// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-#include <dt-bindings/leds/common.h>
+#include "qcom-ipq4019-whw03.dtsi"
/ {
model = "Linksys WHW03 V2 (Velop)";
compatible = "linksys,whw03v2", "qcom,ipq4019";
- aliases {
- led-boot = &led_blue;
- led-failsafe = &led_red;
- led-running = &led_blue;
- led-upgrade = &led_red;
- };
-
// Default bootargs include rootfstype=ext4 and need to be overriden.
chosen {
bootargs-append = " root=/dev/ubiblock0_0 rootfstype=squashfs ro";
stdout-path = &blsp1_uart1;
};
-
- soc {
- ess-tcsr@1953000 {
- compatible = "qcom,tcsr";
- reg = <0x1953000 0x1000>;
- qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
- };
-
-
- tcsr@1949000 {
- compatible = "qcom,tcsr";
- reg = <0x1949000 0x100>;
- qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
- };
-
- tcsr@194b000 {
- compatible = "qcom,tcsr";
- reg = <0x194b000 0x100>;
- qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
- };
-
- tcsr@1957000 {
- compatible = "qcom,tcsr";
- reg = <0x1957000 0x100>;
- qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
- };
- };
-
-
- keys {
- compatible = "gpio-keys";
-
- reset {
- label = "reset";
- gpios = <&tlmm 18 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
};
-
&tlmm {
- mdio_pins: mdio-pinmux {
- mux-1 {
- pins = "gpio6";
- function = "mdio";
- bias-pull-up;
- };
-
- mux-2 {
- pins = "gpio7";
- function = "mdc";
- bias-pull-up;
- };
- };
-
i2c_0_pins: i2c-0-pinmux {
pins = "gpio20", "gpio21";
function = "blsp_i2c0";
bias-disable;
};
- serial_0_pins: serial0-pinmux {
- pins = "gpio16", "gpio17";
- function = "blsp_uart0";
- bias-disable;
- };
-
- serial_1_pins: serial1-pinmux {
- pins = "gpio8", "gpio9", "gpio10", "gpio11";
- function = "blsp_uart1";
- bias-disable;
- };
-
spi_0_pins: spi-0-pinmux {
mux {
pins = "gpio13", "gpio14", "gpio15";
output-high;
};
};
+};
- spi_1_pins: spi-1-pinmux {
- mux-1 {
- pins = "gpio44", "gpio46", "gpio47";
- function = "blsp_spi1";
- bias-disable;
- };
-
- mux-2 {
- pins = "gpio31", "gpio45", "gpio49";
- function = "gpio";
- bias-pull-up;
- output-high;
- };
-
- host-interrupt {
- pins = "gpio42";
- function = "gpio";
- input;
- };
- };
-
- wifi_0_pins: wifi0-pinmux {
- pins = "gpio52";
+&spi_1_pins {
+ mux-wake {
+ pins = "gpio31";
function = "gpio";
- drive-strength = <6>;
bias-pull-up;
output-high;
};
-
- zigbee-0 {
- gpio-hog;
- gpios = <29 GPIO_ACTIVE_HIGH>;
- bias-disable;
- output-low;
- };
-
- zigbee-1 {
- gpio-hog;
- gpios = <50 GPIO_ACTIVE_HIGH>;
- bias-disable;
- input;
- };
-
- bluetooth-enable {
- gpio-hog;
- gpios = <32 GPIO_ACTIVE_HIGH>;
- output-high;
- };
};
&mdio {
status = "okay";
pinctrl-0 = <&mdio_pins>;
pinctrl-names = "default";
- phy-reset-gpios = <&tlmm 19 GPIO_ACTIVE_LOW>;
-};
-ðphy0 {
- status = "disabled";
-};
-
-ðphy1 {
- status = "disabled";
-};
-
-ðphy2 {
- status = "disabled";
+ phy-reset-gpios = <&tlmm 19 GPIO_ACTIVE_LOW>;
};
ðphy3 {
reg = <0x1d>;
};
-&watchdog {
- status = "okay";
-};
-
-&prng {
- status = "okay";
-};
-
-&blsp_dma {
- status = "okay";
-};
-
-&cryptobam {
- num-channels = <4>;
- qcom,num-ees = <2>;
-
- status = "okay";
-};
-
-&crypto {
- status = "okay";
-};
-
-&blsp1_uart1 {
- status = "okay";
- pinctrl-0 = <&serial_0_pins>;
- pinctrl-names = "default";
-};
-
-&blsp1_uart2 {
- status = "okay";
- pinctrl-0 = <&serial_1_pins>;
- pinctrl-names = "default";
-
- bluetooth {
- compatible = "csr,8811";
-
- enable-gpios = <&tlmm 32 GPIO_ACTIVE_HIGH>;
- };
-};
-
-&blsp1_spi2 {
- pinctrl-0 = <&spi_1_pins>;
- pinctrl-names = "default";
- status = "okay";
-
- cs-gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>;
-
- zigbee@0 {
- #address-cells = <1>;
- #size-cells = <0>;
-
- compatible = "silabs,em3581";
- reg = <0>;
- spi-max-frequency = <12000000>;
- };
-};
-
-&blsp1_i2c3 {
- pinctrl-0 = <&i2c_0_pins>;
- pinctrl-names = "default";
-
- status = "okay";
-
- // RGB LEDs
- pca9633: led-controller@62 {
- compatible = "nxp,pca9633";
- nxp,hw-blink;
- reg = <0x62>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- led_red: red@0 {
- color = <LED_COLOR_ID_RED>;
- function = LED_FUNCTION_INDICATOR;
- reg = <0>;
- };
-
- led_green: green@1 {
- color = <LED_COLOR_ID_GREEN>;
- function = LED_FUNCTION_INDICATOR;
- reg = <1>;
- };
-
- led_blue: blue@2 {
- color = <LED_COLOR_ID_BLUE>;
- function = LED_FUNCTION_INDICATOR;
- reg = <2>;
- };
- };
-};
-
&usb3_ss_phy {
status = "okay";
};
};
};
-&pcie0 {
- status = "okay";
-
- perst-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
- wake-gpios = <&tlmm 40 GPIO_ACTIVE_LOW>;
- clkreq-gpios = <&tlmm 39 GPIO_ACTIVE_LOW>;
-
- bridge@0,0 {
- reg = <0x00000000 0 0 0 0>;
- #address-cells = <3>;
- #size-cells = <2>;
- ranges;
-
- wifi2: wifi@1,0 {
- compatible = "qcom,ath10k";
- reg = <0x00010000 0 0 0 0>;
- };
- };
-};
-
-&qpic_bam {
- status = "okay";
-};
-
-&gmac {
- status = "okay";
-};
-
-&switch {
- status = "okay";
-};
-
&swport4 {
- status = "okay";
- label = "lan";
-
nvmem-cell-names = "mac-address";
nvmem-cells = <&macaddr_gmac1>;
};
&swport5 {
- status = "okay";
- label = "wan";
-
nvmem-cell-names = "mac-address";
nvmem-cells = <&macaddr_gmac0 0>;
};
&wifi0 {
- pinctrl-0 = <&wifi_0_pins>;
- pinctrl-names = "default";
-
- status = "okay";
-
- qcom,coexist-support = <1>;
- qcom,coexist-gpio-pin = <52>;
-
qcom,ath10k-calibration-variant = "linksys-whw03v2";
nvmem-cell-names = "pre-calibration", "mac-address";
};
&wifi1 {
- status = "okay";
-
- ieee80211-freq-limit = <5170000 5330000>;
qcom,ath10k-calibration-variant = "linksys-whw03v2";
nvmem-cell-names = "pre-calibration", "mac-address";
};
&wifi2 {
- status = "okay";
+ reg = <0x00010000 0 0 0 0>;
- ieee80211-freq-limit = <5490000 5835000>;
qcom,ath10k-calibration-variant = "linksys-whw03v2";
nvmem-cell-names = "pre-calibration", "mac-address";
projects / openwrt / openwrt.git / blobdiff