projects / openwrt / openwrt.git / blobdiff
? search:
summary | shortlog | log | commit | commitdiff | tree
raw | inline | side by side
ipq40xx: use NVMEM-on-UBI for ASUS RT-AC58U
[openwrt/openwrt.git] / target / linux / ipq40xx / base-files / etc / hotplug.d / firmware / 11-ath10k-caldata
diff --git a/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index 35862ce3bcf24361fc1f5fd50f2508a49aac4d04..4a1a0ff31118a3485c1930865c011bac871dfa74 100644 (file)
--- a/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -9,10 +9,10 @@ board=$(board_name)
 case "$FIRMWARE" in
 "ath10k/cal-pci-0000:01:00.0.bin")
        case "$board" in
-       meraki,mr33)
+       meraki,mr33 |\
+       meraki,mr74)
                caldata_extract_ubi "ART" 0x9000 0x844
                caldata_valid "4408" || caldata_extract "ART" 0x9000 0x844
-               ath10k_patch_mac $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 0x66) 1)
                ;;
        esac
        ;;
@@ -23,6 +23,9 @@ case "$FIRMWARE" in
                ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
                        /lib/firmware/ath10k/QCA9888/hw2.0/board.bin
                ;;
+       asus,rt-ac42u)
+               caldata_extract_ubi "Factory" 0x9000 0x2f20
+               ;;
        avm,fritzrepeater-3000)
                /usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
                /usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
@@ -31,21 +34,18 @@ case "$FIRMWARE" in
                /usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \
                /usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1")
                ;;
-       buffalo,wtr-m2133hp)
-               caldata_extract "ART" 0x9000 0x2f20
-               ath10k_patch_mac $(mtd_get_mac_binary ORGDATA 0x32)
-               ;;
-       engenius,eap2200 |\
-       openmesh,a62 |\
-       plasmacloud,pa2200)
-               caldata_extract "0:ART" 0x9000 0x2f20
-               ;;
        linksys,ea8300 |\
        linksys,mr8300)
                caldata_extract "ART" 0x9000 0x2f20
                # OEM assigns 4 sequential MACs
                ath10k_patch_mac $(macaddr_setbit_la $(macaddr_add "$(cat /sys/class/net/eth0/address)" 4))
                ;;
+       linksys,whw03)
+               caldata_extract_mmc "0:ART" 0x9000 0x2f20
+               ath10k_patch_mac $(macaddr_add "$(cat /sys/class/net/eth0/address)" 3)
+               ;;
+       netgear,rbr40|\
+       netgear,rbs40|\
        netgear,rbr50|\
        netgear,rbs50|\
        netgear,srr60|\
@@ -57,32 +57,8 @@ case "$FIRMWARE" in
        ;;
 "ath10k/pre-cal-ahb-a000000.wifi.bin")
        case "$board" in
-       8dev,habanero-dvk |\
-       8dev,jalapeno |\
-       alfa-network,ap120c-ac |\
-       cilab,meshpoint-one |\
-       ezviz,cs-w3-wd1200g-eup |\
-       glinet,gl-ap1300 |\
-       glinet,gl-b1300 |\
-       glinet,gl-s1300 |\
-       linksys,ea6350v3 |\
-       mobipromo,cm520-79f |\
-       p2w,r619ac-64m |\
-       p2w,r619ac-128m |\
-       qcom,ap-dk01.1-c1)
-               caldata_extract "ART" 0x1000 0x2f20
-               ;;
-       aruba,ap-303 |\
-       aruba,ap-303h |\
-       aruba,ap-365)
-               caldata_extract "ART" 0x1000 0x2f20
-               ath10k_patch_mac $(mtd_get_mac_binary mfginfo 0x1D)
-               ;;
-       asus,map-ac2200)
-               caldata_extract_ubi "Factory" 0x1000 0x2f20
-               ;;
-       asus,rt-ac58u)
-               CI_UBIPART=UBI_DEV
+       asus,map-ac2200|\
+       asus,rt-ac42u)
                caldata_extract_ubi "Factory" 0x1000 0x2f20
                ;;
        avm,fritzbox-4040)
@@ -98,25 +74,7 @@ case "$FIRMWARE" in
                /usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \
                /usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1")
                ;;
-       buffalo,wtr-m2133hp)
-               caldata_extract "ART" 0x1000 0x2f20
-               ath10k_patch_mac $(mtd_get_mac_binary ORGDATA 0x26)
-               ;;
-       cellc,rtl30vw |\
-       compex,wpj419 |\
-       compex,wpj428 |\
-       edgecore,ecw5211 |\
-       edgecore,oap100 |\
-       engenius,eap1300 |\
-       engenius,eap2200 |\
-       luma,wrtq-329acn|\
-       openmesh,a42 |\
-       openmesh,a62 |\
-       plasmacloud,pa1200 |\
-       plasmacloud,pa2200 |\
-       qxwlan,e2600ac-c1 |\
-       qxwlan,e2600ac-c2 |\
-       unielec,u4019-32m)
+       cellc,rtl30vw)
                caldata_extract "0:ART" 0x1000 0x2f20
                ;;
        devolo,magic-2-wifi-next)
@@ -139,26 +97,38 @@ case "$FIRMWARE" in
                caldata_extract "ART" 0x1000 0x2f20
                ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) 2)
                ;;
+       extreme-networks,ws-ap3915i |\
+       extreme-networks,ws-ap391x)
+               caldata_extract "ART" 0x1000 0x2f20
+               ath10k_patch_mac $(mtd_get_mac_ascii CFG1 RADIOADDR0)
+               ;;
        linksys,ea8300 |\
        linksys,mr8300)
                caldata_extract "ART" 0x1000 0x2f20
                ath10k_patch_mac $(macaddr_add "$(cat /sys/class/net/eth0/address)" 2)
                ;;
-       meraki,mr33)
+       linksys,whw03)
+               caldata_extract_mmc "0:ART" 0x1000 0x2f20
+               ath10k_patch_mac $(macaddr_add "$(cat /sys/class/net/eth0/address)" 1)
+               ;;
+       meraki,mr33 |\
+       meraki,mr74)
                caldata_extract_ubi "ART" 0x1000 0x2f20
                caldata_valid "202f" || caldata_extract "ART" 0x1000 0x2f20
-               ath10k_patch_mac $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 0x66) 2)
                ;;
-       mikrotik,hap-ac2)
+       mikrotik,cap-ac |\
+       mikrotik,hap-ac2 |\
+       mikrotik,hap-ac3 |\
+       mikrotik,hap-ac3-lte6-kit |\
+       mikrotik,wap-ac |\
+       mikrotik,wap-ac-lte |\
+       mikrotik,wap-r-ac)
                wlan_data="/sys/firmware/mikrotik/hard_config/wlan_data"
                ( [ -f "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data" 0x0 0x2f20 ) || \
                ( [ -d "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data/data_0" 0x0 0x2f20 )
                ;;
-       netgear,ex6100v2 |\
-       netgear,ex6150v2)
-               caldata_extract "ART" 0x1000 0x2f20
-               ath10k_patch_mac $(mtd_get_mac_binary dnidata 0x0)
-               ;;
+       netgear,rbr40|\
+       netgear,rbs40|\
        netgear,rbr50|\
        netgear,rbs50|\
        netgear,srr60|\
@@ -166,9 +136,17 @@ case "$FIRMWARE" in
                caldata_extract_mmc "0:ART" 0x1000 0x2f20
                ath10k_patch_mac $(mmc_get_mac_binary ARTMTD 0x0)
                ;;
-       netgear,wac510)
+       pakedge,wr-1)
+               caldata_extract "0:ART" 0x1000 0x2f20
+               ath10k_patch_mac $(macaddr_add $(get_mac_label) 2)
+               ;;
+       teltonika,rutx10|\
+       teltonika,rutx50)
                caldata_extract "0:ART" 0x1000 0x2f20
-               ath10k_patch_mac $(mtd_get_mac_binary "0:MANUDATA" 0x6)
+               ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary "0:CONFIG" 0x0) 2)
+               ;;
+       sony,ncp-hg100-cellular)
+               caldata_extract_mmc "0:ART" 0x1000 0x2f20
                ;;
        zyxel,nbg6617 |\
        zyxel,wre6606)
@@ -179,34 +157,9 @@ case "$FIRMWARE" in
        ;;
 "ath10k/pre-cal-ahb-a800000.wifi.bin")
        case "$board" in
-       8dev,habanero-dvk |\
-       8dev,jalapeno |\
-       alfa-network,ap120c-ac |\
-       cilab,meshpoint-one |\
-       ezviz,cs-w3-wd1200g-eup |\
-       glinet,gl-ap1300 |\
-       glinet,gl-b1300 |\
-       glinet,gl-s1300 |\
-       linksys,ea6350v3 |\
-       mobipromo,cm520-79f |\
-       p2w,r619ac-64m |\
-       p2w,r619ac-128m |\
-       qcom,ap-dk01.1-c1)
-               caldata_extract "ART" 0x5000 0x2f20
-               ;;
-       aruba,ap-303 |\
-       aruba,ap-303h |\
-       aruba,ap-365)
-               caldata_extract "ART" 0x5000 0x2f20
-               ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary mfginfo 0x1D) 1)
-               ;;
        asus,map-ac2200)
                caldata_extract_ubi "Factory" 0x5000 0x2f20
                ;;
-       asus,rt-ac58u)
-               CI_UBIPART=UBI_DEV
-               caldata_extract_ubi "Factory" 0x5000 0x2f20
-               ;;
        avm,fritzbox-4040)
                /usr/bin/fritz_cal_extract -i 1 -s 0x400 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader_config")
                ;;
@@ -220,25 +173,7 @@ case "$FIRMWARE" in
                /usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \
                /usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1")
                ;;
-       buffalo,wtr-m2133hp)
-               caldata_extract "ART" 0x5000 0x2f20
-               ath10k_patch_mac $(mtd_get_mac_binary ORGDATA 0x2c)
-               ;;
-       cellc,rtl30vw |\
-       compex,wpj419 |\
-       compex,wpj428 |\
-       edgecore,ecw5211 |\
-       edgecore,oap100 |\
-       engenius,eap1300 |\
-       engenius,eap2200 |\
-       luma,wrtq-329acn|\
-       openmesh,a42 |\
-       openmesh,a62 |\
-       plasmacloud,pa1200 |\
-       plasmacloud,pa2200 |\
-       qxwlan,e2600ac-c1 |\
-       qxwlan,e2600ac-c2 |\
-       unielec,u4019-32m)
+       cellc,rtl30vw)
                caldata_extract "0:ART" 0x5000 0x2f20
                ;;
        devolo,magic-2-wifi-next)
@@ -261,27 +196,39 @@ case "$FIRMWARE" in
                caldata_extract "ART" 0x5000 0x2f20
                ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) 3)
                ;;
+       extreme-networks,ws-ap3915i |\
+       extreme-networks,ws-ap391x)
+               caldata_extract "ART" 0x5000 0x2f20
+               ath10k_patch_mac $(mtd_get_mac_ascii CFG1 RADIOADDR1)
+               ;;
        linksys,ea8300 |\
        linksys,mr8300)
                caldata_extract "ART" 0x5000 0x2f20
                ath10k_patch_mac $(macaddr_add "$(cat /sys/class/net/eth0/address)" 3)
                ;;
-       meraki,mr33)
+       linksys,whw03)
+               caldata_extract_mmc "0:ART" 0x5000 0x2f20
+               ath10k_patch_mac $(macaddr_add "$(cat /sys/class/net/eth0/address)" 2)
+               ;;
+       meraki,mr33 |\
+       meraki,mr74)
                caldata_extract_ubi "ART" 0x5000 0x2f20
                caldata_valid "202f" || caldata_extract "ART" 0x5000 0x2f20
-               ath10k_patch_mac $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 0x66) 3)
                ;;
-       mikrotik,hap-ac2|\
-       mikrotik,sxtsq-5-ac)
+       mikrotik,cap-ac |\
+       mikrotik,hap-ac2 |\
+       mikrotik,hap-ac3 |\
+       mikrotik,hap-ac3-lte6-kit |\
+       mikrotik,sxtsq-5-ac |\
+       mikrotik,wap-ac |\
+       mikrotik,wap-ac-lte |\
+       mikrotik,wap-r-ac)
                wlan_data="/sys/firmware/mikrotik/hard_config/wlan_data"
                ( [ -f "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data" 0x8000 0x2f20 ) || \
                ( [ -d "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data/data_2" 0x0 0x2f20 )
                ;;
-       netgear,ex6100v2 |\
-       netgear,ex6150v2)
-               caldata_extract "ART" 0x5000 0x2f20
-               ath10k_patch_mac $(mtd_get_mac_binary dnidata 0xc)
-               ;;
+       netgear,rbr40|\
+       netgear,rbs40|\
        netgear,rbr50|\
        netgear,rbs50|\
        netgear,srr60|\
@@ -289,9 +236,17 @@ case "$FIRMWARE" in
                caldata_extract_mmc "0:ART" 0x5000 0x2f20
                ath10k_patch_mac $(mmc_get_mac_binary ARTMTD 0xc)
                ;;
-       netgear,wac510)
+       pakedge,wr-1)
                caldata_extract "0:ART" 0x5000 0x2f20
-               ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary "0:MANUDATA" 0x6) 16)
+               ath10k_patch_mac $(macaddr_add $(get_mac_label) 4)
+               ;;
+       teltonika,rutx10|\
+       teltonika,rutx50)
+               caldata_extract "0:ART" 0x5000 0x2f20
+               ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary "0:CONFIG" 0x0) 3)
+               ;;
+       sony,ncp-hg100-cellular)
+               caldata_extract_mmc "0:ART" 0x5000 0x2f20
                ;;
        zyxel,nbg6617 |\
        zyxel,wre6606)
@@ -300,6 +255,37 @@ case "$FIRMWARE" in
                ;;
        esac
        ;;
+"ath10k/QCA4019/hw1.0/board-ahb-a000000.wifi.bin")
+       case "$board" in
+       mikrotik,cap-ac |\
+       mikrotik,hap-ac2 |\
+       mikrotik,hap-ac3 |\
+       mikrotik,hap-ac3-lte6-kit |\
+       mikrotik,wap-ac |\
+       mikrotik,wap-ac-lte |\
+       mikrotik,wap-r-ac)
+               wlan_data="/sys/firmware/mikrotik/hard_config/wlan_data"
+               ( [ -f "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data" 0x2f20 0x2f20 ) || \
+               ( [ -d "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data/data_0" 0x2f20 0x2f20 )
+               ;;
+       esac
+       ;;
+"ath10k/QCA4019/hw1.0/board-ahb-a800000.wifi.bin")
+       case "$board" in
+       mikrotik,cap-ac |\
+       mikrotik,hap-ac2 |\
+       mikrotik,hap-ac3 |\
+        mikrotik,hap-ac3-lte6-kit |\
+       mikrotik,sxtsq-5-ac |\
+       mikrotik,wap-ac |\
+       mikrotik,wap-ac-lte |\
+       mikrotik,wap-r-ac)
+               wlan_data="/sys/firmware/mikrotik/hard_config/wlan_data"
+               ( [ -f "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data" 0xaf20 0x2f20 ) || \
+               ( [ -d "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data/data_2" 0x2f20 0x2f20 )
+               ;;
+       esac
+       ;;
 *)
        exit 1
        ;;
OpenWrt Source Repository