+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include "qcom-ipq4019.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
- memory {
- device_type = "memory";
- reg = <0x80000000 0x10000000>;
- };
-
- aliases {
- serial0 = &blsp1_uart1;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- soc {
- tcsr@1949000 {
- compatible = "qcom,tcsr";
- reg = <0x1949000 0x100>;
- qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
- };
-
- tcsr@194b000 {
- status = "okay";
-
- compatible = "qcom,tcsr";
- reg = <0x194b000 0x100>;
- qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
- };
-
- ess_tcsr@1953000 {
- compatible = "qcom,tcsr";
- reg = <0x1953000 0x1000>;
- qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
- };
-
- tcsr@1957000 {
- compatible = "qcom,tcsr";
- reg = <0x1957000 0x100>;
- qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
- };
-
- keys {
- compatible = "gpio-keys";
-
- reset {
- label = "reset";
- gpios = <&tlmm 4 1>;
- linux,code = <KEY_RESTART>;
- };
- };
- };
-};
-
-&prng {
- status = "okay";
-};
-
-&watchdog {
- status = "okay";
-};
-
-&cryptobam {
- status = "okay";
-};
-
-&crypto {
- status = "okay";
-};
-
-&tlmm {
- serial_pins: serial_pinmux {
- mux {
- pins = "gpio60", "gpio61";
- function = "blsp_uart0";
- bias-disable;
- };
- };
-
- spi_0_pins: spi_0_pinmux {
- pinmux {
- function = "blsp_spi0";
- pins = "gpio55", "gpio56", "gpio57";
- };
- pinmux_cs {
- function = "gpio";
- pins = "gpio54";
- };
- pinconf {
- pins = "gpio55", "gpio56", "gpio57";
- drive-strength = <12>;
- bias-disable;
- };
- pinconf_cs {
- pins = "gpio54";
- drive-strength = <2>;
- bias-disable;
- output-high;
- };
- };
-
- mdio_pins: mdio_pinmux {
- mux_1 {
- pins = "gpio53";
- function = "mdio";
- bias-pull-up;
- };
- mux_2 {
- pins = "gpio52";
- function = "mdc";
- bias-pull-up;
- };
- };
-
- i2c_0_pins: i2c_0_pinmux {
- mux {
- pins = "gpio58", "gpio59";
- function = "blsp_i2c0";
- bias-disable;
- };
- };
-};
-
-&blsp_dma {
- status = "okay";
-};
-
-&blsp1_uart1 {
- pinctrl-0 = <&serial_pins>;
- pinctrl-names = "default";
- status = "okay";
-};
-
-&blsp1_spi1 {
- pinctrl-0 = <&spi_0_pins>;
- pinctrl-names = "default";
- cs-gpios = <&tlmm 54 0>, <&tlmm 63 0>;
- num-cs = <2>;
- status = "okay";
-
- xt25f128b@0 {
- /*
- * Factory U-boot looks in 0:BOOTCONFIG partition for active
- * partitions settings and mangles the partition config so
- * 0:QSEE/0:QSEE_1, 0:CDT/0:CDT_1 and 0:APPSBL/0:APPSBL_1 pairs
- * can be swaped. It isn't a problem but we never can be sure where
- * OFW put factory images. "n25q128a11" is required for proper nor
- * recognition in u-boot.
- */
- compatible = "jedec,spi-nor", "n25q128a11";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0>;
- spi-max-frequency = <24000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "0:SBL1";
- reg = <0x0 0x40000>;
- read-only;
- };
-
- partition@40000 {
- label = "0:MIBIB";
- reg = <0x40000 0x20000>;
- read-only;
- };
-
- partition@60000 {
- label = "0:BOOTCONFIG";
- reg = <0x60000 0x20000>;
- read-only;
- };
-
- partition@80000 {
- label = "0:BOOTCONFIG1";
- reg = <0x80000 0x20000>;
- read-only;
- };
-
- partition@a0000 {
- label = "0:QSEE";
- reg = <0xa0000 0x60000>;
- read-only;
- };
-
- partition@100000 {
- label = "0:QSEE_1";
- reg = <0x100000 0x60000>;
- read-only;
- };
-
- partition@160000 {
- label = "0:CDT";
- reg = <0x160000 0x10000>;
- read-only;
- };
-
- partition@170000 {
- label = "0:CDT_1";
- reg = <0x170000 0x10000>;
- read-only;
- };
-
- partition@180000 {
- label = "0:DDRPARAMS";
- reg = <0x180000 0x10000>;
- read-only;
- };
-
- partition@190000 {
- label = "0:APPSBLENV";
- reg = <0x190000 0x10000>;
- read-only;
- };
-
- partition@1a0000 {
- label = "0:APPSBL";
- reg = <0x1a0000 0xa0000>;
- read-only;
- };
-
- partition@240000 {
- label = "0:APPSBL_1";
- reg = <0x240000 0xa0000>;
- read-only;
- };
-
- partition@2e0000 {
- label = "0:ART";
- reg = <0x2e0000 0x10000>;
- read-only;
- };
-
- config: partition@2f0000 {
- label = "0:CONFIG";
- reg = <0x2f0000 0x10000>;
- read-only;
- };
-
- partition@300000 {
- label = "0:CONFIG_RW";
- reg = <0x300000 0x10000>;
- read-only;
- };
-
- partition@310000 {
- label = "0:EVENTSLOG";
- reg = <0x310000 0x90000>;
- read-only;
- };
- };
- };
-
- xt26g02a@1 {
- /*
- * Factory U-boot looks in 0:BOOTCONFIG partition for active
- * partitions settings and mangles the partition config so
- * rootfs/rootfs_1 pairs can be swaped.
- * It isn't a problem but we never can be sure where OFW put
- * factory images. "spinand,mt29f" value is required for proper
- * nand recognition in u-boot.
- */
- compatible = "spi-nand", "spinand,mt29f";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <1>;
- spi-max-frequency = <24000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "rootfs_1";
- reg = <0x00000000 0x08000000>;
- };
-
- partition@8000000 {
- label = "rootfs";
- reg = <0x08000000 0x08000000>;
- };
- };
- };
-};
-
-&mdio {
- status = "okay";
- pinctrl-0 = <&mdio_pins>;
- pinctrl-names = "default";
- phy-reset-gpio = <&tlmm 62 0>;
-};
-
-&usb3_ss_phy {
- status = "okay";
-};
-
-&usb3_hs_phy {
- status = "okay";
-};
-
-&usb3 {
- status = "okay";
-};
-
-&usb2_hs_phy {
- status = "okay";
-};
-
-&usb2 {
- status = "okay";
-};
projects / openwrt / staging / blocktrron.git / blobdiff