ipq40xx: drop 6.1 support

[openwrt/staging/blocktrron.git] / target / linux / ipq40xx / files-6.1 / arch / arm / boot / dts / qcom-ipq4018-magic-2-wifi-next.dts

diff --git a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4018-magic-2-wifi-next.dts b/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4018-magic-2-wifi-next.dts
deleted file mode 100644 (file)
index 501aed5..0000000
--- a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4018-magic-2-wifi-next.dts
+++ /dev/null
@@ -1,258 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/leds/common.h>
-
-/ {
-       model = "devolo Magic 2 WiFi next";
-       compatible = "devolo,magic-2-wifi-next";
-
-       memory {
-               device_type = "memory";
-               reg = <0x80000000 0x10000000>;
-       };
-
-       soc {
-               rng@22000 {
-                       status = "okay";
-               };
-
-               mdio@90000 {
-                       status = "okay";
-                       pinctrl-0 = <&mdio_pins>;
-                       pinctrl-names = "default";
-                       reset-gpios = <&tlmm 59 GPIO_ACTIVE_LOW>;
-                       reset-delay-us = <2000>;
-               };
-
-               crypto@8e3a000 {
-                       status = "okay";
-               };
-
-               watchdog@b017000 {
-                       status = "okay";
-               };
-
-               gpio_export {
-                       compatible = "gpio-export";
-                       #size-cells = <0>;
-
-                       plc {
-                               gpio-export,name = "plc-enable";
-                               gpio-export,output = <1>;
-                               gpios = <&tlmm 63 GPIO_ACTIVE_HIGH>;
-                       };
-               };
-
-       };
-
-       keys {
-               compatible = "gpio-keys";
-
-               wlan {
-                       label = "WLAN";
-                       gpios = <&tlmm 5 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_WPS_BUTTON>;
-               };
-
-               reset {
-                       label = "Reset";
-                       gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
-                       linux,code = <KEY_RESTART>;
-               };
-       };
-
-       leds {
-               compatible = "gpio-leds";
-
-               status_dlan {
-                       label = "white:dlan";
-                       gpios = <&tlmm 4 GPIO_ACTIVE_LOW>;
-                       default-state = "keep";
-               };
-
-               status_wlan {
-                       function = LED_FUNCTION_WLAN;
-                       color = <LED_COLOR_ID_WHITE>;
-                       gpios = <&tlmm 58 GPIO_ACTIVE_LOW>;
-                       default-state = "keep";
-               };
-
-               error_dlan {
-                       label = "red:dlan";
-                       gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
-                       default-state = "keep";
-               };
-       };
-};
-
-&tlmm {
-       spi_0_pins: spi_0_pinmux {
-               mux {
-                       function = "blsp_spi0";
-                       pins = "gpio55", "gpio56", "gpio57";
-                       drive-strength = <12>;
-                       bias-disable;
-               };
-
-               mux_cs {
-                       function = "gpio";
-                       pins = "gpio54";
-                       drive-strength = <2>;
-                       bias-disable;
-                       output-high;
-               };
-       };
-
-       mdio_pins: mdio_pinmux {
-               mux_1 {
-                       pins = "gpio53";
-                       function = "mdio";
-                       bias-pull-up;
-               };
-               mux_2 {
-                       pins = "gpio52";
-                       function = "mdc";
-                       bias-pull-up;
-               };
-       };
-
-       serial_pins: serial_pinmux {
-               mux {
-                       pins = "gpio61", "gpio60";
-                       function = "blsp_uart0";
-                       bias-disable;
-               };
-       };
-
-       button_pins: button_pinmux {
-               mux {
-                       function = "gpio";
-                       pins = "gpio0", "gpio5";
-                       bias-disable;
-                       input;
-               };
-       };
-};
-
-&cryptobam {
-       status = "okay";
-};
-
-&blsp_dma {
-       status = "okay";
-};
-
-&blsp1_uart1 {
-       pinctrl-0 = <&serial_pins>;
-       pinctrl-names = "default";
-       status = "okay";
-};
-
-&ethphy0 {
-       status = "disabled";
-};
-
-&ethphy1 {
-       status = "disabled";
-};
-
-&wifi0 {
-       status = "okay";
-       qcom,ath10k-calibration-variant = "devolo,magic-2-wifi-next";
-};
-
-&wifi1 {
-       status = "okay";
-       qcom,ath10k-calibration-variant = "devolo,magic-2-wifi-next";
-};
-
-&blsp1_spi1 {
-       pinctrl-0 = <&spi_0_pins>;
-       pinctrl-names = "default";
-       status = "okay";
-       cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
-
-       flash@0 {
-               compatible = "jedec,spi-nor";
-               reg = <0>;
-               linux,modalias = "n25q128a11";
-               spi-max-frequency = <24000000>;
-
-               partitions {
-                       compatible = "fixed-partitions";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       partition@0 {
-                               label = "SBL1";
-                               reg = <0x00000000 0x00040000>;
-                               read-only;
-                       };
-                       partition@40000 {
-                               label = "MIBIB";
-                               reg = <0x00040000 0x00020000>;
-                               read-only;
-                       };
-                       partition@60000 {
-                               label = "QSEE";
-                               reg = <0x00060000 0x00060000>;
-                               read-only;
-                       };
-                       partition@c0000 {
-                               label = "CDT";
-                               reg = <0x000c0000 0x00010000>;
-                               read-only;
-                       };
-                       partition@d0000 {
-                               label = "DDRPARAMS";
-                               reg = <0x000d0000 0x00010000>;
-                               read-only;
-                       };
-                       partition@e0000 {
-                               label = "APPSBLENV"; /* uboot env*/
-                               reg = <0x000e0000 0x00010000>;
-                       };
-                       partition@f0000 {
-                               label = "APPSBL"; /* uboot */
-                               reg = <0x000f0000 0x00080000>;
-                               read-only;
-                       };
-                       partition@170000 {
-                               label = "ART";
-                               reg = <0x00170000 0x00010000>;
-                               read-only;
-                       };
-                       firmware@180000 {
-                               compatible = "denx,fit";
-                               label = "firmware";
-                               reg = <0x00180000 0x01a80000>;
-                       };
-               };
-       };
-};
-
-&gmac {
-       status = "okay";
-};
-
-&switch {
-       status = "okay";
-};
-
-&swport5 {
-       status = "okay";
-       label = "lan1";
-};
-
-&swport3 {
-       status = "okay";
-       label = "lan2";
-};
-
-&swport4 {
-       status = "okay";
-       label = "ghn";
-};