+++ /dev/null
-From 8eceed6dbd74067dbf4d8e39f14734f4d2f35176 Mon Sep 17 00:00:00 2001
-From: Daniel Golle <daniel@makrotopia.org>
-Date: Mon, 3 Apr 2023 02:19:13 +0100
-Subject: [PATCH 10/13] net: dsa: mt7530: introduce separate MDIO driver
-
-Split MT7530 switch driver into a common part and a part specific
-for MDIO connected switches and multi-chip modules.
-Move MDIO-specific functions to newly introduced mt7530-mdio.c while
-keeping the common parts in mt7530.c.
-Introduce new Kconfig symbol CONFIG_NET_DSA_MT7530_MDIO which is
-implied by CONFIG_NET_DSA_MT7530.
-
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- MAINTAINERS | 1 +
- drivers/net/dsa/Kconfig | 16 +-
- drivers/net/dsa/Makefile | 1 +
- drivers/net/dsa/mt7530-mdio.c | 271 ++++++++++++++++++++++++++++++++++
- drivers/net/dsa/mt7530.c | 264 +--------------------------------
- drivers/net/dsa/mt7530.h | 6 +
- 6 files changed, 301 insertions(+), 258 deletions(-)
- create mode 100644 drivers/net/dsa/mt7530-mdio.c
-
---- a/MAINTAINERS
-+++ b/MAINTAINERS
-@@ -13069,6 +13069,7 @@ M: Landen Chao <Landen.Chao@mediatek.com
- M: DENG Qingfang <dqfext@gmail.com>
- L: netdev@vger.kernel.org
- S: Maintained
-+F: drivers/net/dsa/mt7530-mdio.c
- F: drivers/net/dsa/mt7530.*
- F: net/dsa/tag_mtk.c
-
---- a/drivers/net/dsa/Kconfig
-+++ b/drivers/net/dsa/Kconfig
-@@ -37,10 +37,22 @@ config NET_DSA_MT7530
- tristate "MediaTek MT753x and MT7621 Ethernet switch support"
- select NET_DSA_TAG_MTK
- select MEDIATEK_GE_PHY
-+ imply NET_DSA_MT7530_MDIO
-+ help
-+ This enables support for the MediaTek MT7530 and MT7531 Ethernet
-+ switch chips. Multi-chip module MT7530 in MT7621AT, MT7621DAT,
-+ MT7621ST and MT7623AI SoCs, and built-in switch in MT7988 SoC are
-+ supported as well.
-+
-+config NET_DSA_MT7530_MDIO
-+ tristate "MediaTek MT7530 MDIO interface driver"
-+ depends on NET_DSA_MT7530
- select PCS_MTK_LYNXI
- help
-- This enables support for the MediaTek MT7530, MT7531, and MT7621
-- Ethernet switch chips.
-+ This enables support for the MediaTek MT7530 and MT7531 switch
-+ chips which are connected via MDIO, as well as multi-chip
-+ module MT7530 which can be found in the MT7621AT, MT7621DAT,
-+ MT7621ST and MT7623AI SoCs.
-
- config NET_DSA_MV88E6060
- tristate "Marvell 88E6060 ethernet switch chip support"
---- a/drivers/net/dsa/Makefile
-+++ b/drivers/net/dsa/Makefile
-@@ -7,6 +7,7 @@ obj-$(CONFIG_FIXED_PHY) += dsa_loop_bdi
- endif
- obj-$(CONFIG_NET_DSA_LANTIQ_GSWIP) += lantiq_gswip.o
- obj-$(CONFIG_NET_DSA_MT7530) += mt7530.o
-+obj-$(CONFIG_NET_DSA_MT7530_MDIO) += mt7530-mdio.o
- obj-$(CONFIG_NET_DSA_MV88E6060) += mv88e6060.o
- obj-$(CONFIG_NET_DSA_RZN1_A5PSW) += rzn1_a5psw.o
- obj-$(CONFIG_NET_DSA_SMSC_LAN9303) += lan9303-core.o
---- /dev/null
-+++ b/drivers/net/dsa/mt7530-mdio.c
-@@ -0,0 +1,271 @@
-+// SPDX-License-Identifier: GPL-2.0-only
-+
-+#include <linux/gpio/consumer.h>
-+#include <linux/mdio.h>
-+#include <linux/module.h>
-+#include <linux/pcs/pcs-mtk-lynxi.h>
-+#include <linux/of_irq.h>
-+#include <linux/of_mdio.h>
-+#include <linux/of_net.h>
-+#include <linux/of_platform.h>
-+#include <linux/regmap.h>
-+#include <linux/reset.h>
-+#include <linux/regulator/consumer.h>
-+#include <net/dsa.h>
-+
-+#include "mt7530.h"
-+
-+static int
-+mt7530_regmap_write(void *context, unsigned int reg, unsigned int val)
-+{
-+ struct mii_bus *bus = context;
-+ u16 page, r, lo, hi;
-+ int ret;
-+
-+ page = (reg >> 6) & 0x3ff;
-+ r = (reg >> 2) & 0xf;
-+ lo = val & 0xffff;
-+ hi = val >> 16;
-+
-+ /* MT7530 uses 31 as the pseudo port */
-+ ret = bus->write(bus, 0x1f, 0x1f, page);
-+ if (ret < 0)
-+ return ret;
-+
-+ ret = bus->write(bus, 0x1f, r, lo);
-+ if (ret < 0)
-+ return ret;
-+
-+ ret = bus->write(bus, 0x1f, 0x10, hi);
-+ return ret;
-+}
-+
-+static int
-+mt7530_regmap_read(void *context, unsigned int reg, unsigned int *val)
-+{
-+ struct mii_bus *bus = context;
-+ u16 page, r, lo, hi;
-+ int ret;
-+
-+ page = (reg >> 6) & 0x3ff;
-+ r = (reg >> 2) & 0xf;
-+
-+ /* MT7530 uses 31 as the pseudo port */
-+ ret = bus->write(bus, 0x1f, 0x1f, page);
-+ if (ret < 0)
-+ return ret;
-+
-+ lo = bus->read(bus, 0x1f, r);
-+ hi = bus->read(bus, 0x1f, 0x10);
-+
-+ *val = (hi << 16) | (lo & 0xffff);
-+
-+ return 0;
-+}
-+
-+static void
-+mt7530_mdio_regmap_lock(void *mdio_lock)
-+{
-+ mutex_lock_nested(mdio_lock, MDIO_MUTEX_NESTED);
-+}
-+
-+static void
-+mt7530_mdio_regmap_unlock(void *mdio_lock)
-+{
-+ mutex_unlock(mdio_lock);
-+}
-+
-+static const struct regmap_bus mt7530_regmap_bus = {
-+ .reg_write = mt7530_regmap_write,
-+ .reg_read = mt7530_regmap_read,
-+};
-+
-+static int
-+mt7531_create_sgmii(struct mt7530_priv *priv)
-+{
-+ struct regmap_config *mt7531_pcs_config[2];
-+ struct phylink_pcs *pcs;
-+ struct regmap *regmap;
-+ int i, ret = 0;
-+
-+ for (i = 0; i < 2; i++) {
-+ mt7531_pcs_config[i] = devm_kzalloc(priv->dev,
-+ sizeof(struct regmap_config),
-+ GFP_KERNEL);
-+ if (!mt7531_pcs_config[i]) {
-+ ret = -ENOMEM;
-+ break;
-+ }
-+
-+ mt7531_pcs_config[i]->name = i ? "port6" : "port5";
-+ mt7531_pcs_config[i]->reg_bits = 16;
-+ mt7531_pcs_config[i]->val_bits = 32;
-+ mt7531_pcs_config[i]->reg_stride = 4;
-+ mt7531_pcs_config[i]->reg_base = MT7531_SGMII_REG_BASE(5 + i);
-+ mt7531_pcs_config[i]->max_register = 0x17c;
-+ mt7531_pcs_config[i]->lock = mt7530_mdio_regmap_lock;
-+ mt7531_pcs_config[i]->unlock = mt7530_mdio_regmap_unlock;
-+ mt7531_pcs_config[i]->lock_arg = &priv->bus->mdio_lock;
-+
-+ regmap = devm_regmap_init(priv->dev,
-+ &mt7530_regmap_bus, priv->bus,
-+ mt7531_pcs_config[i]);
-+ if (IS_ERR(regmap)) {
-+ ret = PTR_ERR(regmap);
-+ break;
-+ }
-+ pcs = mtk_pcs_lynxi_create(priv->dev, regmap,
-+ MT7531_PHYA_CTRL_SIGNAL3, 0);
-+ if (!pcs) {
-+ ret = -ENXIO;
-+ break;
-+ }
-+ priv->ports[5 + i].sgmii_pcs = pcs;
-+ }
-+
-+ if (ret && i)
-+ mtk_pcs_lynxi_destroy(priv->ports[5].sgmii_pcs);
-+
-+ return ret;
-+}
-+
-+static const struct of_device_id mt7530_of_match[] = {
-+ { .compatible = "mediatek,mt7621", .data = &mt753x_table[ID_MT7621], },
-+ { .compatible = "mediatek,mt7530", .data = &mt753x_table[ID_MT7530], },
-+ { .compatible = "mediatek,mt7531", .data = &mt753x_table[ID_MT7531], },
-+ { /* sentinel */ },
-+};
-+MODULE_DEVICE_TABLE(of, mt7530_of_match);
-+
-+static int
-+mt7530_probe(struct mdio_device *mdiodev)
-+{
-+ static struct regmap_config *regmap_config;
-+ struct mt7530_priv *priv;
-+ struct device_node *dn;
-+ int ret;
-+
-+ dn = mdiodev->dev.of_node;
-+
-+ priv = devm_kzalloc(&mdiodev->dev, sizeof(*priv), GFP_KERNEL);
-+ if (!priv)
-+ return -ENOMEM;
-+
-+ priv->bus = mdiodev->bus;
-+ priv->dev = &mdiodev->dev;
-+
-+ ret = mt7530_probe_common(priv);
-+ if (ret)
-+ return ret;
-+
-+ /* Use medatek,mcm property to distinguish hardware type that would
-+ * cause a little bit differences on power-on sequence.
-+ * Not MCM that indicates switch works as the remote standalone
-+ * integrated circuit so the GPIO pin would be used to complete
-+ * the reset, otherwise memory-mapped register accessing used
-+ * through syscon provides in the case of MCM.
-+ */
-+ priv->mcm = of_property_read_bool(dn, "mediatek,mcm");
-+ if (priv->mcm) {
-+ dev_info(&mdiodev->dev, "MT7530 adapts as multi-chip module\n");
-+
-+ priv->rstc = devm_reset_control_get(&mdiodev->dev, "mcm");
-+ if (IS_ERR(priv->rstc)) {
-+ dev_err(&mdiodev->dev, "Couldn't get our reset line\n");
-+ return PTR_ERR(priv->rstc);
-+ }
-+ } else {
-+ priv->reset = devm_gpiod_get_optional(&mdiodev->dev, "reset",
-+ GPIOD_OUT_LOW);
-+ if (IS_ERR(priv->reset)) {
-+ dev_err(&mdiodev->dev, "Couldn't get our reset line\n");
-+ return PTR_ERR(priv->reset);
-+ }
-+ }
-+
-+ if (priv->id == ID_MT7530) {
-+ priv->core_pwr = devm_regulator_get(&mdiodev->dev, "core");
-+ if (IS_ERR(priv->core_pwr))
-+ return PTR_ERR(priv->core_pwr);
-+
-+ priv->io_pwr = devm_regulator_get(&mdiodev->dev, "io");
-+ if (IS_ERR(priv->io_pwr))
-+ return PTR_ERR(priv->io_pwr);
-+ }
-+
-+ regmap_config = devm_kzalloc(&mdiodev->dev, sizeof(*regmap_config),
-+ GFP_KERNEL);
-+ if (!regmap_config)
-+ return -ENOMEM;
-+
-+ regmap_config->reg_bits = 16;
-+ regmap_config->val_bits = 32;
-+ regmap_config->reg_stride = 4;
-+ regmap_config->max_register = MT7530_CREV;
-+ regmap_config->disable_locking = true;
-+ priv->regmap = devm_regmap_init(priv->dev, &mt7530_regmap_bus,
-+ priv->bus, regmap_config);
-+ if (IS_ERR(priv->regmap))
-+ return PTR_ERR(priv->regmap);
-+
-+ if (priv->id == ID_MT7531) {
-+ ret = mt7531_create_sgmii(priv);
-+ if (ret)
-+ return ret;
-+ }
-+
-+ return dsa_register_switch(priv->ds);
-+}
-+
-+static void
-+mt7530_remove(struct mdio_device *mdiodev)
-+{
-+ struct mt7530_priv *priv = dev_get_drvdata(&mdiodev->dev);
-+ int ret = 0, i;
-+
-+ if (!priv)
-+ return;
-+
-+ ret = regulator_disable(priv->core_pwr);
-+ if (ret < 0)
-+ dev_err(priv->dev,
-+ "Failed to disable core power: %d\n", ret);
-+
-+ ret = regulator_disable(priv->io_pwr);
-+ if (ret < 0)
-+ dev_err(priv->dev, "Failed to disable io pwr: %d\n",
-+ ret);
-+
-+ mt7530_remove_common(priv);
-+
-+ for (i = 0; i < 2; ++i)
-+ mtk_pcs_lynxi_destroy(priv->ports[5 + i].sgmii_pcs);
-+}
-+
-+static void mt7530_shutdown(struct mdio_device *mdiodev)
-+{
-+ struct mt7530_priv *priv = dev_get_drvdata(&mdiodev->dev);
-+
-+ if (!priv)
-+ return;
-+
-+ dsa_switch_shutdown(priv->ds);
-+
-+ dev_set_drvdata(&mdiodev->dev, NULL);
-+}
-+
-+static struct mdio_driver mt7530_mdio_driver = {
-+ .probe = mt7530_probe,
-+ .remove = mt7530_remove,
-+ .shutdown = mt7530_shutdown,
-+ .mdiodrv.driver = {
-+ .name = "mt7530-mdio",
-+ .of_match_table = mt7530_of_match,
-+ },
-+};
-+
-+mdio_module_driver(mt7530_mdio_driver);
-+
-+MODULE_AUTHOR("Sean Wang <sean.wang@mediatek.com>");
-+MODULE_DESCRIPTION("Driver for Mediatek MT7530 Switch (MDIO)");
-+MODULE_LICENSE("GPL");
---- a/drivers/net/dsa/mt7530.c
-+++ b/drivers/net/dsa/mt7530.c
-@@ -14,7 +14,6 @@
- #include <linux/of_mdio.h>
- #include <linux/of_net.h>
- #include <linux/of_platform.h>
--#include <linux/pcs/pcs-mtk-lynxi.h>
- #include <linux/phylink.h>
- #include <linux/regmap.h>
- #include <linux/regulator/consumer.h>
-@@ -192,31 +191,6 @@ core_clear(struct mt7530_priv *priv, u32
- }
-
- static int
--mt7530_regmap_write(void *context, unsigned int reg, unsigned int val)
--{
-- struct mii_bus *bus = context;
-- u16 page, r, lo, hi;
-- int ret;
--
-- page = (reg >> 6) & 0x3ff;
-- r = (reg >> 2) & 0xf;
-- lo = val & 0xffff;
-- hi = val >> 16;
--
-- /* MT7530 uses 31 as the pseudo port */
-- ret = bus->write(bus, 0x1f, 0x1f, page);
-- if (ret < 0)
-- return ret;
--
-- ret = bus->write(bus, 0x1f, r, lo);
-- if (ret < 0)
-- return ret;
--
-- ret = bus->write(bus, 0x1f, 0x10, hi);
-- return ret;
--}
--
--static int
- mt7530_mii_write(struct mt7530_priv *priv, u32 reg, u32 val)
- {
- int ret;
-@@ -230,29 +204,6 @@ mt7530_mii_write(struct mt7530_priv *pri
- return ret;
- }
-
--static int
--mt7530_regmap_read(void *context, unsigned int reg, unsigned int *val)
--{
-- struct mii_bus *bus = context;
-- u16 page, r, lo, hi;
-- int ret;
--
-- page = (reg >> 6) & 0x3ff;
-- r = (reg >> 2) & 0xf;
--
-- /* MT7530 uses 31 as the pseudo port */
-- ret = bus->write(bus, 0x1f, 0x1f, page);
-- if (ret < 0)
-- return ret;
--
-- lo = bus->read(bus, 0x1f, r);
-- hi = bus->read(bus, 0x1f, 0x10);
--
-- *val = (hi << 16) | (lo & 0xffff);
--
-- return 0;
--}
--
- static u32
- mt7530_mii_read(struct mt7530_priv *priv, u32 reg)
- {
-@@ -2975,72 +2926,6 @@ static const struct phylink_pcs_ops mt75
- .pcs_an_restart = mt7530_pcs_an_restart,
- };
-
--static void
--mt7530_mdio_regmap_lock(void *mdio_lock)
--{
-- mutex_lock_nested(mdio_lock, MDIO_MUTEX_NESTED);
--}
--
--static void
--mt7530_mdio_regmap_unlock(void *mdio_lock)
--{
-- mutex_unlock(mdio_lock);
--}
--
--static const struct regmap_bus mt7530_regmap_bus = {
-- .reg_write = mt7530_regmap_write,
-- .reg_read = mt7530_regmap_read,
--};
--
--static int
--mt7531_create_sgmii(struct mt7530_priv *priv)
--{
-- struct regmap_config *mt7531_pcs_config[2];
-- struct phylink_pcs *pcs;
-- struct regmap *regmap;
-- int i, ret = 0;
--
-- for (i = 0; i < 2; i++) {
-- mt7531_pcs_config[i] = devm_kzalloc(priv->dev,
-- sizeof(struct regmap_config),
-- GFP_KERNEL);
-- if (!mt7531_pcs_config[i]) {
-- ret = -ENOMEM;
-- break;
-- }
--
-- mt7531_pcs_config[i]->name = i ? "port6" : "port5";
-- mt7531_pcs_config[i]->reg_bits = 16;
-- mt7531_pcs_config[i]->val_bits = 32;
-- mt7531_pcs_config[i]->reg_stride = 4;
-- mt7531_pcs_config[i]->reg_base = MT7531_SGMII_REG_BASE(5 + i);
-- mt7531_pcs_config[i]->max_register = 0x17c;
-- mt7531_pcs_config[i]->lock = mt7530_mdio_regmap_lock;
-- mt7531_pcs_config[i]->unlock = mt7530_mdio_regmap_unlock;
-- mt7531_pcs_config[i]->lock_arg = &priv->bus->mdio_lock;
--
-- regmap = devm_regmap_init(priv->dev,
-- &mt7530_regmap_bus, priv->bus,
-- mt7531_pcs_config[i]);
-- if (IS_ERR(regmap)) {
-- ret = PTR_ERR(regmap);
-- break;
-- }
-- pcs = mtk_pcs_lynxi_create(priv->dev, regmap,
-- MT7531_PHYA_CTRL_SIGNAL3, 0);
-- if (!pcs) {
-- ret = -ENXIO;
-- break;
-- }
-- priv->ports[5 + i].sgmii_pcs = pcs;
-- }
--
-- if (ret && i)
-- mtk_pcs_lynxi_destroy(priv->ports[5].sgmii_pcs);
--
-- return ret;
--}
--
- static int
- mt753x_setup(struct dsa_switch *ds)
- {
-@@ -3099,7 +2984,7 @@ static int mt753x_set_mac_eee(struct dsa
- return 0;
- }
-
--static const struct dsa_switch_ops mt7530_switch_ops = {
-+const struct dsa_switch_ops mt7530_switch_ops = {
- .get_tag_protocol = mtk_get_tag_protocol,
- .setup = mt753x_setup,
- .get_strings = mt7530_get_strings,
-@@ -3133,8 +3018,9 @@ static const struct dsa_switch_ops mt753
- .get_mac_eee = mt753x_get_mac_eee,
- .set_mac_eee = mt753x_set_mac_eee,
- };
-+EXPORT_SYMBOL_GPL(mt7530_switch_ops);
-
--static const struct mt753x_info mt753x_table[] = {
-+const struct mt753x_info mt753x_table[] = {
- [ID_MT7621] = {
- .id = ID_MT7621,
- .pcs_ops = &mt7530_pcs_ops,
-@@ -3167,16 +3053,9 @@ static const struct mt753x_info mt753x_t
- .mac_port_config = mt7531_mac_config,
- },
- };
-+EXPORT_SYMBOL_GPL(mt753x_table);
-
--static const struct of_device_id mt7530_of_match[] = {
-- { .compatible = "mediatek,mt7621", .data = &mt753x_table[ID_MT7621], },
-- { .compatible = "mediatek,mt7530", .data = &mt753x_table[ID_MT7530], },
-- { .compatible = "mediatek,mt7531", .data = &mt753x_table[ID_MT7531], },
-- { /* sentinel */ },
--};
--MODULE_DEVICE_TABLE(of, mt7530_of_match);
--
--static int
-+int
- mt7530_probe_common(struct mt7530_priv *priv)
- {
- struct device *dev = priv->dev;
-@@ -3213,88 +3092,9 @@ mt7530_probe_common(struct mt7530_priv *
-
- return 0;
- }
-+EXPORT_SYMBOL_GPL(mt7530_probe_common);
-
--static int
--mt7530_probe(struct mdio_device *mdiodev)
--{
-- static struct regmap_config *regmap_config;
-- struct mt7530_priv *priv;
-- struct device_node *dn;
-- int ret;
--
-- dn = mdiodev->dev.of_node;
--
-- priv = devm_kzalloc(&mdiodev->dev, sizeof(*priv), GFP_KERNEL);
-- if (!priv)
-- return -ENOMEM;
--
-- priv->bus = mdiodev->bus;
-- priv->dev = &mdiodev->dev;
--
-- ret = mt7530_probe_common(priv);
-- if (ret)
-- return ret;
--
-- /* Use medatek,mcm property to distinguish hardware type that would
-- * cause a little bit differences on power-on sequence.
-- * Not MCM that indicates switch works as the remote standalone
-- * integrated circuit so the GPIO pin would be used to complete
-- * the reset, otherwise memory-mapped register accessing used
-- * through syscon provides in the case of MCM.
-- */
-- priv->mcm = of_property_read_bool(dn, "mediatek,mcm");
-- if (priv->mcm) {
-- dev_info(&mdiodev->dev, "MT7530 adapts as multi-chip module\n");
--
-- priv->rstc = devm_reset_control_get(&mdiodev->dev, "mcm");
-- if (IS_ERR(priv->rstc)) {
-- dev_err(&mdiodev->dev, "Couldn't get our reset line\n");
-- return PTR_ERR(priv->rstc);
-- }
-- } else {
-- priv->reset = devm_gpiod_get_optional(&mdiodev->dev, "reset",
-- GPIOD_OUT_LOW);
-- if (IS_ERR(priv->reset)) {
-- dev_err(&mdiodev->dev, "Couldn't get our reset line\n");
-- return PTR_ERR(priv->reset);
-- }
-- }
--
-- if (priv->id == ID_MT7530) {
-- priv->core_pwr = devm_regulator_get(&mdiodev->dev, "core");
-- if (IS_ERR(priv->core_pwr))
-- return PTR_ERR(priv->core_pwr);
--
-- priv->io_pwr = devm_regulator_get(&mdiodev->dev, "io");
-- if (IS_ERR(priv->io_pwr))
-- return PTR_ERR(priv->io_pwr);
-- }
--
-- regmap_config = devm_kzalloc(&mdiodev->dev, sizeof(*regmap_config),
-- GFP_KERNEL);
-- if (!regmap_config)
-- return -ENOMEM;
--
-- regmap_config->reg_bits = 16;
-- regmap_config->val_bits = 32;
-- regmap_config->reg_stride = 4;
-- regmap_config->max_register = MT7530_CREV;
-- regmap_config->disable_locking = true;
-- priv->regmap = devm_regmap_init(priv->dev, &mt7530_regmap_bus,
-- priv->bus, regmap_config);
-- if (IS_ERR(priv->regmap))
-- return PTR_ERR(priv->regmap);
--
-- if (priv->id == ID_MT7531) {
-- ret = mt7531_create_sgmii(priv);
-- if (ret)
-- return ret;
-- }
--
-- return dsa_register_switch(priv->ds);
--}
--
--static void
-+void
- mt7530_remove_common(struct mt7530_priv *priv)
- {
- if (priv->irq)
-@@ -3304,55 +3104,7 @@ mt7530_remove_common(struct mt7530_priv
-
- mutex_destroy(&priv->reg_mutex);
- }
--
--static void
--mt7530_remove(struct mdio_device *mdiodev)
--{
-- struct mt7530_priv *priv = dev_get_drvdata(&mdiodev->dev);
-- int ret = 0, i;
--
-- if (!priv)
-- return;
--
-- ret = regulator_disable(priv->core_pwr);
-- if (ret < 0)
-- dev_err(priv->dev,
-- "Failed to disable core power: %d\n", ret);
--
-- ret = regulator_disable(priv->io_pwr);
-- if (ret < 0)
-- dev_err(priv->dev, "Failed to disable io pwr: %d\n",
-- ret);
--
-- mt7530_remove_common(priv);
--
-- for (i = 0; i < 2; ++i)
-- mtk_pcs_lynxi_destroy(priv->ports[5 + i].sgmii_pcs);
--}
--
--static void mt7530_shutdown(struct mdio_device *mdiodev)
--{
-- struct mt7530_priv *priv = dev_get_drvdata(&mdiodev->dev);
--
-- if (!priv)
-- return;
--
-- dsa_switch_shutdown(priv->ds);
--
-- dev_set_drvdata(&mdiodev->dev, NULL);
--}
--
--static struct mdio_driver mt7530_mdio_driver = {
-- .probe = mt7530_probe,
-- .remove = mt7530_remove,
-- .shutdown = mt7530_shutdown,
-- .mdiodrv.driver = {
-- .name = "mt7530",
-- .of_match_table = mt7530_of_match,
-- },
--};
--
--mdio_module_driver(mt7530_mdio_driver);
-+EXPORT_SYMBOL_GPL(mt7530_remove_common);
-
- MODULE_AUTHOR("Sean Wang <sean.wang@mediatek.com>");
- MODULE_DESCRIPTION("Driver for Mediatek MT7530 Switch");
---- a/drivers/net/dsa/mt7530.h
-+++ b/drivers/net/dsa/mt7530.h
-@@ -814,4 +814,10 @@ static inline void INIT_MT7530_DUMMY_POL
- p->reg = reg;
- }
-
-+int mt7530_probe_common(struct mt7530_priv *priv);
-+void mt7530_remove_common(struct mt7530_priv *priv);
-+
-+extern const struct dsa_switch_ops mt7530_switch_ops;
-+extern const struct mt753x_info mt753x_table[];
-+
- #endif /* __MT7530_H */
projects / openwrt / openwrt.git / blobdiff