ipq40xx: add support for Netgear RBX40

[openwrt/openwrt.git] / target / linux / ipq40xx / base-files / etc / board.d / 02_network

diff --git a/target/linux/ipq40xx/base-files/etc/board.d/02_network b/target/linux/ipq40xx/base-files/etc/board.d/02_network
index 163dcdcbc6811890e3b5e5076e0e5a24d619f9f0..614afa8590dace0974077c44b710c61317a434b1 100644 (file)
--- a/target/linux/ipq40xx/base-files/etc/board.d/02_network
+++ b/target/linux/ipq40xx/base-files/etc/board.d/02_network
@@ -13,15 +13,18 @@ ipq40xx_setup_interfaces()
        case "$board" in
        8dev,habanero-dvk|\
        avm,fritzbox-4040|\
+       asus,rt-ac42u|\
        asus,rt-ac58u|\
        linksys,ea6350v3|\
        linksys,ea8300|\
        linksys,mr8300|\
        mikrotik,hap-ac2|\
        mikrotik,hap-ac3|\
+       mikrotik,hap-ac3-lte6-kit|\
        p2w,r619ac-64m|\
        p2w,r619ac-128m|\
        pakedge,wr-1|\
+       teltonika,rutx50|\
        zyxel,nbg6617)
                ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "wan"
                ;;
@@ -30,39 +33,90 @@ ipq40xx_setup_interfaces()
        asus,map-ac2200|\
        cilab,meshpoint-one|\
        edgecore,ecw5211|\
+       glinet,gl-ap1300|\
        glinet,gl-b2200|\
+       google,wifi|\
+       linksys,whw03v2|\
        luma,wrtq-329acn|\
        mikrotik,cap-ac|\
-       netgear,wac510)
+       netgear,wac510|\
+       sony,ncp-hg100-cellular|\
+       wallys,dr40x9|\
+       zte,mf18a|\
+       zte,mf289f)
                ucidef_set_interfaces_lan_wan "lan" "wan"
                ;;
        aruba,ap-303|\
+       aruba,ap-365|\
        avm,fritzrepeater-1200|\
+       dlink,dap-2610|\
+       extreme-networks,ws-ap3915i|\
        meraki,mr33|\
        meraki,mr74|\
        mikrotik,lhgg-60ad|\
-       mikrotik,sxtsq-5-ac)
+       mikrotik,sxtsq-5-ac|\
+       netgear,ex6100v2|\
+       netgear,ex6150v2)
                ucidef_set_interface_lan "lan"
                ;;
        avm,fritzbox-7530)
                ucidef_set_interface_lan "lan1 lan2 lan3 lan4"
                ;;
+       avm,fritzrepeater-3000|\
        cellc,rtl30vw)
                ucidef_set_interface_lan "lan1 lan2"
                ;;
-       glinet,gl-b1300)
-               ucidef_set_interfaces_lan_wan "lan1 lan2" "wan"
-               ;;
        compex,wpj428)
                ucidef_set_interface_lan "lan1 lan2"
                ;;
+       devolo,magic-2-wifi-next)
+               ucidef_set_interface_lan "lan1 lan2 ghn"
+               ;;
+       linksys,whw01)
+               ucidef_set_interface_lan "eth1 eth2"
+               ;;
+       glinet,gl-a1300|\
+       glinet,gl-b1300|\
+       mobipromo,cm520-79f)
+               ucidef_set_interfaces_lan_wan "lan1 lan2" "wan"
+               ;;
+       mikrotik,wap-ac|\
+       mikrotik,wap-ac-lte|\
+       mikrotik,wap-r-ac)
+               ucidef_set_interface_lan "sw-eth1 sw-eth2"
+               ;;
+       aruba,ap-303h|\
+       buffalo,wtr-m2133hp|\
+       ezviz,cs-w3-wd1200g-eup|\
+       netgear,rbr40|\
+       netgear,rbs40|\
+       netgear,rbr50|\
+       netgear,rbs50|\
+       netgear,srr60|\
+       netgear,srs60)
+               ucidef_set_interfaces_lan_wan "lan1 lan2 lan3" "wan"
+               ;;
+       openmesh,a42|\
+       openmesh,a62)
+               ucidef_set_interfaces_lan_wan "ethernet2" "ethernet1"
+               ;;
+       plasmacloud,pa1200|\
+       plasmacloud,pa2200)
+               ucidef_set_interfaces_lan_wan "ethernet1" "ethernet2"
+               ;;
+       qxwlan,e2600ac-c1)
+               ucidef_set_interfaces_lan_wan "sw-eth1" "sw-eth2"
+               ;;
+       qxwlan,e2600ac-c2)
+               ucidef_set_interfaces_lan_wan "sw-eth1 sw-eth2" "sw-eth3"
+               ;;
        zte,mf286d)
                ucidef_set_interfaces_lan_wan "lan2 lan3 lan4" "wan"
                ;;
-       zte,mf289f)
-               ucidef_set_interfaces_lan_wan "eth0" "eth1"
-               ucidef_add_switch "switch0" \
-                       "0u@eth0" "0u@eth1" "2:lan:1" "5:lan:2"
+       zte,mf287plus|\
+       zte,mf287pro)
+               ucidef_set_interface_lan "lan1 lan2 lan3 lan4"
+               ucidef_set_interface "wan" device "/dev/cdc-wdm0" protocol "qmi"
                ;;
        *)
                echo "Unsupported hardware. Network interfaces not initialized"
@@ -70,6 +124,26 @@ ipq40xx_setup_interfaces()
        esac
 }
 
+ipq40xx_setup_dsl()
+{
+       local board="$1"
+       local annex="j"
+       local tone="b"
+       local xfer_mode=""
+
+       case "$board" in
+       avm,fritzbox-7530)
+               ;;
+       *)
+               return 0
+               ;;
+       esac
+
+       ucidef_add_atm_bridge "1" "32" "llc" "bridged" "dsl"
+       ucidef_add_vdsl_modem "$annex" "$tone" "$xfer_mode"
+       ucidef_set_interface_wan "dsl0" "pppoe"
+}
+
 ipq40xx_setup_macs()
 {
        local board="$1"
@@ -81,11 +155,18 @@ ipq40xx_setup_macs()
        8dev,habanero-dvk)
                label_mac=$(mtd_get_mac_binary "ART" 0x1006)
                ;;
+       asus,rt-ac42u)
+               label_mac=$(mtd_get_mac_binary_ubi Factory 0x1006)
+               ;;
        asus,rt-ac58u)
                wan_mac=$(mtd_get_mac_binary_ubi Factory 0x1006)
                lan_mac=$(mtd_get_mac_binary_ubi Factory 0x5006)
                label_mac=$wan_mac
                ;;
+       avm,fritzbox-7530)
+               local tffsdev=$(find_mtd_chardev "nand-tffs")
+               wan_mac=$(/usr/bin/fritz_tffs_nand -b -d $tffsdev -n macdsl)
+               ;;
        cilab,meshpoint-one)
                label_mac=$(mtd_get_mac_binary "ART" 0x1006)
                ;;
@@ -114,6 +195,10 @@ ipq40xx_setup_macs()
        ezviz,cs-w3-wd1200g-eup)
                label_mac=$(mtd_get_mac_binary "ART" 0x6)
                ;;
+       google,wifi)
+               wan_mac=$(get_mac_label)
+               lan_mac=$(macaddr_add "$wan_mac" 1)
+               ;;
        linksys,ea6350v3|\
        linksys,ea8300  |\
        linksys,mr8300)
@@ -122,7 +207,8 @@ ipq40xx_setup_macs()
                ;;
        mikrotik,cap-ac |\
        mikrotik,hap-ac2|\
-       mikrotik,hap-ac3)
+       mikrotik,hap-ac3|\
+       mikrotik,hap-ac3-lte6-kit)
                wan_mac=$(cat /sys/firmware/mikrotik/hard_config/mac_base)
                lan_mac=$(macaddr_add $wan_mac 1)
                label_mac="$wan_mac"
@@ -132,6 +218,10 @@ ipq40xx_setup_macs()
                lan_mac=$(cat /sys/firmware/mikrotik/hard_config/mac_base)
                label_mac="$lan_mac"
                ;;
+       netgear,rbr50|\
+       netgear,rbs50|\
+       netgear,srr60|\
+       netgear,srs60|\
        pakedge,wr-1)
                wan_mac=$(macaddr_add $(get_mac_label) 1)
                ;;
@@ -145,6 +235,7 @@ ipq40xx_setup_macs()
 board_config_update
 board=$(board_name)
 ipq40xx_setup_interfaces $board
+ipq40xx_setup_dsl $board
 ipq40xx_setup_macs $board
 board_config_flush