+++ /dev/null
-/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
- * Copyright (c) 2018, Robert Marko <robimarko@gmail.com>
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- *
- */
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
- model = "8devices Jalapeno";
- compatible = "8dev,jalapeno", "qcom,ipq4019";
-
- soc {
- mdio@90000 {
- status = "okay";
- pinctrl-0 = <&mdio_pins>;
- pinctrl-names = "default";
- };
-
- ess-psgmii@98000 {
- status = "okay";
- };
-
- counter@4a1000 {
- compatible = "qcom,qca-gcnt";
- reg = <0x4a1000 0x4>;
- };
-
- tcsr@1949000 {
- compatible = "qcom,tcsr";
- reg = <0x1949000 0x100>;
- qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
- };
-
- tcsr@194b000 {
- /* select hostmode */
- compatible = "qcom,tcsr";
- reg = <0x194b000 0x100>;
- qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
- status = "okay";
- };
-
- ess_tcsr@1953000 {
- compatible = "qcom,tcsr";
- reg = <0x1953000 0x1000>;
- qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
- };
-
- tcsr@1957000 {
- compatible = "qcom,tcsr";
- reg = <0x1957000 0x100>;
- qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
- };
-
- usb2: usb2@60f8800 {
- status = "okay";
- };
-
- usb3: usb3@8af8800 {
- status = "okay";
- };
-
- crypto@8e3a000 {
- status = "okay";
- };
-
- watchdog@b017000 {
- status = "okay";
- };
-
- ess-switch@c000000 {
- status = "okay";
- switch_lan_bmp = <0x10>; /* lan port bitmap */
- };
-
- edma@c080000 {
- status = "okay";
- };
- };
-};
-
-&tlmm {
- mdio_pins: mdio_pinmux {
- pinmux_1 {
- pins = "gpio53";
- function = "mdio";
- };
- pinmux_2 {
- pins = "gpio52";
- function = "mdc";
- };
- pinconf {
- pins = "gpio52", "gpio53";
- bias-pull-up;
- };
- };
-
- serial_pins: serial_pinmux {
- mux {
- pins = "gpio60", "gpio61";
- function = "blsp_uart0";
- bias-disable;
- };
- };
-
- spi_0_pins: spi_0_pinmux {
- pin {
- function = "blsp_spi0";
- pins = "gpio55", "gpio56", "gpio57";
- drive-strength = <2>;
- bias-disable;
- };
- pin_cs {
- function = "gpio";
- pins = "gpio54", "gpio59";
- drive-strength = <2>;
- bias-disable;
- output-high;
- };
- };
-};
-
-&blsp_dma {
- status = "okay";
-};
-
-&blsp1_spi1 {
- pinctrl-0 = <&spi_0_pins>;
- pinctrl-names = "default";
- cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>, <&tlmm 59 GPIO_ACTIVE_HIGH>;
- status = "okay";
-
- m25p80@0 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
- compatible = "jedec,spi-nor";
- spi-max-frequency = <24000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition0@0 {
- label = "SBL1";
- reg = <0x00000000 0x00040000>;
- read-only;
- };
- partition1@40000 {
- label = "MIBIB";
- reg = <0x00040000 0x00020000>;
- read-only;
- };
- partition2@60000 {
- label = "QSEE";
- reg = <0x00060000 0x00060000>;
- read-only;
- };
- partition3@c0000 {
- label = "CDT";
- reg = <0x000c0000 0x00010000>;
- read-only;
- };
- partition4@d0000 {
- label = "DDRPARAMS";
- reg = <0x000d0000 0x00010000>;
- read-only;
- };
- partition5@e0000 {
- label = "APPSBLENV"; /* uboot env*/
- reg = <0x000e0000 0x00010000>;
- read-only;
- };
- partition5@f0000 {
- label = "APPSBL"; /* uboot */
- reg = <0x000f0000 0x00080000>;
- read-only;
- };
- partition5@170000 {
- label = "ART";
- reg = <0x00170000 0x00010000>;
- read-only;
- };
- };
- };
-
- mt29f@1 {
- status = "okay";
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "spinand,mt29f", "w25n01gv";
- reg = <1>;
- spi-max-frequency = <24000000>;
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition0@0 {
- label = "ubi";
- reg = <0x00000000 0x08000000>;
- };
- };
- };
-};
-
-&blsp1_uart1 {
- pinctrl-0 = <&serial_pins>;
- pinctrl-names = "default";
- status = "okay";
-};
-
-&cryptobam {
- status = "okay";
-};
-
-&gmac0 {
- qcom,poll_required = <1>;
- qcom,poll_required_dynamic = <1>;
- qcom,phy_mdio_addr = <3>;
- vlan_tag = <1 0x10>;
-};
-
-&gmac1 {
- qcom,poll_required = <1>;
- qcom,poll_required_dynamic = <1>;
- qcom,phy_mdio_addr = <4>;
- vlan_tag = <2 0x20>;
-};
-
-&wifi0 {
- status = "okay";
- qcom,ath10k-calibration-variant = "8devices-Jalapeno";
-};
-
-&wifi1 {
- status = "okay";
- qcom,ath10k-calibration-variant = "8devices-Jalapeno";
-};
-
-&usb3_ss_phy {
- status = "okay";
-};
-
-&usb3_hs_phy {
- status = "okay";
-};
-
-&usb2_hs_phy {
- status = "okay";
-};
projects / openwrt / openwrt.git / blobdiff