ipq40xx: utilize nvmem-cells for openmesh,a62

[openwrt/openwrt.git] / target / linux / ipq40xx / base-files / etc / board.d / 02_network

diff --git a/target/linux/ipq40xx/base-files/etc/board.d/02_network b/target/linux/ipq40xx/base-files/etc/board.d/02_network
index f3dfd656c3ab6602e0502455b9e32eb54386184f..e682a0fb15700362e6972749e67d3287d12fbfd6 100644 (file)
--- a/target/linux/ipq40xx/base-files/etc/board.d/02_network
+++ b/target/linux/ipq40xx/base-files/etc/board.d/02_network
@@ -12,144 +12,73 @@ ipq40xx_setup_interfaces()
 
        case "$board" in
        8dev,habanero-dvk|\
-       8dev,jalapeno|\
-       alfa-network,ap120c-ac|\
-       engenius,emr3500|\
-       engenius,ens620ext|\
-       luma,wrtq-329acn|\
-       netgear,wac510|\
-       plasmacloud,pa1200|\
-       plasmacloud,pa2200)
-               ucidef_set_interfaces_lan_wan "eth0" "eth1"
-               ;;
-       aruba,ap-303|\
-       aruba,ap-365|\
-       avm,fritzrepeater-1200|\
-       dlink,dap-2610 |\
-       engenius,eap1300|\
-       engenius,emd1|\
-       meraki,mr33|\
-       mikrotik,lhgg-60ad|\
-       mikrotik,sxtsq-5-ac|\
-       netgear,ex6100v2|\
-       netgear,ex6150v2|\
-       zyxel,wre6606)
-               ucidef_set_interface_lan "eth0"
-               ;;
-       aruba,ap-303h|\
-       teltonika,rutx10)
-               ucidef_set_interfaces_lan_wan "eth0" "eth1"
-               ucidef_add_switch "switch0" \
-                       "0u@eth0" "2:lan:1" "3:lan:2" "4:lan:3" "0u@eth1" "5:wan"
-               ;;
-       asus,map-ac2200|\
-       cilab,meshpoint-one|\
-       edgecore,ecw5211|\
-       edgecore,oap100|\
-       google,wifi|\
-       openmesh,a42|\
-       openmesh,a62)
-               ucidef_set_interfaces_lan_wan "eth1" "eth0"
-               ;;
-       mikrotik,cap-ac)
-               ucidef_add_switch "switch0" \
-                       "0t@eth0" "4:lan" "5:wan"
-               ;;
+       avm,fritzbox-4040|\
        asus,rt-ac42u|\
        asus,rt-ac58u|\
+       linksys,ea6350v3|\
+       linksys,ea8300|\
+       linksys,mr8300|\
        mikrotik,hap-ac2|\
        mikrotik,hap-ac3|\
+       mikrotik,hap-ac3-lte6-kit|\
        p2w,r619ac-64m|\
        p2w,r619ac-128m|\
+       pakedge,wr-1|\
        zyxel,nbg6617)
-               ucidef_set_interfaces_lan_wan "eth0" "eth1"
-               ucidef_add_switch "switch0" \
-                       "0u@eth0" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1"
+               ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "wan"
                ;;
-       avm,fritzbox-4040|\
-       linksys,ea6350v3|\
-       linksys,ea8300)
-               ucidef_set_interfaces_lan_wan "eth0" "eth1"
-               ucidef_add_switch "switch0" \
-                       "0u@eth0" "1:lan" "2:lan" "3:lan" "4:lan"
+       8dev,jalapeno|\
+       alfa-network,ap120c-ac|\
+       asus,map-ac2200|\
+       cilab,meshpoint-one|\
+       edgecore,ecw5211|\
+       glinet,gl-b2200|\
+       google,wifi|\
+       luma,wrtq-329acn|\
+       mikrotik,cap-ac|\
+       netgear,wac510|\
+       sony,ncp-hg100-cellular|\
+       zte,mf289f)
+               ucidef_set_interfaces_lan_wan "lan" "wan"
                ;;
-       linksys,mr8300)
-               ucidef_set_interfaces_lan_wan "eth0" "eth1"
-               ucidef_add_switch "switch0" \
-                       "0u@eth0" "1:lan" "2:lan" "3:lan" "4:lan" "0u@eth1" "5:wan"
+       aruba,ap-303|\
+       avm,fritzrepeater-1200|\
+       dlink,dap-2610|\
+       meraki,mr33|\
+       meraki,mr74|\
+       mikrotik,lhgg-60ad|\
+       mikrotik,sxtsq-5-ac)
+               ucidef_set_interface_lan "lan"
                ;;
        avm,fritzbox-7530)
-               ucidef_add_switch "switch0" \
-                       "0u@eth0" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1"
-               ;;
-       avm,fritzrepeater-3000)
-               ucidef_add_switch "switch0" \
-                       "0u@eth0" "4:lan:1" "5:lan:2"
-               ;;
-       compex,wpj419|\
-       compex,wpj428|\
-       engenius,eap2200)
-               ucidef_set_interface_lan "eth0 eth1"
-               ;;
-       buffalo,wtr-m2133hp)
-               ucidef_set_interfaces_lan_wan "eth0" "eth1"
-               ucidef_add_switch "switch0" \
-                       "0u@eth0" "2:lan:3" "3:lan:2" "4:lan:1"
+               ucidef_set_interface_lan "lan1 lan2 lan3 lan4"
                ;;
        cellc,rtl30vw)
-               ucidef_set_interface_lan "eth0"
-               ucidef_add_switch "switch0" \
-                       "0u@eth0" "3:lan" "4:lan"
+               ucidef_set_interface_lan "lan1 lan2"
                ;;
-       devolo,magic-2-wifi-next)
-               ucidef_set_interface_lan "eth0 eth1 eth2"
-               ;;
-       ezviz,cs-w3-wd1200g-eup)
-               ucidef_set_interfaces_lan_wan "eth0" "eth1"
-               ucidef_add_switch "switch0" \
-                       "0u@eth0" "2:lan:3" "3:lan:2" "4:lan:1" "0u@eth1" "5:wan"
-               ;;
-       glinet,gl-ap1300 |\
-       glinet,gl-b1300 |\
-       glinet,gl-s1300)
-               ucidef_set_interfaces_lan_wan "eth0" "eth1"
-               ucidef_add_switch "switch0" \
-                       "0u@eth0" "3:lan" "4:lan"
-               ;;
-       glinet,gl-b2200)
-               ucidef_set_interfaces_lan_wan "eth0" "eth1"
-               ucidef_add_switch "switch0" \
-                       "0u@eth0" "1:lan" "2:lan" "3:lan" "5:lan" "0u@eth1" "4:wan"
+       compex,wpj428)
+               ucidef_set_interface_lan "lan1 lan2"
                ;;
+       glinet,gl-a1300|\
+       glinet,gl-b1300|\
        mobipromo,cm520-79f)
-               ucidef_add_switch "switch0" \
-                       "0u@eth0" "3:lan:2" "4:lan:1"
-               ucidef_set_interface_wan "eth1"
+               ucidef_set_interfaces_lan_wan "lan1 lan2" "wan"
+               ;;
+       mikrotik,wap-ac)
+               ucidef_set_interface_lan "sw-eth1 sw-eth2"
                ;;
        netgear,rbr50|\
        netgear,rbs50|\
        netgear,srr60|\
        netgear,srs60)
-               ucidef_add_switch "switch0" \
-                       "0u@eth0" "2:lan" "3:lan" "4:lan"
-               ucidef_set_interface_wan "eth1"
-               ;;
-       qxwlan,e2600ac-c1 |\
-       qxwlan,e2600ac-c2)
-               ucidef_set_interfaces_lan_wan "eth0" "eth1"
-               ucidef_add_switch "switch0" \
-                       "0u@eth0" "3:lan" "4:lan" "0u@eth1" "5:wan"
-               ;;
-       unielec,u4019-32m |\
-       tel,x1pro)
-               ucidef_set_interfaces_lan_wan "eth0" "eth1"
-               ucidef_add_switch "switch0" \
-                       "0u@eth0" "1:lan" "2:lan" "3:lan" "4:lan" "0u@eth1" "5:wan"
+               ucidef_set_interfaces_lan_wan "lan1 lan2 lan3" "wan"
+               ;;
+       openmesh,a42|\
+       openmesh,a62)
+               ucidef_set_interfaces_lan_wan "ethernet2" "ethernet1"
                ;;
        zte,mf286d)
-               ucidef_set_interfaces_lan_wan "eth0" "eth1"
-               ucidef_add_switch "switch0" \
-                       "0u@eth0" "2:lan:4" "3:lan:3" "4:lan:2" "0u@eth1" "5:wan"
+               ucidef_set_interfaces_lan_wan "lan2 lan3 lan4" "wan"
                ;;
        *)
                echo "Unsupported hardware. Network interfaces not initialized"
@@ -168,6 +97,9 @@ ipq40xx_setup_macs()
        8dev,habanero-dvk)
                label_mac=$(mtd_get_mac_binary "ART" 0x1006)
                ;;
+       asus,rt-ac42u)
+               label_mac=$(mtd_get_mac_binary_ubi Factory 0x1006)
+               ;;
        asus,rt-ac58u)
                wan_mac=$(mtd_get_mac_binary_ubi Factory 0x1006)
                lan_mac=$(mtd_get_mac_binary_ubi Factory 0x5006)
@@ -201,13 +133,20 @@ ipq40xx_setup_macs()
        ezviz,cs-w3-wd1200g-eup)
                label_mac=$(mtd_get_mac_binary "ART" 0x6)
                ;;
-       linksys,ea6350v3)
+       google,wifi)
+               wan_mac=$(get_mac_label)
+               lan_mac=$(macaddr_add "$wan_mac" 1)
+               ;;
+       linksys,ea6350v3|\
+       linksys,ea8300  |\
+       linksys,mr8300)
                wan_mac=$(mtd_get_mac_ascii devinfo hw_mac_addr)
                lan_mac=$(macaddr_add "$wan_mac" 1)
                ;;
        mikrotik,cap-ac |\
        mikrotik,hap-ac2|\
-       mikrotik,hap-ac3)
+       mikrotik,hap-ac3|\
+       mikrotik,hap-ac3-lte6-kit)
                wan_mac=$(cat /sys/firmware/mikrotik/hard_config/mac_base)
                lan_mac=$(macaddr_add $wan_mac 1)
                label_mac="$wan_mac"
@@ -217,6 +156,13 @@ ipq40xx_setup_macs()
                lan_mac=$(cat /sys/firmware/mikrotik/hard_config/mac_base)
                label_mac="$lan_mac"
                ;;
+       netgear,rbr50|\
+       netgear,rbs50|\
+       netgear,srr60|\
+       netgear,srs60|\
+       pakedge,wr-1)
+               wan_mac=$(macaddr_add $(get_mac_label) 1)
+               ;;
        esac
 
        [ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" $lan_mac