+++ /dev/null
-From 296184694ae7a4e388603c95499e98d30b21cc09 Mon Sep 17 00:00:00 2001
-From: Linus Walleij <linus.walleij@linaro.org>
-Date: Mon, 23 Jan 2023 08:39:16 +0100
-Subject: [PATCH 29/29] ARM: dts: gemini: Enable DNS313 FOTG210 as periph
-
-Add the GPIO-based VBUS phy, and enable the FOTG210
-USB1 block for use as peripheral.
-
-Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-Link: https://lore.kernel.org/r/20230123073916.2350839-2-linus.walleij@linaro.org
----
---- a/arch/arm/boot/dts/gemini-dlink-dns-313.dts
-+++ b/arch/arm/boot/dts/gemini-dlink-dns-313.dts
-@@ -80,6 +80,15 @@
- #cooling-cells = <2>;
- };
-
-+ /*
-+ * This is the type B USB connector on the device,
-+ * a GPIO-controlled USB VBUS detect
-+ */
-+ usb1_phy: phy {
-+ compatible = "gpio-usb-b-connector", "usb-b-connector";
-+ #phy-cells = <0>;
-+ vbus-gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
-+ };
-
- /* Global Mixed-Mode Technology G751 mounted on GPIO I2C */
- i2c {
-@@ -302,5 +311,13 @@
- ide@63000000 {
- status = "okay";
- };
-+
-+ usb@69000000 {
-+ status = "okay";
-+ dr_mode = "peripheral";
-+ usb-phy = <&usb1_phy>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&usb_default_pins>;
-+ };
- };
- };
---- a/arch/arm/boot/dts/gemini.dtsi
-+++ b/arch/arm/boot/dts/gemini.dtsi
-@@ -455,6 +455,8 @@
- */
- pinctrl-names = "default";
- pinctrl-0 = <&usb_default_pins>;
-+ /* Default to host mode */
-+ dr_mode = "host";
- syscon = <&syscon>;
- status = "disabled";
- };