+++ /dev/null
-/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
- * Copyright (c) 2018, David Bauer <mail@david-bauer.net>
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- *
- */
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
- model = "Netgear EX61X0v2";
- compatible = "netgear,ex61x0v2", "qcom,ipq4019";
-
- soc {
- mdio@90000 {
- status = "okay";
- };
-
- ess-psgmii@98000 {
- status = "okay";
- };
-
- tcsr@1949000 {
- compatible = "qcom,tcsr";
- reg = <0x1949000 0x100>;
- qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
- };
-
- ess_tcsr@1953000 {
- compatible = "qcom,tcsr";
- reg = <0x1953000 0x1000>;
- qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
- };
-
- tcsr@1957000 {
- compatible = "qcom,tcsr";
- reg = <0x1957000 0x100>;
- qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
- };
-
- crypto@8e3a000 {
- status = "okay";
- };
-
- watchdog@b017000 {
- status = "okay";
- };
-
- ess-switch@c000000 {
- status = "okay";
- };
-
- edma@c080000 {
- status = "okay";
- qcom,num_gmac = <1>;
- };
- };
-
- aliases {
- led-boot = &power_amber;
- led-failsafe = &power_amber;
- led-running = &power_green;
- led-upgrade = &power_amber;
- };
-
- keys {
- compatible = "gpio-keys";
-
- wps {
- label = "wps";
- gpios = <&tlmm 0 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
-
- reset {
- label = "reset";
- gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-
- led_spi {
- compatible = "spi-gpio";
- #address-cells = <1>;
- #size-cells = <0>;
-
- gpio-sck = <&tlmm 5 GPIO_ACTIVE_HIGH>;
- gpio-mosi = <&tlmm 4 GPIO_ACTIVE_HIGH>;
- num-chipselects = <0>;
-
- led_gpio: led_gpio@0 {
- compatible = "fairchild,74hc595";
- reg = <0>;
- gpio-controller;
- #gpio-cells = <2>;
- registers-number = <1>;
- spi-max-frequency = <1000000>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- power_amber: power_amber {
- label = "ex61x0v2:amber:power";
- gpios = <&led_gpio 7 GPIO_ACTIVE_LOW>;
- };
-
- power_green: power_green {
- label = "ex61x0v2:green:power";
- gpios = <&led_gpio 6 GPIO_ACTIVE_LOW>;
- };
-
- right {
- label = "ex61x0v2:blue:right";
- gpios = <&led_gpio 5 GPIO_ACTIVE_LOW>;
- };
-
- left {
- label = "ex61x0v2:blue:left";
- gpios = <&led_gpio 4 GPIO_ACTIVE_LOW>;
- };
-
- client_green {
- label = "ex61x0v2:green:client";
- gpios = <&led_gpio 3 GPIO_ACTIVE_LOW>;
- };
-
- client_red {
- label = "ex61x0v2:red:client";
- gpios = <&led_gpio 2 GPIO_ACTIVE_LOW>;
- };
-
- router_green {
- label = "ex61x0v2:green:router";
- gpios = <&led_gpio 1 GPIO_ACTIVE_LOW>;
- };
-
- router_red {
- label = "ex61x0v2:red:router";
- gpios = <&led_gpio 0 GPIO_ACTIVE_LOW>;
- };
-
- wps {
- label = "ex61x0v2:green:wps";
- gpios = <&tlmm 1 GPIO_ACTIVE_LOW>;
- };
- };
-};
-
-&tlmm {
- serial_pins: serial_pinmux {
- mux {
- pins = "gpio60", "gpio61";
- function = "blsp_uart0";
- bias-disable;
- };
- };
-
- spi_0_pins: spi_0_pinmux {
- pin {
- function = "blsp_spi0";
- pins = "gpio55", "gpio56", "gpio57";
- drive-strength = <12>;
- bias-disable;
- };
- pin_cs {
- function = "gpio";
- pins = "gpio54";
- drive-strength = <2>;
- bias-disable;
- output-high;
- };
- };
-};
-
-&blsp1_spi1 {
- pinctrl-0 = <&spi_0_pins>;
- pinctrl-names = "default";
- status = "okay";
- cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
-
- mx25l12805d@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <24000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition0@0 {
- label = "SBL1";
- reg = <0x00000000 0x00040000>;
- read-only;
- };
-
- partition1@40000 {
- label = "MIBIB";
- reg = <0x00040000 0x00020000>;
- read-only;
- };
-
- partition2@60000 {
- label = "QSEE";
- reg = <0x00060000 0x00060000>;
- read-only;
- };
-
- partition3@c0000 {
- label = "CDT";
- reg = <0x000c0000 0x00010000>;
- read-only;
- };
-
- partition4@d0000 {
- label = "DDRPARAMS";
- reg = <0x000d0000 0x00010000>;
- read-only;
- };
-
- partition5@E0000 {
- label = "APPSBLENV";
- reg = <0x000e0000 0x00010000>;
- read-only;
- };
-
- partition6@F0000 {
- label = "APPSBL";
- reg = <0x000f0000 0x00080000>;
- read-only;
- };
-
- partition7@170000 {
- label = "ART";
- reg = <0x00170000 0x00010000>;
- read-only;
- };
-
- partition8@180000 {
- label = "config";
- reg = <0x00180000 0x00010000>;
- read-only;
- };
-
- partition9@190000 {
- label = "pot";
- reg = <0x00190000 0x00010000>;
- read-only;
- };
-
- partition10@1a0000 {
- label = "dnidata";
- reg = <0x001a0000 0x00010000>;
- read-only;
- };
-
- partition11@1b0000 {
- compatible = "denx,fit";
- label = "firmware";
- reg = <0x001b0000 0x00e10000>;
- };
-
- partition12@fc0000 {
- label = "language";
- reg = <0x00fc0000 0x00040000>;
- read-only;
- };
- };
- };
-};
-
-&blsp1_uart1 {
- pinctrl-0 = <&serial_pins>;
- pinctrl-names = "default";
- status = "okay";
-};
-
-&blsp_dma {
- status = "okay";
-};
-
-&cryptobam {
- status = "okay";
-};
-
-&wifi0 {
- status = "okay";
-};
-
-&wifi1 {
- status = "okay";
-};
projects / openwrt / openwrt.git / blobdiff