ipq40xx: add support for Netgear RBX40

[openwrt/openwrt.git] / target / linux / ipq40xx / base-files / etc / board.d / 02_network

diff --git a/target/linux/ipq40xx/base-files/etc/board.d/02_network b/target/linux/ipq40xx/base-files/etc/board.d/02_network
index 7c9c2f0827829f146f6fa25f6d7a757808c0a357..614afa8590dace0974077c44b710c61317a434b1 100644 (file)
--- a/target/linux/ipq40xx/base-files/etc/board.d/02_network
+++ b/target/linux/ipq40xx/base-files/etc/board.d/02_network
@@ -24,6 +24,7 @@ ipq40xx_setup_interfaces()
        p2w,r619ac-64m|\
        p2w,r619ac-128m|\
        pakedge,wr-1|\
+       teltonika,rutx50|\
        zyxel,nbg6617)
                ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "wan"
                ;;
@@ -32,6 +33,7 @@ ipq40xx_setup_interfaces()
        asus,map-ac2200|\
        cilab,meshpoint-one|\
        edgecore,ecw5211|\
+       glinet,gl-ap1300|\
        glinet,gl-b2200|\
        google,wifi|\
        linksys,whw03v2|\
@@ -60,12 +62,16 @@ ipq40xx_setup_interfaces()
        avm,fritzbox-7530)
                ucidef_set_interface_lan "lan1 lan2 lan3 lan4"
                ;;
+       avm,fritzrepeater-3000|\
        cellc,rtl30vw)
                ucidef_set_interface_lan "lan1 lan2"
                ;;
        compex,wpj428)
                ucidef_set_interface_lan "lan1 lan2"
                ;;
+       devolo,magic-2-wifi-next)
+               ucidef_set_interface_lan "lan1 lan2 ghn"
+               ;;
        linksys,whw01)
                ucidef_set_interface_lan "eth1 eth2"
                ;;
@@ -80,6 +86,10 @@ ipq40xx_setup_interfaces()
                ucidef_set_interface_lan "sw-eth1 sw-eth2"
                ;;
        aruba,ap-303h|\
+       buffalo,wtr-m2133hp|\
+       ezviz,cs-w3-wd1200g-eup|\
+       netgear,rbr40|\
+       netgear,rbs40|\
        netgear,rbr50|\
        netgear,rbs50|\
        netgear,srr60|\
@@ -94,9 +104,20 @@ ipq40xx_setup_interfaces()
        plasmacloud,pa2200)
                ucidef_set_interfaces_lan_wan "ethernet1" "ethernet2"
                ;;
+       qxwlan,e2600ac-c1)
+               ucidef_set_interfaces_lan_wan "sw-eth1" "sw-eth2"
+               ;;
+       qxwlan,e2600ac-c2)
+               ucidef_set_interfaces_lan_wan "sw-eth1 sw-eth2" "sw-eth3"
+               ;;
        zte,mf286d)
                ucidef_set_interfaces_lan_wan "lan2 lan3 lan4" "wan"
                ;;
+       zte,mf287plus|\
+       zte,mf287pro)
+               ucidef_set_interface_lan "lan1 lan2 lan3 lan4"
+               ucidef_set_interface "wan" device "/dev/cdc-wdm0" protocol "qmi"
+               ;;
        *)
                echo "Unsupported hardware. Network interfaces not initialized"
                ;;