj11InnerOuterPairGpios( unsigned short *pusInner,
- unsigned short *pusOuter );
-
-/**************************************************************************
- * Name : BpGetPressAndHoldResetGpio
- *
- * Description: This function returns the GPIO pin assignment for the press
- * and hold reset button.
- *
- * Parameters : [OUT] pusValue - Address of short word that the press and hold
- * reset button GPIO pin is returned in.
- *
- * Returns : BP_SUCCESS - Success, value is returned.
- * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- * BP_VALUE_NOT_DEFINED - At least one return value is not defined
- * for the board.
- ***************************************************************************/
-int BpGetPressAndHoldResetGpio( unsigned short *pusValue );
-
-/**************************************************************************
- * Name : BpGetVoipResetGpio
- *
- * Description: This function returns the GPIO pin assignment for the VOIP
- * Reset operation.
- *
- * Parameters : [OUT] pusValue - Address of short word that the VOIP reset
- * GPIO pin is returned in.
- * [IN] dspNum - Address of the DSP to query.
- *
- * Returns : BP_SUCCESS - Success, value is returned.
- * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- * BP_VALUE_NOT_DEFINED - At least one return value is not defined
- * for the board.
- ***************************************************************************/
-int BpGetVoipResetGpio( unsigned char dspNum, unsigned short *pusValue );
-
-/**************************************************************************
- * Name : BpGetVoipIntrGpio
- *
- * Description: This function returns the GPIO pin assignment for VoIP interrupt.
- *
- * Parameters : [OUT] pusValue - Address of short word that the VOIP interrupt
- * GPIO pin is returned in.
- * [IN] dspNum - Address of the DSP to query.
- *
- * Returns : BP_SUCCESS - Success, value is returned.
- * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- * BP_VALUE_NOT_DEFINED - At least one return value is not defined
- * for the board.
- ***************************************************************************/
-int BpGetVoipIntrGpio( unsigned char dspNum, unsigned short *pusValue );
-
-/**************************************************************************
- * Name : BpGetPcmciaResetGpio
- *
- * Description: This function returns the GPIO pin assignment for the PCMCIA
- * Reset operation.
- *
- * Parameters : [OUT] pusValue - Address of short word that the PCMCIA reset
- * GPIO pin is returned in.
- *
- * Returns : BP_SUCCESS - Success, value is returned.
- * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- * BP_VALUE_NOT_DEFINED - At least one return value is not defined
- * for the board.
- ***************************************************************************/
-int BpGetPcmciaResetGpio( unsigned short *pusValue );
-
-/**************************************************************************
- * Name : BpGetUartRtsCtsGpios
- *
- * Description: This function returns the GPIO pin assignments for RTS and CTS
- * UART signals.
- *
- * Parameters : [OUT] pusRts - Address of short word that the UART RTS GPIO
- * pin is returned in.
- * [OUT] pusCts - Address of short word that the UART CTS GPIO
- * pin is returned in.
- *
- * Returns : BP_SUCCESS - Success, values are returned.
- * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- * BP_VALUE_NOT_DEFINED - At least one return value is not defined
- * for the board.
- ***************************************************************************/
-int BpGetRtsCtsUartGpios( unsigned short *pusRts, unsigned short *pusCts );
-
-/**************************************************************************
- * Name : BpGetAdslLedGpio
- *
- * Description: This function returns the GPIO pin assignment for the ADSL
- * LED.
- *
- * Parameters : [OUT] pusValue - Address of short word that the ADSL LED
- * GPIO pin is returned in.
- *
- * Returns : BP_SUCCESS - Success, value is returned.
- * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- * BP_VALUE_NOT_DEFINED - At least one return value is not defined
- * for the board.
- ***************************************************************************/
-int BpGetAdslLedGpio( unsigned short *pusValue );
-
-/**************************************************************************
- * Name : BpGetAdslFailLedGpio
- *
- * Description: This function returns the GPIO pin assignment for the ADSL
- * LED that is used when there is a DSL connection failure.
- *
- * Parameters : [OUT] pusValue - Address of short word that the ADSL LED
- * GPIO pin is returned in.
- *
- * Returns : BP_SUCCESS - Success, value is returned.
- * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- * BP_VALUE_NOT_DEFINED - At least one return value is not defined
- * for the board.
- ***************************************************************************/
-int BpGetAdslFailLedGpio( unsigned short *pusValue );
-
-/**************************************************************************
- * Name : BpGetWirelessLedGpio
- *
- * Description: This function returns the GPIO pin assignment for the Wireless
- * LED.
- *
- * Parameters : [OUT] pusValue - Address of short word that the Wireless LED
- * GPIO pin is returned in.
- *
- * Returns : BP_SUCCESS - Success, value is returned.
- * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- * BP_VALUE_NOT_DEFINED - At least one return value is not defined
- * for the board.
- ***************************************************************************/
-int BpGetWirelessLedGpio( unsigned short *pusValue );
-
-/**************************************************************************
- * Name : BpGetWirelessAntInUse
- *
- * Description: This function returns the antennas in use for wireless
- *
- * Parameters : [OUT] pusValue - Address of short word that the Wireless Antenna
- * is in use.
- *
- * Returns : BP_SUCCESS - Success, value is returned.
- * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- * BP_VALUE_NOT_DEFINED - At least one return value is not defined
- * for the board.
- ***************************************************************************/
-int BpGetWirelessAntInUse( unsigned short *pusValue );
-
-/**************************************************************************
- * Name : BpGetWirelessSesBtnGpio
- *
- * Description: This function returns the GPIO pin assignment for the Wireless
- * Ses Button.
- *
- * Parameters : [OUT] pusValue - Address of short word that the Wireless Ses
- * Button GPIO pin is returned in.
- *
- * Returns : BP_SUCCESS - Success, value is returned.
- * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- * BP_VALUE_NOT_DEFINED - At least one return value is not defined
- * for the board.
- ***************************************************************************/
-int BpGetWirelessSesBtnGpio( unsigned short *pusValue );
-
-/**************************************************************************
- * Name : BpGetWirelessSesExtIntr
- *
- * Description: This function returns the external interrupt number for the
- * Wireless Ses Button.
- *
- * Parameters : [OUT] pusValue - Address of short word that the Wireless Ses
- * external interrup is returned in.
- *
- * Returns : BP_SUCCESS - Success, value is returned.
- * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- * BP_VALUE_NOT_DEFINED - At least one return value is not defined
- * for the board.
- ***************************************************************************/
-int BpGetWirelessSesExtIntr( unsigned short *pusValue );
-
-/**************************************************************************
- * Name : BpGetWirelessSesLedGpio
- *
- * Description: This function returns the GPIO pin assignment for the Wireless
- * Ses Led.
- *
- * Parameters : [OUT] pusValue - Address of short word that the Wireless Ses
- * Led GPIO pin is returned in.
- *
- * Returns : BP_SUCCESS - Success, value is returned.
- * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- * BP_VALUE_NOT_DEFINED - At least one return value is not defined
- * for the board.
- ***************************************************************************/
-int BpGetWirelessSesLedGpio( unsigned short *pusValue );
-
-/**************************************************************************
- * Name : BpGetUsbLedGpio
- *
- * Description: This function returns the GPIO pin assignment for the USB
- * LED.
- *
- * Parameters : [OUT] pusValue - Address of short word that the USB LED
- * GPIO pin is returned in.
- *
- * Returns : BP_SUCCESS - Success, value is returned.
- * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- * BP_VALUE_NOT_DEFINED - At least one return value is not defined
- * for the board.
- ***************************************************************************/
-int BpGetUsbLedGpio( unsigned short *pusValue );
-
-/**************************************************************************
- * Name : BpGetHpnaLedGpio
- *
- * Description: This function returns the GPIO pin assignment for the HPNA
- * LED.
- *
- * Parameters : [OUT] pusValue - Address of short word that the HPNA LED
- * GPIO pin is returned in.
- *
- * Returns : BP_SUCCESS - Success, value is returned.
- * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- * BP_VALUE_NOT_DEFINED - At least one return value is not defined
- * for the board.
- ***************************************************************************/
-int BpGetHpnaLedGpio( unsigned short *pusValue );
-
-/**************************************************************************
- * Name : BpGetWanDataLedGpio
- *
- * Description: This function returns the GPIO pin assignment for the WAN Data
- * LED.
- *
- * Parameters : [OUT] pusValue - Address of short word that the WAN Data LED
- * GPIO pin is returned in.
- *
- * Returns : BP_SUCCESS - Success, value is returned.
- * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- * BP_VALUE_NOT_DEFINED - At least one return value is not defined
- * for the board.
- ***************************************************************************/
-int BpGetWanDataLedGpio( unsigned short *pusValue );
-
-/**************************************************************************
- * Name : BpGetPppLedGpio
- *
- * Description: This function returns the GPIO pin assignment for the PPP
- * LED.
- *
- * Parameters : [OUT] pusValue - Address of short word that the PPP LED
- * GPIO pin is returned in.
- *
- * Returns : BP_SUCCESS - Success, value is returned.
- * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- * BP_VALUE_NOT_DEFINED - At least one return value is not defined
- * for the board.
- ***************************************************************************/
-int BpGetPppLedGpio( unsigned short *pusValue );
-
-/**************************************************************************
- * Name : BpGetPppFailLedGpio
- *
- * Description: This function returns the GPIO pin assignment for the PPP
- * LED that is used when there is a PPP connection failure.
- *
- * Parameters : [OUT] pusValue - Address of short word that the PPP LED
- * GPIO pin is returned in.
- *
- * Returns : BP_SUCCESS - Success, value is returned.
- * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- * BP_VALUE_NOT_DEFINED - At least one return value is not defined
- * for the board.
- ***************************************************************************/
-int BpGetPppFailLedGpio( unsigned short *pusValue );
-
-/**************************************************************************
- * Name : BpGetVoipLedGpio
- *
- * Description: This function returns the GPIO pin assignment for the VOIP
- * LED.
- *
- * Parameters : [OUT] pusValue - Address of short word that the VOIP LED
- * GPIO pin is returned in.
- *
- * Returns : BP_SUCCESS - Success, value is returned.
- * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- * BP_VALUE_NOT_DEFINED - At least one return value is not defined
- * for the board.
- ***************************************************************************/
-int BpGetVoipLedGpio( unsigned short *pusValue );
-
-/**************************************************************************
- * Name : BpGetBootloaderPowerOnLedGpio
- *
- * Description: This function returns the GPIO pin assignment for the power
- * on LED that is set by the bootloader.
- *
- * Parameters : [OUT] pusValue - Address of short word that the alarm LED
- * GPIO pin is returned in.
- *
- * Returns : BP_SUCCESS - Success, value is returned.
- * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- * BP_VALUE_NOT_DEFINED - At least one return value is not defined
- * for the board.
- ***************************************************************************/
-int BpGetBootloaderPowerOnLedGpio( unsigned short *pusValue );
-
-/**************************************************************************
- * Name : BpGetBootloaderAlarmLedGpio
- *
- * Description: This function returns the GPIO pin assignment for the alarm
- * LED that is set by the bootloader.
- *
- * Parameters : [OUT] pusValue - Address of short word that the alarm LED
- * GPIO pin is returned in.
- *
- * Returns : BP_SUCCESS - Success, value is returned.
- * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- * BP_VALUE_NOT_DEFINED - At least one return value is not defined
- * for the board.
- ***************************************************************************/
-int BpGetBootloaderAlarmLedGpio( unsigned short *pusValue );
-
-/**************************************************************************
- * Name : BpGetBootloaderResetCfgLedGpio
- *
- * Description: This function returns the GPIO pin assignment for the reset
- * configuration LED that is set by the bootloader.
- *
- * Parameters : [OUT] pusValue - Address of short word that the reset
- * configuration LED GPIO pin is returned in.
- *
- * Returns : BP_SUCCESS - Success, value is returned.
- * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- * BP_VALUE_NOT_DEFINED - At least one return value is not defined
- * for the board.
- ***************************************************************************/
-int BpGetBootloaderResetCfgLedGpio( unsigned short *pusValue );
-
-/**************************************************************************
- * Name : BpGetBootloaderStopLedGpio
- *
- * Description: This function returns the GPIO pin assignment for the break
- * into bootloader LED that is set by the bootloader.
- *
- * Parameters : [OUT] pusValue - Address of short word that the break into
- * bootloader LED GPIO pin is returned in.
- *
- * Returns : BP_SUCCESS - Success, value is returned.
- * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- * BP_VALUE_NOT_DEFINED - At least one return value is not defined
- * for the board.
- ***************************************************************************/
-int BpGetBootloaderStopLedGpio( unsigned short *pusValue );
-
-/**************************************************************************
- * Name : BpGetWirelessExtIntr
- *
- * Description: This function returns the Wireless external interrupt number.
- *
- * Parameters : [OUT] pulValue - Address of short word that the wireless
- * external interrupt number is returned in.
- *
- * Returns : BP_SUCCESS - Success, value is returned.
- * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- * BP_VALUE_NOT_DEFINED - At least one return value is not defined
- * for the board.
- ***************************************************************************/
-int BpGetWirelessExtIntr( unsigned long *pulValue );
-
-/**************************************************************************
- * Name : BpGetAdslDyingGaspExtIntr
- *
- * Description: This function returns the ADSL Dying Gasp external interrupt
- * number.
- *
- * Parameters : [OUT] pulValue - Address of short word that the ADSL Dying Gasp
- * external interrupt number is returned in.
- *
- * Returns : BP_SUCCESS - Success, value is returned.
- * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- * BP_VALUE_NOT_DEFINED - At least one return value is not defined
- * for the board.
- ***************************************************************************/
-int BpGetAdslDyingGaspExtIntr( unsigned long *pulValue );
-
-/**************************************************************************
- * Name : BpGetVoipExtIntr
- *
- * Description: This function returns the VOIP external interrupt number.
- *
- * Parameters : [OUT] pulValue - Address of short word that the VOIP
- * external interrupt number is returned in.
- * [IN] dspNum - Address of the DSP to query.
- *
- * Returns : BP_SUCCESS - Success, value is returned.
- * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- * BP_VALUE_NOT_DEFINED - At least one return value is not defined
- * for the board.
- ***************************************************************************/
-int BpGetVoipExtIntr( unsigned char dspNum, unsigned long *pulValue );
-
-/**************************************************************************
- * Name : BpGetHpnaExtIntr
- *
- * Description: This function returns the HPNA external interrupt number.
- *
- * Parameters : [OUT] pulValue - Address of short word that the HPNA
- * external interrupt number is returned in.
- *
- * Returns : BP_SUCCESS - Success, value is returned.
- * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- * BP_VALUE_NOT_DEFINED - At least one return value is not defined
- * for the board.
- ***************************************************************************/
-int BpGetHpnaExtIntr( unsigned long *pulValue );
-
-/**************************************************************************
- * Name : BpGetHpnaChipSelect
- *
- * Description: This function returns the HPNA chip select number.
- *
- * Parameters : [OUT] pulValue - Address of short word that the HPNA
- * chip select number is returned in.
- *
- * Returns : BP_SUCCESS - Success, value is returned.
- * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- * BP_VALUE_NOT_DEFINED - At least one return value is not defined
- * for the board.
- ***************************************************************************/
-int BpGetHpnaChipSelect( unsigned long *pulValue );
-
-/**************************************************************************
- * Name : BpGetVoipChipSelect
- *
- * Description: This function returns the VOIP chip select number.
- *
- * Parameters : [OUT] pulValue - Address of short word that the VOIP
- * chip select number is returned in.
- * [IN] dspNum - Address of the DSP to query.
- *
- * Returns : BP_SUCCESS - Success, value is returned.
- * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- * BP_VALUE_NOT_DEFINED - At least one return value is not defined
- * for the board.
- ***************************************************************************/
-int BpGetVoipChipSelect( unsigned char dspNum, unsigned long *pulValue );
-
-#endif /* __ASSEMBLER__ */
-
-#endif /* _BOARDPARMS_H */
-
projects / openwrt / svn-archive / archive.git / blobdiff