kernel: remove support for kernel 4.19

[openwrt/staging/dedeckeh.git] / target / linux / generic / pending-4.19 / 751-net-phylink-make-Broadcom-BCM84881-based-SFPs-work.patch

diff --git a/target/linux/generic/pending-4.19/751-net-phylink-make-Broadcom-BCM84881-based-SFPs-work.patch b/target/linux/generic/pending-4.19/751-net-phylink-make-Broadcom-BCM84881-based-SFPs-work.patch
deleted file mode 100644 (file)
index 1724d44..0000000
--- a/target/linux/generic/pending-4.19/751-net-phylink-make-Broadcom-BCM84881-based-SFPs-work.patch
+++ /dev/null
@@ -1,58 +0,0 @@
-From 3d8592a23dd67fb78ad85ddf711a059d3880fcb4 Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Date: Fri, 8 Nov 2019 17:19:16 +0000
-Subject: [PATCH 654/660] net: phylink: make Broadcom BCM84881 based SFPs work
-
-The Broadcom BCM84881 does not appear to send the SGMII control word
-when operating in SGMII mode, which causes network adapters to fail
-to link with the PHY, or decide to operate at fixed 1G speed, even if
-the PHY negotiated 100M.
-
-Work around this by detecting the Broadcom BCM84881 and switch to phy
-mode rather than inband mode.
-
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
- drivers/net/phy/phylink.c | 17 ++++++++++++++++-
- 1 file changed, 16 insertions(+), 1 deletion(-)
-
---- a/drivers/net/phy/phylink.c
-+++ b/drivers/net/phy/phylink.c
-@@ -1787,12 +1787,22 @@ static void phylink_sfp_link_up(void *up
-       phylink_run_resolve(pl);
- }
- 
-+/* The Broadcom BCM84881 in the Methode DM7052 is unable to provide a SGMII
-+ * or 802.3z control word, so inband will not work.
-+ */
-+static bool phylink_phy_no_inband(struct phy_device *phy)
-+{
-+      return phy->is_c45 &&
-+              (phy->c45_ids.device_ids[1] & 0xfffffff0) == 0xae025150;
-+}
-+
- static int phylink_sfp_connect_phy(void *upstream, struct phy_device *phy)
- {
-       struct phylink *pl = upstream;
-       __ETHTOOL_DECLARE_LINK_MODE_MASK(supported);
-       __ETHTOOL_DECLARE_LINK_MODE_MASK(advertising);
-       phy_interface_t interface;
-+      u8 mode;
-       int ret;
- 
-       /*
-@@ -1807,8 +1817,13 @@ static int phylink_sfp_connect_phy(void
-       ethtool_convert_legacy_u32_to_link_mode(supported, phy->supported);
-       ethtool_convert_legacy_u32_to_link_mode(advertising, phy->advertising);
- 
-+      if (phylink_phy_no_inband(phy))
-+              mode = MLO_AN_PHY;
-+      else
-+              mode = MLO_AN_INBAND;
-+
-       /* Do the initial configuration */
--      ret = phylink_sfp_config(pl, ML_AN_INBAND, supported, advertising);
-+      ret = phylink_sfp_config(pl, mode, supported, advertising);
-       if (ret < 0)
-               return ret;
-