ipq40xx: add support for Luma Home WRTQ-329ACN

[openwrt/staging/chunkeey.git] / target / linux / ipq40xx / base-files / etc / hotplug.d / firmware / 11-ath10k-caldata

diff --git a/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index 7a9cf6873e7d68c2b8a84037654065312df96217..7a7464cf9a8b9873a4d6d072a0ae0bc2833ee5a4 100644 (file)
--- a/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -31,25 +31,41 @@ case "$FIRMWARE" in
                /usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \
                /usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1")
                ;;
-       linksys,ea8300)
+       buffalo,wtr-m2133hp)
                caldata_extract "ART" 0x9000 0x2f20
-               # OEM assigns 4 sequential MACs
-               ath10k_patch_mac $(macaddr_setbit_la $(macaddr_add "$(cat /sys/class/net/eth0/address)" 4))
+               ath10k_patch_mac $(mtd_get_mac_binary ORGDATA 0x32)
                ;;
+       engenius,eap2200 |\
        openmesh,a62)
                caldata_extract "0:ART" 0x9000 0x2f20
                ;;
+       linksys,ea8300)
+               caldata_extract "ART" 0x9000 0x2f20
+               # OEM assigns 4 sequential MACs
+               ath10k_patch_mac $(macaddr_setbit_la $(macaddr_add "$(cat /sys/class/net/eth0/address)" 4))
+               ;;
        esac
        ;;
 "ath10k/pre-cal-ahb-a000000.wifi.bin")
        case "$board" in
+       8dev,habanero-dvk |\
        8dev,jalapeno |\
        alfa-network,ap120c-ac |\
+       cilab,meshpoint-one |\
+       ezviz,cs-w3-wd1200g-eup |\
        glinet,gl-b1300 |\
+       glinet,gl-s1300 |\
        linksys,ea6350v3 |\
+       mobipromo,cm520-79f |\
        qcom,ap-dk01.1-c1)
                caldata_extract "ART" 0x1000 0x2f20
                ;;
+       aruba,ap-303 |\
+       aruba,ap-303h |\
+       aruba,ap-365)
+               caldata_extract "ART" 0x1000 0x2f20
+               ath10k_patch_mac $(mtd_get_mac_binary mfginfo 0x1D)
+               ;;
        asus,map-ac2200)
                caldata_extract_ubi "Factory" 0x1000 0x2f20
                ;;
@@ -61,6 +77,7 @@ case "$FIRMWARE" in
                /usr/bin/fritz_cal_extract -i 1 -s 0x400 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader_config")
                ;;
        avm,fritzbox-7530 |\
+       avm,fritzrepeater-1200 |\
        avm,fritzrepeater-3000)
                /usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
                /usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
@@ -69,8 +86,18 @@ case "$FIRMWARE" in
                /usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \
                /usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1")
                ;;
+       buffalo,wtr-m2133hp)
+               caldata_extract "ART" 0x1000 0x2f20
+               ath10k_patch_mac $(mtd_get_mac_binary ORGDATA 0x26)
+               ;;
+       cellc,rtl30vw |\
+       compex,wpj419 |\
        compex,wpj428 |\
+       edgecore,ecw5211 |\
+       edgecore,oap100 |\
        engenius,eap1300 |\
+       engenius,eap2200 |\
+       luma,wrtq-329acn|\
        openmesh,a42 |\
        openmesh,a62 |\
        qxwlan,e2600ac-c1 |\
@@ -78,6 +105,18 @@ case "$FIRMWARE" in
        unielec,u4019-32m)
                caldata_extract "0:ART" 0x1000 0x2f20
                ;;
+       dlink,dap-2610)
+               caldata_extract "ART" 0x1000 0x2f20
+               ath10k_patch_mac $(mtd_get_mac_ascii bdcfg wlanmac)
+               ;;
+       engenius,emd1)
+               caldata_extract "0:ART" 0x1000 0x2f20
+               ath10k_patch_mac $(mtd_get_mac_ascii 0:APPSBLENV wlanaddr)
+               ;;
+       engenius,emr3500)
+               caldata_extract "0:ART" 0x1000 0x2f20
+               ath10k_patch_mac $(mtd_get_mac_ascii 0:APPSBLENV ethaddr)
+               ;;
        engenius,ens620ext)
                caldata_extract "ART" 0x1000 0x2f20
                ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) +2)
@@ -105,13 +144,24 @@ case "$FIRMWARE" in
        ;;
 "ath10k/pre-cal-ahb-a800000.wifi.bin")
        case "$board" in
+       8dev,habanero-dvk |\
        8dev,jalapeno |\
        alfa-network,ap120c-ac |\
+       cilab,meshpoint-one |\
+       ezviz,cs-w3-wd1200g-eup |\
        glinet,gl-b1300 |\
+       glinet,gl-s1300 |\
        linksys,ea6350v3 |\
+       mobipromo,cm520-79f |\
        qcom,ap-dk01.1-c1)
                caldata_extract "ART" 0x5000 0x2f20
                ;;
+       aruba,ap-303 |\
+       aruba,ap-303h |\
+       aruba,ap-365)
+               caldata_extract "ART" 0x5000 0x2f20
+               ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary mfginfo 0x1D) +1)
+               ;;
        asus,map-ac2200)
                caldata_extract_ubi "Factory" 0x5000 0x2f20
                ;;
@@ -123,6 +173,7 @@ case "$FIRMWARE" in
                /usr/bin/fritz_cal_extract -i 1 -s 0x400 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader_config")
                ;;
        avm,fritzbox-7530 |\
+       avm,fritzrepeater-1200 |\
        avm,fritzrepeater-3000)
                /usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
                /usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
@@ -131,15 +182,37 @@ case "$FIRMWARE" in
                /usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \
                /usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1")
                ;;
+       buffalo,wtr-m2133hp)
+               caldata_extract "ART" 0x5000 0x2f20
+               ath10k_patch_mac $(mtd_get_mac_binary ORGDATA 0x2c)
+               ;;
+       cellc,rtl30vw |\
+       compex,wpj419 |\
        compex,wpj428 |\
+       edgecore,ecw5211 |\
+       edgecore,oap100 |\
        engenius,eap1300 |\
+       engenius,eap2200 |\
+       luma,wrtq-329acn|\
        openmesh,a42 |\
        openmesh,a62 |\
        qxwlan,e2600ac-c1 |\
-       qxwlan,e2600ac-c2 |
+       qxwlan,e2600ac-c2 |\
        unielec,u4019-32m)
                caldata_extract "0:ART" 0x5000 0x2f20
                ;;
+       dlink,dap-2610)
+               caldata_extract "ART" 0x5000 0x2f20
+               ath10k_patch_mac $(mtd_get_mac_ascii bdcfg wlanmac_a)
+               ;;
+       engenius,emd1)
+               caldata_extract "0:ART" 0x5000 0x2f20
+               ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii 0:APPSBLENV wlanaddr) +1)
+               ;;
+       engenius,emr3500)
+               caldata_extract "0:ART" 0x5000 0x2f20
+               ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii 0:APPSBLENV ethaddr) +1)
+               ;;
        engenius,ens620ext)
                caldata_extract "ART" 0x5000 0x2f20
                ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) +3)