+++ /dev/null
-/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
- * Copyright (c) 2019, Robert Marko <robimarko@gmail.com>
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- *
- */
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/leds/common.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
- model = "Mikrotik Wireless Wire Dish LHGG-60ad";
- compatible = "mikrotik,lhgg-60ad";
-
- memory {
- device_type = "memory";
- reg = <0x80000000 0x10000000>;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- aliases {
- led-boot = &user;
- led-failsafe = &user;
- led-running = &user;
- led-upgrade = &user;
- };
-
- soc {
- rng@22000 {
- status = "okay";
- };
-
- mdio@90000 {
- status = "okay";
- };
-
- counter@4a1000 {
- compatible = "qcom,qca-gcnt";
- reg = <0x4a1000 0x4>;
- };
-
- tcsr@1949000 {
- compatible = "qcom,tcsr";
- reg = <0x1949000 0x100>;
- qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
- };
-
- ess_tcsr@1953000 {
- compatible = "qcom,tcsr";
- reg = <0x1953000 0x1000>;
- qcom,ess-interface-select = <TCSR_ESS_PSGMII_RGMII5>;
- };
-
- tcsr@1957000 {
- compatible = "qcom,tcsr";
- reg = <0x1957000 0x100>;
- qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
- };
-
- crypto@8e3a000 {
- status = "okay";
- };
-
- watchdog@b017000 {
- status = "okay";
- };
- };
-
- keys {
- compatible = "gpio-keys";
-
- reset {
- label = "reset";
- gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- power: power {
- function = LED_FUNCTION_POWER;
- color = <LED_COLOR_ID_BLUE>;
- gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
- default-state = "keep";
- panic-indicator;
- };
-
- user: user {
- label = "yellow:user";
- gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
- };
-
- wlan {
- function = LED_FUNCTION_WLAN;
- color = <LED_COLOR_ID_GREEN>;
- gpios = <&tlmm 58 GPIO_ACTIVE_HIGH>;
- };
-
- align-left {
- label = "green:align-left";
- gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>;
- };
-
- align-right {
- label = "green:align-right";
- gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
- };
-
- wlan-rx {
- label = "green:align-down";
- gpios = <&tlmm 4 GPIO_ACTIVE_HIGH>;
- };
-
- wlan-tx {
- label = "green:align-up";
- gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>;
- };
- };
-};
-
-&tlmm {
- serial_pins: serial_pinmux {
- mux {
- pins = "gpio60", "gpio61";
- function = "blsp_uart0";
- bias-disable;
- };
- };
-
- spi_0_pins: spi-0-pinmux {
- pinmux {
- function = "blsp_spi0";
- pins = "gpio13", "gpio14", "gpio15";
- bias-disable;
- };
-
- pinmux_cs {
- function = "gpio";
- pins = "gpio12";
- bias-disable;
- output-high;
- };
- };
-};
-
-&blsp_dma {
- status = "okay";
-};
-
-&blsp1_spi1 {
- pinctrl-0 = <&spi_0_pins>;
- pinctrl-names = "default";
- cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
- status = "okay";
-
- m25p80@0 {
- reg = <0>;
- compatible = "jedec,spi-nor";
- spi-max-frequency = <24000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "Qualcomm";
- reg = <0x0 0x80000>;
- read-only;
- };
-
- partition@80000 {
- compatible = "mikrotik,routerboot-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
- label = "RouterBoot";
- reg = <0x80000 0x80000>;
-
- hard_config {
- read-only;
- size = <0x2000>;
- };
-
- dtb_config {
- read-only;
- };
-
- soft_config {
- };
- };
-
- partition@100000 {
- compatible = "mikrotik,minor";
- label = "firmware";
- reg = <0x100000 0xf00000>;
- };
- };
- };
-};
-
-&blsp1_uart1 {
- pinctrl-0 = <&serial_pins>;
- pinctrl-names = "default";
- status = "okay";
-};
-
-&cryptobam {
- status = "okay";
-};
-
-&pcie0 {
- status = "okay";
- perst-gpio = <&tlmm 42 GPIO_ACTIVE_HIGH>;
-
- bridge@0,0 {
- reg = <0x00000000 0 0 0 0>;
- #address-cells = <3>;
- #size-cells = <2>;
- ranges;
-
- /* wil6210 802.11ad card */
- wifi: wifi@1,0 {
- status = "okay";
- /* wil6210 driver has no compatible */
- reg = <0x00010000 0 0 0 0>;
- };
- };
-};
-
-ðphy1 {
- status = "disabled";
-};
-
-ðphy2 {
- status = "disabled";
-};
-
-ðphy3 {
- status = "disabled";
-};
-
-ðphy4 {
- status = "disabled";
-};
-
-&psgmiiphy {
- status = "disabled";
-};
-
-&gmac {
- status = "okay";
-};
-
-&switch {
- status = "okay";
-
- /delete-property/ psgmii-ethphy;
-};
-
-&swport5 {
- status = "okay";
-
- label = "lan";
- phy-handle = <ðphy0>;
- phy-mode = "rgmii-id";
-};
projects / openwrt / openwrt.git / blobdiff