ipq40xx: add support for P&W R619AC (aka G-DOCK 2.0)

[openwrt/openwrt.git] / target / linux / ipq40xx / base-files / etc / board.d / 02_network

diff --git a/target/linux/ipq40xx/base-files/etc/board.d/02_network b/target/linux/ipq40xx/base-files/etc/board.d/02_network
index 31f99faca2d48d7b4148b5a8be19aad797be042c..5d123109a2f88c9049a239e364a767c4f475aac8 100644 (file)
--- a/target/linux/ipq40xx/base-files/etc/board.d/02_network
+++ b/target/linux/ipq40xx/base-files/etc/board.d/02_network
@@ -17,6 +17,7 @@ ipq40xx_setup_interfaces()
        engenius,emr3500|\
        engenius,ens620ext|\
        luma,wrtq-329acn|\
+       netgear,wac510|\
        plasmacloud,pa1200|\
        plasmacloud,pa2200)
                ucidef_set_interfaces_lan_wan "eth0" "eth1"
@@ -28,6 +29,7 @@ ipq40xx_setup_interfaces()
        engenius,eap1300|\
        engenius,emd1|\
        meraki,mr33|\
+       mikrotik,sxtsq-5-ac|\
        netgear,ex6100v2|\
        netgear,ex6150v2|\
        zyxel,wre6606)
@@ -47,6 +49,9 @@ ipq40xx_setup_interfaces()
                ucidef_set_interfaces_lan_wan "eth1" "eth0"
                ;;
        asus,rt-ac58u|\
+       mikrotik,hap-ac2|\
+       p2w,r619ac-64m|\
+       p2w,r619ac-128m|\
        zyxel,nbg6617)
                ucidef_set_interfaces_lan_wan "eth0" "eth1"
                ucidef_add_switch "switch0" \
@@ -62,7 +67,7 @@ ipq40xx_setup_interfaces()
                ;;
        avm,fritzbox-7530)
                ucidef_add_switch "switch0" \
-                       "0u@eth0" "1:lan" "2:lan" "3:lan" "4:lan"
+                       "0u@eth0" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1"
                ;;
        avm,fritzrepeater-3000)
                ucidef_add_switch "switch0" \
@@ -103,6 +108,14 @@ ipq40xx_setup_interfaces()
                        "0u@eth0" "3:lan:2" "4:lan:1"
                ucidef_set_interface_wan "eth1"
                ;;
+       netgear,rbr50|\
+       netgear,rbs50|\
+       netgear,srr60|\
+       netgear,srs60)
+               ucidef_add_switch "switch0" \
+                       "0u@eth0" "2:lan" "3:lan" "4:lan"
+               ucidef_set_interface_wan "eth1"
+               ;;
        qxwlan,e2600ac-c1 |\
        qxwlan,e2600ac-c2)
                ucidef_set_interfaces_lan_wan "eth0" "eth1"
@@ -169,6 +182,15 @@ ipq40xx_setup_macs()
                wan_mac=$(mtd_get_mac_ascii devinfo hw_mac_addr)
                lan_mac=$(macaddr_add "$wan_mac" 1)
                ;;
+       mikrotik,hap-ac2)
+               wan_mac=$(cat /sys/firmware/mikrotik/hard_config/mac_base)
+               lan_mac=$(macaddr_add $wan_mac 1)
+               label_mac="$wan_mac"
+               ;;
+       mikrotik,sxtsq-5-ac)
+               lan_mac=$(cat /sys/firmware/mikrotik/hard_config/mac_base)
+               label_mac="$lan_mac"
+               ;;
        esac
 
        [ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" $lan_mac