generic: 5.15: copy config and patch from 5.10
[openwrt/openwrt.git] / target / linux / generic / pending-5.15 / 810-pci_disable_common_quirks.patch
diff --git a/target/linux/generic/pending-5.15/810-pci_disable_common_quirks.patch b/target/linux/generic/pending-5.15/810-pci_disable_common_quirks.patch
new file mode 100644 (file)
index 0000000..62f6fed
--- /dev/null
@@ -0,0 +1,62 @@
+From: Gabor Juhos <juhosg@openwrt.org>
+Subject: debloat: add kernel config option to disabling common PCI quirks
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+---
+ drivers/pci/Kconfig  | 6 ++++++
+ drivers/pci/quirks.c | 6 ++++++
+ 2 files changed, 12 insertions(+)
+
+--- a/drivers/pci/Kconfig
++++ b/drivers/pci/Kconfig
+@@ -118,6 +118,13 @@ config XEN_PCIDEV_FRONTEND
+         The PCI device frontend driver allows the kernel to import arbitrary
+         PCI devices from a PCI backend to support PCI driver domains.
++config PCI_DISABLE_COMMON_QUIRKS
++      bool "PCI disable common quirks"
++      depends on PCI
++      help
++        If you don't know what to do here, say N.
++
++
+ config PCI_ATS
+       bool
+--- a/drivers/pci/quirks.c
++++ b/drivers/pci/quirks.c
+@@ -206,6 +206,7 @@ static void quirk_mmio_always_on(struct
+ DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_ANY_ID, PCI_ANY_ID,
+                               PCI_CLASS_BRIDGE_HOST, 8, quirk_mmio_always_on);
++#ifndef CONFIG_PCI_DISABLE_COMMON_QUIRKS
+ /*
+  * The Mellanox Tavor device gives false positive parity errors.  Mark this
+  * device with a broken_parity_status to allow PCI scanning code to "skip"
+@@ -3323,6 +3324,8 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_I
+ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65f9, quirk_intel_mc_errata);
+ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65fa, quirk_intel_mc_errata);
++#endif /* !CONFIG_PCI_DISABLE_COMMON_QUIRKS */
++
+ /*
+  * Ivytown NTB BAR sizes are misreported by the hardware due to an erratum.
+  * To work around this, query the size it should be configured to by the
+@@ -3348,6 +3351,8 @@ static void quirk_intel_ntb(struct pci_d
+ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x0e08, quirk_intel_ntb);
+ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x0e0d, quirk_intel_ntb);
++#ifndef CONFIG_PCI_DISABLE_COMMON_QUIRKS
++
+ /*
+  * Some BIOS implementations leave the Intel GPU interrupts enabled, even
+  * though no one is handling them (e.g., if the i915 driver is never
+@@ -3386,6 +3391,8 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_IN
+ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x010a, disable_igfx_irq);
+ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0152, disable_igfx_irq);
++#endif /* !CONFIG_PCI_DISABLE_COMMON_QUIRKS */
++
+ /*
+  * PCI devices which are on Intel chips can skip the 10ms delay
+  * before entering D3 mode.