+++ /dev/null
-From f7f6c8aca91093e2f886ec97910b1a7d9a69bf9b Mon Sep 17 00:00:00 2001
-From: Linus Walleij <linus.walleij@linaro.org>
-Date: Wed, 9 Nov 2022 21:05:54 +0100
-Subject: [PATCH 05/29] usb: fotg2: add Gemini-specific handling
-
-The Cortina Systems Gemini has bolted on a PHY inside the
-silicon that can be handled by six bits in a MISC register in
-the system controller.
-
-If we are running on Gemini, look up a syscon regmap through
-a phandle and enable VBUS and optionally the Mini-B connector.
-
-If the device is flagged as "wakeup-source" using the standard
-DT bindings, we also enable this in the global controller for
-respective port.
-
-Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-Link: https://lore.kernel.org/r/20221109200554.1957185-1-linus.walleij@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
---- a/drivers/usb/fotg210/Kconfig
-+++ b/drivers/usb/fotg210/Kconfig
-@@ -5,6 +5,7 @@ config USB_FOTG210
- depends on USB || USB_GADGET
- depends on HAS_DMA && HAS_IOMEM
- default ARCH_GEMINI
-+ select MFD_SYSCON
- help
- Faraday FOTG210 is a dual-mode USB controller that can act
- in both host controller and peripheral controller mode.
---- a/drivers/usb/fotg210/fotg210-core.c
-+++ b/drivers/usb/fotg210/fotg210-core.c
-@@ -5,15 +5,86 @@
- * whether to proceed with probing the host or the peripheral
- * driver.
- */
-+#include <linux/bitops.h>
- #include <linux/device.h>
-+#include <linux/mfd/syscon.h>
- #include <linux/module.h>
- #include <linux/of.h>
- #include <linux/platform_device.h>
-+#include <linux/regmap.h>
- #include <linux/usb.h>
- #include <linux/usb/otg.h>
-
- #include "fotg210.h"
-
-+/*
-+ * Gemini-specific initialization function, only executed on the
-+ * Gemini SoC using the global misc control register.
-+ *
-+ * The gemini USB blocks are connected to either Mini-A (host mode) or
-+ * Mini-B (peripheral mode) plugs. There is no role switch support on the
-+ * Gemini SoC, just either-or.
-+ */
-+#define GEMINI_GLOBAL_MISC_CTRL 0x30
-+#define GEMINI_MISC_USB0_WAKEUP BIT(14)
-+#define GEMINI_MISC_USB1_WAKEUP BIT(15)
-+#define GEMINI_MISC_USB0_VBUS_ON BIT(22)
-+#define GEMINI_MISC_USB1_VBUS_ON BIT(23)
-+#define GEMINI_MISC_USB0_MINI_B BIT(29)
-+#define GEMINI_MISC_USB1_MINI_B BIT(30)
-+
-+static int fotg210_gemini_init(struct device *dev, struct resource *res,
-+ enum usb_dr_mode mode)
-+{
-+ struct device_node *np = dev->of_node;
-+ struct regmap *map;
-+ bool wakeup;
-+ u32 mask, val;
-+ int ret;
-+
-+ map = syscon_regmap_lookup_by_phandle(np, "syscon");
-+ if (IS_ERR(map)) {
-+ dev_err(dev, "no syscon\n");
-+ return PTR_ERR(map);
-+ }
-+ wakeup = of_property_read_bool(np, "wakeup-source");
-+
-+ /*
-+ * Figure out if this is USB0 or USB1 by simply checking the
-+ * physical base address.
-+ */
-+ mask = 0;
-+ if (res->start == 0x69000000) {
-+ mask = GEMINI_MISC_USB1_VBUS_ON | GEMINI_MISC_USB1_MINI_B |
-+ GEMINI_MISC_USB1_WAKEUP;
-+ if (mode == USB_DR_MODE_HOST)
-+ val = GEMINI_MISC_USB1_VBUS_ON;
-+ else
-+ val = GEMINI_MISC_USB1_MINI_B;
-+ if (wakeup)
-+ val |= GEMINI_MISC_USB1_WAKEUP;
-+ } else {
-+ mask = GEMINI_MISC_USB0_VBUS_ON | GEMINI_MISC_USB0_MINI_B |
-+ GEMINI_MISC_USB0_WAKEUP;
-+ if (mode == USB_DR_MODE_HOST)
-+ val = GEMINI_MISC_USB0_VBUS_ON;
-+ else
-+ val = GEMINI_MISC_USB0_MINI_B;
-+ if (wakeup)
-+ val |= GEMINI_MISC_USB0_WAKEUP;
-+ }
-+
-+ ret = regmap_update_bits(map, GEMINI_GLOBAL_MISC_CTRL, mask, val);
-+ if (ret) {
-+ dev_err(dev, "failed to initialize Gemini PHY\n");
-+ return ret;
-+ }
-+
-+ dev_info(dev, "initialized Gemini PHY in %s mode\n",
-+ (mode == USB_DR_MODE_HOST) ? "host" : "gadget");
-+ return 0;
-+}
-+
- static int fotg210_probe(struct platform_device *pdev)
- {
- struct device *dev = &pdev->dev;
-@@ -22,6 +93,15 @@ static int fotg210_probe(struct platform
-
- mode = usb_get_dr_mode(dev);
-
-+ if (of_device_is_compatible(dev->of_node, "cortina,gemini-usb")) {
-+ struct resource *res;
-+
-+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ ret = fotg210_gemini_init(dev, res, mode);
-+ if (ret)
-+ return ret;
-+ }
-+
- if (mode == USB_DR_MODE_PERIPHERAL)
- ret = fotg210_udc_probe(pdev);
- else