dd if=$@.new bs=64 count=1 >> $(IMAGE_KERNEL)
endef
+define Build/append-rutx-metadata
+ echo \
+ '{ \
+ "device_code": [".*"], \
+ "hwver": [".*"], \
+ "batch": [".*"], \
+ "serial": [".*"], \
+ "supported_devices":["teltonika,rutx"] \
+ }' | fwtool -I - $@
+endef
+
+define Build/copy-file
+ cat "$(1)" > "$@"
+endef
+
define Build/mkmylofw_32m
$(eval device_id=$(word 1,$(1)))
$(eval revision=$(word 2,$(1)))
@mv $@.new $@
endef
+define Build/qsdk-ipq-app-gpt
+ cp $@ $@.tmp 2>/dev/null || true
+ ptgen -g -o $@.tmp -a 1 -l 1024 \
+ -t 0x2e -N 0:HLOS -r -p 32M \
+ -t 0x83 -N rootfs -r -p 128M \
+ -N rootfs_data -p 512M
+ cat $@.tmp >> $@
+ rm $@.tmp
+endef
+
define Build/SenaoFW
-$(STAGING_DIR_HOST)/bin/mksenaofw \
-n $(BOARD_NAME) -r $(VENDOR_ID) -p $(1) \
endef
TARGET_DEVICES += asus_map-ac2200
+# WARNING: this is an initramfs image that gets you half of the way there
+# you need to delete the jffs2 ubi volume and sysupgrade to the final image
+# to get a "trx" you can flash via web UI for ac42u/ac58u:
+# - change call Device/FitImageLzma to Device/FitImage
+# - add the following below UIMAGE_NAME
+# UIMAGE_MAGIC := 0x27051956
+# IMAGES += factory.trx
+# IMAGE/factory.trx := copy-file $(KDIR)/tmp/$$(KERNEL_INITRAMFS_IMAGE) | uImage none
+define Device/asus_rt-ac42u
+ $(call Device/FitImageLzma)
+ DEVICE_VENDOR := ASUS
+ DEVICE_MODEL := RT-AC42U
+ DEVICE_ALT0_VENDOR := ASUS
+ DEVICE_ALT0_MODEL := RT-ACRH17
+ SOC := qcom-ipq4019
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ IMAGE_SIZE := 20439364
+ FILESYSTEMS := squashfs
+# RT-AC82U is nowhere to be found online
+# Rather, this device is a/k/a RT-AC42U
+# But we'll go with what the vendor firmware has...
+ UIMAGE_NAME:=$(shell echo -e '\03\01\01\01RT-AC82U')
+ DEVICE_PACKAGES := ath10k-firmware-qca9984-ct ipq-wifi-asus_rt-ac42u kmod-usb-ledtrig-usbport
+endef
+TARGET_DEVICES += asus_rt-ac42u
+
define Device/asus_rt-ac58u
$(call Device/FitImageLzma)
DEVICE_VENDOR := ASUS
DEVICE_MODEL := RT-AC58U
+ DEVICE_ALT0_VENDOR := ASUS
+ DEVICE_ALT0_MODEL := RT-ACRH13
SOC := qcom-ipq4018
BLOCKSIZE := 128k
PAGESIZE := 2048
- DTB_SIZE := 65536
IMAGE_SIZE := 20439364
FILESYSTEMS := squashfs
# Someone - in their infinite wisdom - decided to put the firmware
DEVICE_VENDOR := EZVIZ
DEVICE_MODEL := CS-W3-WD1200G
DEVICE_VARIANT := EUP
- DEVICE_DTS_CONFIG := config@4
IMAGE_SIZE := 14848k
+ KERNEL_SIZE = 6m
SOC := qcom-ipq4018
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | \
append-metadata
DEVICE_PACKAGES := -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers \
ipq-wifi-ezviz_cs-w3-wd1200g-eup
+ DEVICE_COMPAT_VERSION := 2.0
+ DEVICE_COMPAT_MESSAGE := uboot's bootcmd has to be updated (see wiki). \
+ Upgrade via sysupgrade mechanism is not possible.
endef
TARGET_DEVICES += ezviz_cs-w3-wd1200g-eup
endef
TARGET_DEVICES += glinet_gl-b1300
+define Device/glinet_gl-b2200
+ $(call Device/FitzImage)
+ DEVICE_VENDOR := GL.iNet
+ DEVICE_MODEL := GL-B2200
+ SOC := qcom-ipq4019
+ DEVICE_DTS_CONFIG := config@ap.dk04.1-c3
+ KERNEL_INITRAMFS_SUFFIX := -recovery.itb
+ IMAGES := emmc.img.gz sysupgrade.bin
+ IMAGE/emmc.img.gz := qsdk-ipq-app-gpt |\
+ pad-to 1024k | append-kernel |\
+ pad-to 33792k | append-rootfs |\
+ append-metadata | gzip
+ IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
+ DEVICE_PACKAGES := ath10k-firmware-qca9888-ct ipq-wifi-glinet_gl-b2200 \
+ kmod-fs-ext4 kmod-mmc kmod-spi-dev mkf2fs e2fsprogs kmod-fs-f2fs
+endef
+TARGET_DEVICES += glinet_gl-b2200
+
define Device/glinet_gl-s1300
$(call Device/FitzImage)
DEVICE_VENDOR := GL.iNet
endef
TARGET_DEVICES += openmesh_a62
+define Device/p2w_r619ac
+ $(call Device/FitzImage)
+ $(call Device/UbiFit)
+ DEVICE_VENDOR := P&W
+ DEVICE_MODEL := R619AC
+ SOC := qcom-ipq4019
+ DEVICE_DTS_CONFIG := config@10
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ DEVICE_PACKAGES := ipq-wifi-p2w_r619ac
+endef
+
+define Device/p2w_r619ac-64m
+ $(call Device/p2w_r619ac)
+ DEVICE_VARIANT := 64M NAND
+ IMAGES += nand-factory.bin
+ IMAGE/nand-factory.bin := append-ubi | qsdk-ipq-factory-nand
+endef
+TARGET_DEVICES += p2w_r619ac-64m
+
+define Device/p2w_r619ac-128m
+ $(call Device/p2w_r619ac)
+ DEVICE_VARIANT := 128M NAND
+endef
+TARGET_DEVICES += p2w_r619ac-128m
+
define Device/plasmacloud_pa1200
$(call Device/FitImageLzma)
DEVICE_VENDOR := Plasma Cloud
endef
TARGET_DEVICES += qxwlan_e2600ac-c2
+define Device/teltonika_rutx10
+ $(call Device/FitImage)
+ $(call Device/UbiFit)
+ DEVICE_VENDOR := Teltonika
+ DEVICE_MODEL := RUTX10
+ SOC := qcom-ipq4018
+ DEVICE_DTS_CONFIG := config@5
+ KERNEL_INSTALL := 1
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ FILESYSTEMS := squashfs
+ IMAGE/nand-factory.ubi := append-ubi | qsdk-ipq-factory-nand | append-rutx-metadata
+ DEVICE_PACKAGES := ipq-wifi-teltonika_rutx kmod-bluetooth
+endef
+TARGET_DEVICES += teltonika_rutx10
+
+define Device/tel_x1pro
+ $(call Device/FitImage)
+ DEVICE_VENDOR := Telco
+ DEVICE_MODEL := X1 Pro
+ SOC := qcom-ipq4019
+ KERNEL_SIZE := 4096k
+ IMAGE_SIZE := 31232k
+ IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
+ DEVICE_PACKAGES := kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi
+endef
+TARGET_DEVICES += tel_x1pro
+
define Device/unielec_u4019-32m
$(call Device/FitImage)
DEVICE_VENDOR := Unielec
endef
TARGET_DEVICES += unielec_u4019-32m
+define Device/zte_mf286d
+ $(call Device/FitzImage)
+ DEVICE_VENDOR := ZTE
+ DEVICE_MODEL := MF286D
+ SOC := qcom-ipq4019
+ DEVICE_DTS_CONFIG := config@ap.dk04.1-c1
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ KERNEL_IN_UBI := 1
+ DEVICE_PACKAGES := ipq-wifi-zte_mf286d kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi
+endef
+TARGET_DEVICES += zte_mf286d
+
define Device/zyxel_nbg6617
$(call Device/FitImageLzma)
DEVICE_VENDOR := ZyXEL
IMAGE/factory.bin := append-rootfs | pad-rootfs | pad-to 64k | check-size $$$$(ROOTFS_SIZE) | zyxel-ras-image separate-kernel
IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | check-size $$$$(ROOTFS_SIZE) | sysupgrade-tar rootfs=$$$$@ | append-metadata
DEVICE_PACKAGES := kmod-usb-ledtrig-usbport
- DEFAULT := n
endef
TARGET_DEVICES += zyxel_nbg6617
projects / openwrt / staging / chunkeey.git / blobdiff