ipq40xx: only include ath10k-board-qca4019 for the generic subtarget

[openwrt/staging/chunkeey.git] / target / linux / ipq40xx / files / arch / arm / boot / dts / qcom-ipq4018-nbg6617.dts

diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-nbg6617.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-nbg6617.dts
index a8c144f928e5c8dea95f767944609a7d27052fff..caafc1beb44d58b560357faed327f0e806c0c96c 100644 (file)
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-nbg6617.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-nbg6617.dts
@@ -142,29 +142,29 @@
                pinctrl-names = "default";
 
                power: power {
-                       label = "nbg6617:green:power";
+                       label = "green:power";
                        gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
                };
 
                usb {
-                       label = "nbg6617:green:usb";
+                       label = "green:usb";
                        gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
                        trigger-sources = <&usb2_port1>, <&usb3_port1>, <&usb3_port2>;
                        linux,default-trigger = "usbport";
                };
 
-               wlan2G {
-                       label = "nbg6617:green:wlan2G";
+               wlan2g {
+                       label = "green:wlan2g";
                        gpios = <&tlmm 58 GPIO_ACTIVE_HIGH>;
                };
 
-               wlan5G {
-                       label = "nbg6617:green:wlan5G";
+               wlan5g {
+                       label = "green:wlan5g";
                        gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>;
                };
 
                wps {
-                       label = "nbg6617:green:wps";
+                       label = "green:wps";
                        gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>;
                };
        };
@@ -210,10 +210,10 @@
        status = "okay";
        cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
 
-       mx25l25635f@0 {
-               compatible = "mx25l25635f", "jedec,spi-nor";
+       flash@0 {
+               compatible = "jedec,spi-nor";
                reg = <0>;
-               spi-max-frequency = <24000000>;
+               spi-max-frequency = <50000000>;
                status = "okay";
                m25p,fast-read;