+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0-or-later OR MIT
- *
- * Copyright (c) 2018 Peng Zhang <sd20@qxwlan.com>
- *
- */
-
-#include "qcom-ipq4019-e2600ac.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- model = "Qxwlan E2600AC c1";
- compatible = "qxwlan,e2600ac-c1";
-};
-
-&blsp1_spi1 {
- pinctrl-0 = <&spi_0_pins>;
- pinctrl-names = "default";
- status = "okay";
- cs-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>;
-
- flash@0 {
- reg = <0>;
- compatible = "jedec,spi-nor";
- spi-max-frequency = <24000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "0:SBL1";
- reg = <0x0 0x40000>;
- read-only;
- };
- partition@40000 {
- label = "0:MIBIB";
- reg = <0x40000 0x20000>;
- read-only;
- };
- partition@60000 {
- label = "0:QSEE";
- reg = <0x60000 0x60000>;
- read-only;
- };
- partition@c0000 {
- label = "0:CDT";
- reg = <0xc0000 0x10000>;
- read-only;
- };
- partition@d0000 {
- label = "0:DDRPARAMS";
- reg = <0xd0000 0x10000>;
- read-only;
- };
- partition@e0000 {
- label = "0:APPSBLENV";
- reg = <0xe0000 0x10000>;
- read-only;
- };
- partition@f0000 {
- label = "0:APPSBL";
- reg = <0xf0000 0x80000>;
- read-only;
- };
- partition@170000 {
- label = "0:ART";
- reg = <0x170000 0x10000>;
- read-only;
-
- nvmem-layout {
- compatible = "fixed-layout";
- #address-cells = <1>;
- #size-cells = <1>;
-
- macaddr_gmac0: macaddr@0 {
- reg = <0x0 0x6>;
- };
-
- macaddr_gmac1: macaddr@6 {
- reg = <0x6 0x6>;
- };
-
- precal_art_1000: precal@1000 {
- reg = <0x1000 0x2f20>;
- };
-
- precal_art_5000: precal@5000 {
- reg = <0x5000 0x2f20>;
- };
- };
- };
- partition@180000 {
- compatible = "denx,fit";
- label = "firmware";
- reg = <0x180000 0x1e80000>;
- };
- };
- };
-};
-
-&wifi0 {
- status = "okay";
- nvmem-cell-names = "pre-calibration";
- nvmem-cells = <&precal_art_1000>;
- qcom,ath10k-calibration-variant = "Qxwlan-E2600AC-C1";
-};
-
-&wifi1 {
- status = "okay";
- nvmem-cell-names = "pre-calibration";
- nvmem-cells = <&precal_art_5000>;
- qcom,ath10k-calibration-variant = "Qxwlan-E2600AC-C1";
-};
-
-&gmac {
- status = "okay";
-};
-
-&switch {
- status = "okay";
-};
-
-&swport4 {
- status = "okay";
- label = "sw-eth1";
-
- nvmem-cell-names = "mac-address";
- nvmem-cells = <&macaddr_gmac0>;
-};
-
-&swport5 {
- status = "okay";
-
- label = "sw-eth2";
- nvmem-cell-names = "mac-address";
- nvmem-cells = <&macaddr_gmac1>;
-};