+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include "qcom-ipq4018-rutx.dtsi"
-
-/ {
- model = "Teltonika RUTX50";
- compatible = "teltonika,rutx50";
-
- aliases {
- led-boot = &led_rssi0;
- led-failsafe = &led_rssi0;
- led-running = &led_rssi0;
- led-upgrade = &led_rssi0;
- label-mac-device = &gmac;
- };
-
- soc {
- gpio-export {
- compatible = "gpio-export";
- #size-cells = <0>;
-
- gpio_modem_reset {
- gpio-export,name = "modem_reset";
- gpio-export,output = <0>;
- gpios = <&shift_io 8 GPIO_ACTIVE_HIGH>;
- };
-
- gpio_modem_power {
- gpio-export,name = "modem_power";
- gpio-export,output = <0>;
- gpios = <&shift_io 9 GPIO_ACTIVE_HIGH>;
- };
-
- gpio_out_1 {
- gpio-export,name = "sim-select";
- /* 0 = SIM1 ; 1 = SIM2 */
- gpio-export,output = <0>;
- gpios = <&shift_io 10 GPIO_ACTIVE_HIGH>;
- };
-
- gpio_in_1 {
- gpio-export,name = "sim-detect";
- gpio-export,input = <0>;
- gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- led-0 {
- label = "green:sim1";
- gpios = <&shift_io 14 GPIO_ACTIVE_HIGH>;
- };
-
- led-1 {
- label = "green:sim2";
- gpios = <&shift_io 15 GPIO_ACTIVE_HIGH>;
- };
-
- led-2 {
- label = "green:eth";
- gpios = <&shift_io 6 GPIO_ACTIVE_HIGH>;
- };
-
- led-3 {
- label = "green:wifi";
- gpios = <&shift_io 7 GPIO_ACTIVE_HIGH>;
- };
-
- led-4 {
- label = "green:3g";
- gpios = <&shift_io 5 GPIO_ACTIVE_HIGH>;
- };
-
- led-5 {
- label = "green:4g";
- gpios = <&shift_io 4 GPIO_ACTIVE_HIGH>;
- };
-
- led-6 {
- label = "green:5g";
- gpios = <&shift_io 3 GPIO_ACTIVE_HIGH>;
- };
-
- led_rssi0: led-7 {
- label = "green:rssi0";
- gpios = <&shift_io 0 GPIO_ACTIVE_HIGH>;
- };
-
- led-8 {
- label = "green:rssi1";
- gpios = <&shift_io 1 GPIO_ACTIVE_HIGH>;
- };
-
- led-9 {
- label = "green:rssi2";
- gpios = <&shift_io 2 GPIO_ACTIVE_HIGH>;
- };
-
- led-10 {
- label = "green:wifi2g";
- gpios = <&shift_io 12 GPIO_ACTIVE_HIGH>;
- };
-
- led-11 {
- label = "green:wifi5g";
- gpios = <&shift_io 13 GPIO_ACTIVE_HIGH>;
- };
- };
-
- spi-gpio {
- compatible = "spi-gpio";
- #address-cells = <1>;
- #size-cells = <0>;
-
- gpio-sck = <&tlmm 1 GPIO_ACTIVE_HIGH>;
- gpio-mosi = <&tlmm 3 GPIO_ACTIVE_HIGH>;
- cs-gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
- num-chipselects = <1>;
-
- shift_io: shift_io@0 {
- compatible = "fairchild,74hc595";
- reg = <0>;
- gpio-controller;
- #gpio-cells = <2>;
- /* Attn: This is specific to RUTX50 in Teltonika GPL */
- registers-number = <2>;
- spi-max-frequency = <10000000>;
- };
- };
- };
-};
-
-&wifi0 {
- status = "okay";
- qcom,ath10k-calibration-variant = "Teltonika-RUTX10";
-};
-
-&wifi1 {
- status = "okay";
- qcom,ath10k-calibration-variant = "Teltonika-RUTX10";
-};
-
-&gmac {
- status = "okay";
-};
-
-&switch {
- status = "okay";
-};
-
-&swport1 {
- status = "okay";
-
- label = "lan1";
-};
-
-&swport2 {
- status = "okay";
-
- label = "lan2";
-};
-
-&swport3 {
- status = "okay";
-
- label = "lan3";
-};
-
-&swport4 {
- status = "okay";
-
- label = "lan4";
-};
-
-&swport5 {
- status = "okay";
-
- label = "wan";
-};