ipq40xx: utilize nvmem-cells for openmesh,a62

[openwrt/openwrt.git] / target / linux / ipq40xx / base-files / etc / board.d / 02_network

diff --git a/target/linux/ipq40xx/base-files/etc/board.d/02_network b/target/linux/ipq40xx/base-files/etc/board.d/02_network
index 163dcdcbc6811890e3b5e5076e0e5a24d619f9f0..e682a0fb15700362e6972749e67d3287d12fbfd6 100644 (file)
--- a/target/linux/ipq40xx/base-files/etc/board.d/02_network
+++ b/target/linux/ipq40xx/base-files/etc/board.d/02_network
@@ -13,12 +13,14 @@ ipq40xx_setup_interfaces()
        case "$board" in
        8dev,habanero-dvk|\
        avm,fritzbox-4040|\
+       asus,rt-ac42u|\
        asus,rt-ac58u|\
        linksys,ea6350v3|\
        linksys,ea8300|\
        linksys,mr8300|\
        mikrotik,hap-ac2|\
        mikrotik,hap-ac3|\
+       mikrotik,hap-ac3-lte6-kit|\
        p2w,r619ac-64m|\
        p2w,r619ac-128m|\
        pakedge,wr-1|\
@@ -31,13 +33,17 @@ ipq40xx_setup_interfaces()
        cilab,meshpoint-one|\
        edgecore,ecw5211|\
        glinet,gl-b2200|\
+       google,wifi|\
        luma,wrtq-329acn|\
        mikrotik,cap-ac|\
-       netgear,wac510)
+       netgear,wac510|\
+       sony,ncp-hg100-cellular|\
+       zte,mf289f)
                ucidef_set_interfaces_lan_wan "lan" "wan"
                ;;
        aruba,ap-303|\
        avm,fritzrepeater-1200|\
+       dlink,dap-2610|\
        meraki,mr33|\
        meraki,mr74|\
        mikrotik,lhgg-60ad|\
@@ -50,20 +56,30 @@ ipq40xx_setup_interfaces()
        cellc,rtl30vw)
                ucidef_set_interface_lan "lan1 lan2"
                ;;
-       glinet,gl-b1300)
-               ucidef_set_interfaces_lan_wan "lan1 lan2" "wan"
-               ;;
        compex,wpj428)
                ucidef_set_interface_lan "lan1 lan2"
                ;;
+       glinet,gl-a1300|\
+       glinet,gl-b1300|\
+       mobipromo,cm520-79f)
+               ucidef_set_interfaces_lan_wan "lan1 lan2" "wan"
+               ;;
+       mikrotik,wap-ac)
+               ucidef_set_interface_lan "sw-eth1 sw-eth2"
+               ;;
+       netgear,rbr50|\
+       netgear,rbs50|\
+       netgear,srr60|\
+       netgear,srs60)
+               ucidef_set_interfaces_lan_wan "lan1 lan2 lan3" "wan"
+               ;;
+       openmesh,a42|\
+       openmesh,a62)
+               ucidef_set_interfaces_lan_wan "ethernet2" "ethernet1"
+               ;;
        zte,mf286d)
                ucidef_set_interfaces_lan_wan "lan2 lan3 lan4" "wan"
                ;;
-       zte,mf289f)
-               ucidef_set_interfaces_lan_wan "eth0" "eth1"
-               ucidef_add_switch "switch0" \
-                       "0u@eth0" "0u@eth1" "2:lan:1" "5:lan:2"
-               ;;
        *)
                echo "Unsupported hardware. Network interfaces not initialized"
                ;;
@@ -81,6 +97,9 @@ ipq40xx_setup_macs()
        8dev,habanero-dvk)
                label_mac=$(mtd_get_mac_binary "ART" 0x1006)
                ;;
+       asus,rt-ac42u)
+               label_mac=$(mtd_get_mac_binary_ubi Factory 0x1006)
+               ;;
        asus,rt-ac58u)
                wan_mac=$(mtd_get_mac_binary_ubi Factory 0x1006)
                lan_mac=$(mtd_get_mac_binary_ubi Factory 0x5006)
@@ -114,6 +133,10 @@ ipq40xx_setup_macs()
        ezviz,cs-w3-wd1200g-eup)
                label_mac=$(mtd_get_mac_binary "ART" 0x6)
                ;;
+       google,wifi)
+               wan_mac=$(get_mac_label)
+               lan_mac=$(macaddr_add "$wan_mac" 1)
+               ;;
        linksys,ea6350v3|\
        linksys,ea8300  |\
        linksys,mr8300)
@@ -122,7 +145,8 @@ ipq40xx_setup_macs()
                ;;
        mikrotik,cap-ac |\
        mikrotik,hap-ac2|\
-       mikrotik,hap-ac3)
+       mikrotik,hap-ac3|\
+       mikrotik,hap-ac3-lte6-kit)
                wan_mac=$(cat /sys/firmware/mikrotik/hard_config/mac_base)
                lan_mac=$(macaddr_add $wan_mac 1)
                label_mac="$wan_mac"
@@ -132,6 +156,10 @@ ipq40xx_setup_macs()
                lan_mac=$(cat /sys/firmware/mikrotik/hard_config/mac_base)
                label_mac="$lan_mac"
                ;;
+       netgear,rbr50|\
+       netgear,rbs50|\
+       netgear,srr60|\
+       netgear,srs60|\
        pakedge,wr-1)
                wan_mac=$(macaddr_add $(get_mac_label) 1)
                ;;