+++ /dev/null
-/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
- * Copyright (c) 2019, Nguyen Dinh Phi <phi_nguyen@compex.com.sg>
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- *
- */
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
- model = "Compex WPJ419";
- compatible = "compex,wpj419", "qcom,ipq4019";
-
- memory {
- device_type = "memory";
- reg = <0x80000000 0x10000000>;
- };
-
- reserved-memory {
- ranges;
- rsvd1@87000000 {
- /* Reserved for other subsystem */
- reg = <0x87000000 0x500000>;
- no-map;
- };
- wifi_dump@87500000 {
- reg = <0x87500000 0x600000>;
- no-map;
- };
-
- rsvd2@87B00000 {
- /* Reserved for other subsystem */
- reg = <0x87B00000 0x500000>;
- no-map;
- };
- };
-
- chosen {
- bootargs-append = " ubi.mtd=ubi root=/dev/ubiblock0_1";
- };
-
- soc {
- pinctrl@1000000 {
- mdio_pins: mdio_pinmux {
- mux_1 {
- pins = "gpio6";
- function = "mdio";
- bias-pull-up;
- };
-
- mux_2 {
- pins = "gpio7";
- function = "mdc";
- bias-pull-up;
- };
- };
-
- serial_0_pins: serial_pinmux {
- mux {
- pins = "gpio16", "gpio17";
- function = "blsp_uart0";
- bias-disable;
- };
- };
-
- serial_1_pins: serial1_pinmux {
- mux {
- pins = "gpio8", "gpio9", "gpio10", "gpio11";
- function = "blsp_uart1";
- bias-disable;
- };
- };
-
- spi_0_pins: spi_0_pinmux {
- pinmux {
- function = "blsp_spi0";
- pins = "gpio13", "gpio14", "gpio15";
- bias-disable;
- };
-
- pinmux_cs {
- function = "gpio";
- pins = "gpio12";
- bias-disable;
- output-high;
- };
- };
-
- i2c_0_pins: i2c_0_pinmux {
- mux {
- pins = "gpio20", "gpio21";
- function = "blsp_i2c0";
- bias-disable;
- };
- };
-
- nand_pins: nand_pins {
- pullups {
- pins = "gpio52", "gpio53", "gpio58", "gpio59";
- function = "qpic";
- bias-pull-up;
- };
-
- pulldowns {
- pins = "gpio54", "gpio55", "gpio56",
- "gpio57", "gpio60", "gpio61",
- "gpio62", "gpio63", "gpio64",
- "gpio65", "gpio66", "gpio67",
- "gpio68", "gpio69";
- function = "qpic";
- bias-pull-down;
- };
- };
-
- led_0_pins: led0_pinmux {
- mux_1 {
- pins = "gpio36";
- function = "led0";
- bias-pull-down;
- };
- mux_2 {
- pins = "gpio40";
- function = "led4";
- bias-pull-down;
- };
- };
- };
-
- blsp_dma: dma@7884000 {
- status = "okay";
- };
-
- spi_0: spi@78b5000 {
- pinctrl-0 = <&spi_0_pins>;
- pinctrl-names = "default";
- status = "okay";
- cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>, <&tlmm 41 GPIO_ACTIVE_HIGH>;
- num-cs = <2>;
-
- flash0@0 {
- reg = <0>;
- compatible = "jedec,spi-nor";
- spi-max-frequency = <24000000>;
- broken-flash-reset;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "0:SBL1";
- reg = <0x000000 0x040000>;
- read-only;
- };
-
- partition@40000 {
- label = "0:MIBIB";
- reg = <0x040000 0x020000>;
- read-only;
- };
-
- partition@60000 {
- label = "0:QSEE";
- reg = <0x060000 0x060000>;
- read-only;
- };
-
- partition@c0000 {
- label = "0:CDT";
- reg = <0x0c0000 0x010000>;
- read-only;
- };
-
- partition@d0000 {
- label = "0:DDRPARAMS";
- reg = <0x0d0000 0x010000>;
- read-only;
- };
-
- partition@e0000 {
- label = "u-boot-env";
- reg = <0x0e0000 0x010000>;
- };
-
- partition@f0000 {
- label = "u-boot";
- reg = <0x0f0000 0x080000>;
- read-only;
- };
-
- partition@170000 {
- label = "0:ART";
- reg = <0x170000 0x010000>;
- read-only;
-
- nvmem-layout {
- compatible = "fixed-layout";
- #address-cells = <1>;
- #size-cells = <1>;
-
- precal_art_1000: precal@1000 {
- reg = <0x1000 0x2f20>;
- };
-
- precal_art_5000: precal@5000 {
- reg = <0x5000 0x2f20>;
- };
- };
- };
- };
- };
-
- nand@1 {
- reg = <1>;
- status = "okay";
- compatible = "spi-nand";
- spi-max-frequency = <24000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- /* The device has 128MB, but we can only address
- * 64MB because of the bootloader's default settings.
- * This is due to the old mt29f driver,
- * which detected the deivce with only 64MB
- */
- partition@0 {
- label = "ubi";
- reg = <0x0000000 0x4000000>;
- };
- };
- };
- };
-
- mdio@90000 {
- status = "okay";
- pinctrl-0 = <&mdio_pins>;
- pinctrl-names = "default";
- reset-gpios = <&tlmm 47 GPIO_ACTIVE_LOW>;
- reset-delay-us = <5000>;
- };
-
- tcsr@194b000 {
- /* select hostmode */
- compatible = "qcom,tcsr";
- reg = <0x194b000 0x100>;
- qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
- status = "okay";
- };
-
- tcsr@1949000 {
- compatible = "qcom,tcsr";
- reg = <0x1949000 0x100>;
- qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
- };
-
- ess_tcsr@1953000 {
- compatible = "qcom,tcsr";
- reg = <0x1953000 0x1000>;
- qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
- };
-
- tcsr@1957000 {
- compatible = "qcom,tcsr";
- reg = <0x1957000 0x100>;
- qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
- };
-
- i2c_0: i2c@78b7000 {
- pinctrl-0 = <&i2c_0_pins>;
- pinctrl-names = "default";
- status = "okay";
- };
-
- serial@78af000 {
- pinctrl-0 = <&serial_0_pins>;
- pinctrl-names = "default";
- status = "okay";
- };
-
- serial@78b0000 {
- pinctrl-0 = <&serial_1_pins>;
- pinctrl-names = "default";
- status = "okay";
- };
-
- usb3_ss_phy: ssphy@9a000 {
- status = "okay";
- };
-
- usb3_hs_phy: hsphy@a6000 {
- status = "okay";
- };
-
- usb3: usb3@8af8800 {
- status = "okay";
- };
-
- usb2_hs_phy: hsphy@a8000 {
- status = "okay";
- };
-
- usb2: usb2@60f8800 {
- status = "okay";
- };
-
- cryptobam: dma@8e04000 {
- status = "okay";
- };
-
- crypto@8e3a000 {
- status = "okay";
- };
-
- watchdog@b017000 {
- status = "okay";
- };
-
- qpic_bam: dma@7984000 {
- status = "okay";
- };
-
- pcie0: pci@40000000 {
- status = "okay";
- perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>;
- wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>;
- };
- };
-
- keys {
- compatible = "gpio-keys";
-
- reset {
- label = "reset";
- gpios = <&tlmm 18 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-};
-
-&nand {
- pinctrl-0 = <&nand_pins>;
- pinctrl-names = "default";
- status = "okay";
-};
-
-&wifi0 {
- status = "okay";
- nvmem-cell-names = "pre-calibration";
- nvmem-cells = <&precal_art_1000>;
-};
-
-&wifi1 {
- status = "okay";
- nvmem-cell-names = "pre-calibration";
- nvmem-cells = <&precal_art_5000>;
-};
projects / openwrt / openwrt.git / blobdiff