ipq40xx: add Edgecore OAP-100 support

[openwrt/openwrt.git] / target / linux / ipq40xx / base-files / etc / board.d / 02_network

diff --git a/target/linux/ipq40xx/base-files/etc/board.d/02_network b/target/linux/ipq40xx/base-files/etc/board.d/02_network
index 44cb9f9d126c763620276087a4db67a925fdbadd..5c1bdc51ceef69428a33e634f5bd659bbd9afbc8 100755 (executable)
--- a/target/linux/ipq40xx/base-files/etc/board.d/02_network
+++ b/target/linux/ipq40xx/base-files/etc/board.d/02_network
@@ -15,9 +15,22 @@ ipq40xx_setup_interfaces()
        8dev,habanero-dvk|\
        8dev,jalapeno|\
        alfa-network,ap120c-ac|\
+       engenius,emr3500|\
        engenius,ens620ext)
                ucidef_set_interfaces_lan_wan "eth0" "eth1"
                ;;
+       aruba,ap-303|\
+       aruba,ap-365|\
+       avm,fritzrepeater-1200|\
+       dlink,dap-2610 |\
+       engenius,eap1300|\
+       engenius,emd1|\
+       meraki,mr33|\
+       netgear,ex6100v2|\
+       netgear,ex6150v2|\
+       zyxel,wre6606)
+               ucidef_set_interface_lan "eth0"
+               ;;
        aruba,ap-303h)
                ucidef_set_interfaces_lan_wan "eth0" "eth1"
                ucidef_add_switch "switch0" \
@@ -25,6 +38,8 @@ ipq40xx_setup_interfaces()
                ;;
        asus,map-ac2200|\
        cilab,meshpoint-one|\
+       edgecore,ecw5211|\
+       edgecore,oap100|\
        openmesh,a42|\
        openmesh,a62)
                ucidef_set_interfaces_lan_wan "eth1" "eth0"
@@ -46,33 +61,38 @@ ipq40xx_setup_interfaces()
                ucidef_add_switch "switch0" \
                        "0u@eth0" "1:lan" "2:lan" "3:lan" "4:lan"
                ;;
-       aruba,ap-303|\
-       avm,fritzrepeater-1200|\
-       dlink,dap-2610 |\
-       engenius,eap1300|\
-       engenius,emd1|\
-       meraki,mr33|\
-       netgear,ex6100v2|\
-       netgear,ex6150v2|\
-       zyxel,wre6606)
-               ucidef_set_interface_lan "eth0"
-               ;;
        avm,fritzrepeater-3000|\
        compex,wpj419|\
        compex,wpj428|\
        engenius,eap2200)
                ucidef_set_interface_lan "eth0 eth1"
                ;;
+       buffalo,wtr-m2133hp)
+               ucidef_set_interfaces_lan_wan "eth0" "eth1"
+               ucidef_add_switch "switch0" \
+                       "0u@eth0" "2:lan:3" "3:lan:2" "4:lan:1"
+               ;;
+       cellc,rtl30vw)
+               ucidef_set_interface_lan "eth0"
+               ucidef_add_switch "switch0" \
+                       "0u@eth0" "3:lan" "4:lan"
+               ;;
        ezviz,cs-w3-wd1200g-eup)
                ucidef_set_interfaces_lan_wan "eth0" "eth1"
                ucidef_add_switch "switch0" \
                        "0u@eth0" "2:lan:3" "3:lan:2" "4:lan:1" "0u@eth1" "5:wan"
                ;;
-       glinet,gl-b1300)
+       glinet,gl-b1300 |\
+       glinet,gl-s1300)
                ucidef_set_interfaces_lan_wan "eth0" "eth1"
                ucidef_add_switch "switch0" \
                        "0u@eth0" "3:lan" "4:lan"
                ;;
+       mobipromo,cm520-79f)
+               ucidef_add_switch "switch0" \
+                       "0u@eth0" "3:lan:2" "4:lan:1"
+               ucidef_set_interface_wan "eth1"
+               ;;
        qxwlan,e2600ac-c1 |\
        qxwlan,e2600ac-c2)
                ucidef_set_interfaces_lan_wan "eth0" "eth1"
@@ -119,6 +139,11 @@ ipq40xx_setup_macs()
                lan_mac=$(mtd_get_mac_ascii 0:APPSBLENV ethaddr)
                label_mac=$lan_mac
                ;;
+       engenius,emr3500)
+               wan_mac=$(mtd_get_mac_ascii 0:APPSBLENV wanaddr)
+               lan_mac=$(mtd_get_mac_ascii 0:APPSBLENV ethaddr)
+               label_mac=$wan_mac
+               ;;
        engenius,ens620ext)
                wan_mac=$(mtd_get_mac_ascii u-boot-env ethaddr)
                lan_mac=$(macaddr_add "$wan_mac" 1)