+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-// Copyright (c) 2022, Pawel Dembicki <paweldembicki@gmail.com>.
-// Copyright (c) 2023, Andreas Böhler <dev@aboehler.at>
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/soc/qcom,tcsr.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/leds/common.h>
-
-/ {
- model = "ZTE MF282Plus";
- compatible = "zte,mf282plus";
-
- aliases {
- led-boot = &led_internal;
- led-failsafe = &led_internal;
- led-running = &led_internal;
- led-upgrade = &led_internal;
- };
-
- chosen {
- /*
- * bootargs forced by u-boot bootipq command:
- * 'ubi.mtd=rootfs root=mtd:ubi_rootfs rootfstype=squashfs rootwait'
- */
- bootargs-append = " root=/dev/ubiblock0_1";
- };
-
- gpio_export {
- compatible = "gpio-export";
- #size-cells = <0>;
-
- modem {
- gpio-export,name = "modem-reset";
- gpio-export,output = <0>;
- gpios = <&tlmm 8 GPIO_ACTIVE_HIGH>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_internal: led-0 {
- function = LED_FUNCTION_STATUS;
- color = <LED_COLOR_ID_BLUE>;
- gpios = <&tlmm 10 GPIO_ACTIVE_LOW>;
- label = "blue:internal_led";
- default-state = "keep";
- };
-
- led-1 {
- function = LED_FUNCTION_WLAN;
- color = <LED_COLOR_ID_BLUE>;
- gpios = <&tlmm 61 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "phy0tpt";
- };
- };
-
- keys {
- compatible = "gpio-keys";
-
- wifi {
- label = "wifi";
- linux,code = <KEY_RFKILL>;
- gpios = <&tlmm 11 GPIO_ACTIVE_LOW>;
- };
-
- reset {
- label = "reset";
- linux,code = <KEY_RESTART>;
- gpios = <&tlmm 18 GPIO_ACTIVE_LOW>;
- };
-
- wps {
- label = "wps";
- linux,code = <KEY_WPS_BUTTON>;
- gpios = <&tlmm 68 GPIO_ACTIVE_LOW>;
- };
- };
-
- soc {
- rng@22000 {
- status = "okay";
- };
-
- mdio@90000 {
- status = "okay";
- pinctrl-0 = <&mdio_pins>;
- pinctrl-names = "default";
- reset-gpios = <&tlmm 47 GPIO_ACTIVE_LOW>;
- reset-delay-us = <2000>;
- };
-
- tcsr@1949000 {
- compatible = "qcom,tcsr";
- reg = <0x1949000 0x100>;
- qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
- };
-
- tcsr@194b000 {
- /* select hostmode */
- compatible = "qcom,tcsr";
- reg = <0x194b000 0x100>;
- qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
- status = "okay";
- };
-
- ess_tcsr@1953000 {
- compatible = "qcom,tcsr";
- reg = <0x1953000 0x1000>;
- qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
- };
-
- tcsr@1957000 {
- compatible = "qcom,tcsr";
- reg = <0x1957000 0x100>;
- qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
- };
-
- usb2@60f8800 {
- status = "okay";
- };
-
- usb3@8af8800 {
- status = "okay";
- };
-
- crypto@8e3a000 {
- status = "okay";
- };
-
- watchdog@b017000 {
- status = "okay";
- };
- };
-};
-
-&blsp_dma {
- status = "okay";
-};
-
-&blsp1_spi1 {
- pinctrl-0 = <&spi_0_pins>;
- pinctrl-names = "default";
- status = "okay";
- cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
-
- flash@0 {
- /* u-boot is looking for "n25q128a11" property */
- compatible = "jedec,spi-nor", "n25q128a11";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0>;
- spi-max-frequency = <24000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "0:SBL1";
- reg = <0x0 0x40000>;
- read-only;
- };
-
- partition@40000 {
- label = "0:MIBIB";
- reg = <0x40000 0x20000>;
- read-only;
- };
-
- partition@60000 {
- label = "0:QSEE";
- reg = <0x60000 0x60000>;
- read-only;
- };
-
- partition@c0000 {
- label = "0:CDT";
- reg = <0xc0000 0x10000>;
- read-only;
- };
-
- partition@d0000 {
- label = "0:DDRPARAMS";
- reg = <0xd0000 0x10000>;
- read-only;
- };
-
- partition@e0000 {
- label = "0:APPSBLENV";
- reg = <0xe0000 0x10000>;
- read-only;
- };
-
- partition@f0000 {
- label = "0:APPSBL";
- reg = <0xf0000 0xc0000>;
- read-only;
- };
-
- partition@1b0000 {
- label = "0:reserved1";
- reg = <0x1b0000 0x50000>;
- read-only;
- };
- };
- };
-};
-
-&blsp1_uart1 {
- pinctrl-0 = <&serial_pins>;
- pinctrl-names = "default";
- status = "okay";
-};
-
-&cryptobam {
- status = "okay";
-};
-
-&gmac {
- status = "okay";
- nvmem-cell-names = "mac-address";
- nvmem-cells = <&macaddr_config_0 0>;
-};
-
-&nand {
- pinctrl-0 = <&nand_pins>;
- pinctrl-names = "default";
- status = "okay";
-
- nand@0 {
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "fota-flag";
- reg = <0x0 0xa0000>;
- read-only;
- };
-
- partition@a0000 {
- label = "ART";
- reg = <0xa0000 0x80000>;
- read-only;
-
- nvmem-layout {
- compatible = "fixed-layout";
- #address-cells = <1>;
- #size-cells = <1>;
-
- precal_art_1000: precal@1000 {
- reg = <0x1000 0x2f20>;
- };
-
- precal_art_5000: precal@5000 {
- reg = <0x5000 0x2f20>;
- };
- };
- };
-
- partition@120000 {
- label = "mac";
- reg = <0x120000 0x80000>;
- read-only;
-
- nvmem-layout {
- compatible = "fixed-layout";
- #address-cells = <1>;
- #size-cells = <1>;
-
- macaddr_config_0: macaddr@0 {
- compatible = "mac-base";
- reg = <0x0 0x6>;
- #nvmem-cell-cells = <1>;
- };
- };
- };
-
- partition@1a0000 {
- label = "reserved2";
- reg = <0x1a0000 0xc0000>;
- read-only;
- };
-
- partition@260000 {
- label = "cfg-param";
- reg = <0x260000 0x400000>;
- read-only;
- };
-
- partition@660000 {
- label = "log";
- reg = <0x660000 0x400000>;
- };
-
- partition@a60000 {
- label = "oops";
- reg = <0xa60000 0xa0000>;
- };
-
- partition@b00000 {
- label = "reserved3";
- reg = <0xb00000 0x500000>;
- read-only;
- };
-
- partition@1000000 {
- label = "web";
- reg = <0x1000000 0x800000>;
- };
-
- partition@1800000 {
- label = "rootfs";
- reg = <0x1800000 0x1d00000>;
- };
-
- partition@3500000 {
- label = "data";
- reg = <0x3500000 0x1900000>;
- };
-
- partition@4e00000 {
- label = "fota";
- reg = <0x4e00000 0x2800000>;
- };
-
- partition@7600000 {
- label = "extra-cfg";
- reg = <0x7600000 0xa00000>;
- };
- };
- };
-};
-
-&qpic_bam {
- status = "okay";
-};
-
-&switch {
- status = "okay";
-};
-
-&swport4 {
- status = "okay";
-
- label = "lan";
-};
-
-&tlmm {
- i2c_0_pins: i2c_0_pinmux {
- mux {
- pins = "gpio20", "gpio21";
- function = "blsp_i2c0";
- bias-disable;
- };
- };
-
- mdio_pins: mdio_pinmux {
- mux_1 {
- pins = "gpio6";
- function = "mdio";
- bias-pull-up;
- };
-
- mux_2 {
- pins = "gpio7";
- function = "mdc";
- bias-pull-up;
- };
- };
-
- nand_pins: nand_pins {
- pullups {
- pins = "gpio52", "gpio53", "gpio58",
- "gpio59";
- function = "qpic";
- bias-pull-up;
- };
-
- pulldowns {
- pins = "gpio54", "gpio55", "gpio56",
- "gpio57", "gpio60",
- "gpio62", "gpio63", "gpio64",
- "gpio65", "gpio66", "gpio67",
- "gpio69";
- function = "qpic";
- bias-pull-down;
- };
- };
-
- serial_pins: serial_pinmux {
- mux {
- pins = "gpio16", "gpio17";
- function = "blsp_uart0";
- bias-disable;
- };
- };
-
- spi_0_pins: spi_0_pinmux {
- pinmux {
- function = "blsp_spi0";
- pins = "gpio13", "gpio14", "gpio15";
- drive-strength = <12>;
- bias-disable;
- };
-
- pinmux_cs {
- function = "gpio";
- pins = "gpio12";
- drive-strength = <2>;
- bias-disable;
- output-high;
- };
- };
-};
-
-&usb2_hs_phy {
- status = "okay";
-};
-
-&usb3_ss_phy {
- status = "okay";
-};
-
-&usb3_hs_phy {
- status = "okay";
-};
-
-/*
- * The MD5 sum of the board file of the MF286D is identical to the board
- * file in the OEM firmware
- */
-&wifi0 {
- status = "okay";
- nvmem-cell-names = "pre-calibration", "mac-address";
- nvmem-cells = <&precal_art_1000>, <&macaddr_config_0 1>;
- qcom,ath10k-calibration-variant = "zte,mf286d";
-};
-
-/*
- * The MD5 sum of the board file of the MF286D is identical to the board
- * file in the OEM firmware
- */
-&wifi1 {
- status = "okay";
- nvmem-cell-names = "pre-calibration", "mac-address";
- nvmem-cells = <&precal_art_5000>, <&macaddr_config_0 1>;
- qcom,ath10k-calibration-variant = "zte,mf286d";
-};
projects / openwrt / staging / blocktrron.git / blobdiff