--- /dev/null
+From 296184694ae7a4e388603c95499e98d30b21cc09 Mon Sep 17 00:00:00 2001
+From: Linus Walleij <linus.walleij@linaro.org>
+Date: Mon, 23 Jan 2023 08:39:16 +0100
+Subject: [PATCH 29/29] ARM: dts: gemini: Enable DNS313 FOTG210 as periph
+
+Add the GPIO-based VBUS phy, and enable the FOTG210
+USB1 block for use as peripheral.
+
+Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
+Link: https://lore.kernel.org/r/20230123073916.2350839-2-linus.walleij@linaro.org
+---
+--- a/arch/arm/boot/dts/gemini-dlink-dns-313.dts
++++ b/arch/arm/boot/dts/gemini-dlink-dns-313.dts
+@@ -80,6 +80,15 @@
+ #cooling-cells = <2>;
+ };
+
++ /*
++ * This is the type B USB connector on the device,
++ * a GPIO-controlled USB VBUS detect
++ */
++ usb1_phy: phy {
++ compatible = "gpio-usb-b-connector", "usb-b-connector";
++ #phy-cells = <0>;
++ vbus-gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
++ };
+
+ /* Global Mixed-Mode Technology G751 mounted on GPIO I2C */
+ i2c {
+@@ -302,5 +311,13 @@
+ ide@63000000 {
+ status = "okay";
+ };
++
++ usb@69000000 {
++ status = "okay";
++ dr_mode = "peripheral";
++ usb-phy = <&usb1_phy>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&usb_default_pins>;
++ };
+ };
+ };
+--- a/arch/arm/boot/dts/gemini.dtsi
++++ b/arch/arm/boot/dts/gemini.dtsi
+@@ -455,6 +455,8 @@
+ */
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb_default_pins>;
++ /* Default to host mode */
++ dr_mode = "host";
+ syscon = <&syscon>;
+ status = "disabled";
+ };