kernel: bump 5.15 to 5.15.156

[openwrt/staging/pepe2k.git] / target / linux / generic / backport-5.15 / 782-v6.1-net-dsa-mt7530-add-support-for-in-band-link-status.patch

diff --git a/target/linux/generic/backport-5.15/782-v6.1-net-dsa-mt7530-add-support-for-in-band-link-status.patch b/target/linux/generic/backport-5.15/782-v6.1-net-dsa-mt7530-add-support-for-in-band-link-status.patch
index 7b89dbc20671d1a907b6904c6ec50a1d825d18ec..acb67ab1614be50115902aef25ac4b7dff730d1c 100644 (file)
--- a/target/linux/generic/backport-5.15/782-v6.1-net-dsa-mt7530-add-support-for-in-band-link-status.patch
+++ b/target/linux/generic/backport-5.15/782-v6.1-net-dsa-mt7530-add-support-for-in-band-link-status.patch
@@ -19,7 +19,7 @@ Signed-off-by: David S. Miller <davem@davemloft.net>
 
 --- a/drivers/net/dsa/mt7530.c
 +++ b/drivers/net/dsa/mt7530.c
-@@ -2791,9 +2791,6 @@ mt7531_mac_config(struct dsa_switch *ds,
+@@ -2952,9 +2952,6 @@ mt7531_mac_config(struct dsa_switch *ds,
        case PHY_INTERFACE_MODE_NA:
        case PHY_INTERFACE_MODE_1000BASEX:
        case PHY_INTERFACE_MODE_2500BASEX:
@@ -29,7 +29,7 @@ Signed-off-by: David S. Miller <davem@davemloft.net>
                return mt7531_sgmii_setup_mode_force(priv, port, interface);
        default:
                return -EINVAL;
-@@ -2869,13 +2866,6 @@ unsupported:
+@@ -3030,13 +3027,6 @@ unsupported:
                return;
        }
  
@@ -43,7 +43,7 @@ Signed-off-by: David S. Miller <davem@davemloft.net>
        mcr_cur = mt7530_read(priv, MT7530_PMCR_P(port));
        mcr_new = mcr_cur;
        mcr_new &= ~PMCR_LINK_SETTINGS_MASK;
-@@ -3012,6 +3002,9 @@ static void mt753x_phylink_get_caps(stru
+@@ -3173,6 +3163,9 @@ static void mt753x_phylink_get_caps(stru
        config->mac_capabilities = MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
                                   MAC_10 | MAC_100 | MAC_1000FD;
  
@@ -53,7 +53,7 @@ Signed-off-by: David S. Miller <davem@davemloft.net>
        /* This driver does not make use of the speed, duplex, pause or the
         * advertisement in its mac_config, so it is safe to mark this driver
         * as non-legacy.
-@@ -3077,6 +3070,7 @@ mt7531_sgmii_pcs_get_state_an(struct mt7
+@@ -3238,6 +3231,7 @@ mt7531_sgmii_pcs_get_state_an(struct mt7
  
        status = mt7530_read(priv, MT7531_PCS_CONTROL_1(port));
        state->link = !!(status & MT7531_SGMII_LINK_STATUS);
@@ -61,7 +61,7 @@ Signed-off-by: David S. Miller <davem@davemloft.net>
        if (state->interface == PHY_INTERFACE_MODE_SGMII &&
            (status & MT7531_SGMII_AN_ENABLE)) {
                val = mt7530_read(priv, MT7531_PCS_SPEED_ABILITY(port));
-@@ -3107,16 +3101,44 @@ mt7531_sgmii_pcs_get_state_an(struct mt7
+@@ -3268,16 +3262,44 @@ mt7531_sgmii_pcs_get_state_an(struct mt7
        return 0;
  }
  
@@ -109,7 +109,7 @@ Signed-off-by: David S. Miller <davem@davemloft.net>
  }
  
  static int mt753x_pcs_config(struct phylink_pcs *pcs, unsigned int mode,
-@@ -3157,6 +3179,8 @@ mt753x_setup(struct dsa_switch *ds)
+@@ -3318,6 +3340,8 @@ mt753x_setup(struct dsa_switch *ds)
                priv->pcs[i].pcs.ops = priv->info->pcs_ops;
                priv->pcs[i].priv = priv;
                priv->pcs[i].port = i;
@@ -120,7 +120,7 @@ Signed-off-by: David S. Miller <davem@davemloft.net>
        ret = priv->info->sw_setup(ds);
 --- a/drivers/net/dsa/mt7530.h
 +++ b/drivers/net/dsa/mt7530.h
-@@ -400,6 +400,7 @@ enum mt7530_vlan_port_acc_frm {
+@@ -405,6 +405,7 @@ enum mt7530_vlan_port_acc_frm {
  #define  MT7531_SGMII_LINK_STATUS     BIT(18)
  #define  MT7531_SGMII_AN_ENABLE               BIT(12)
  #define  MT7531_SGMII_AN_RESTART      BIT(9)