ipq40xx: 6.1: adapt and refresh patches

[openwrt/staging/dangole.git] / target / linux / ipq40xx / patches-6.1 / 705-net-dsa-add-Qualcomm-IPQ4019-built-in-switch-support.patch

diff --git a/target/linux/ipq40xx/patches-6.1/705-net-dsa-add-Qualcomm-IPQ4019-built-in-switch-support.patch b/target/linux/ipq40xx/patches-6.1/705-net-dsa-add-Qualcomm-IPQ4019-built-in-switch-support.patch
deleted file mode 100644 (file)
index 13b169e..0000000
--- a/target/linux/ipq40xx/patches-6.1/705-net-dsa-add-Qualcomm-IPQ4019-built-in-switch-support.patch
+++ /dev/null
@@ -1,57 +0,0 @@
-From b5f71652b85a85ea53162e9e2b760b84fd0d254f Mon Sep 17 00:00:00 2001
-From: Robert Marko <robert.marko@sartura.hr>
-Date: Mon, 1 Nov 2021 18:10:28 +0100
-Subject: [PATCH] net: dsa: add Qualcomm IPQ4019 built-in switch support
-
-Qualcomm IPQ40xx SoC-s have a variant of QCA8337N switch built-in.
-
-It shares most of the stuff with its external counterpart, however it is
-modified for the SoC.
-Namely, it doesn't have second CPU port (Port 6), so it has 6 ports
-instead of 7.
-It also has no built-in PHY-s but rather requires external PSGMII based
-companion PHY-s (QCA8072 and QCA8075) for which it first needs to carry
-out calibration before using them.
-PSGMII has a SoC built-in PHY that is used to connect to the PHY-s which
-unfortunately requires some magic values as the datasheet doesnt document
-the bits that are being set or the register at all.
-
-Since its built-in it is MMIO like other peripherals and doesn't have its
-own MDIO bus but depends on the SoC provided one.
-
-CPU connection is at Port 0 and it uses some kind of a internal connection
-and no traditional RGMII/SGMII.
-It also doesn't use in-band tagging like other qca8k switches so a shinfo
-based tagger is used.
-
-Signed-off-by: Robert Marko <robert.marko@sartura.hr>
----
- drivers/net/dsa/qca/Kconfig  | 9 +++++++++
- drivers/net/dsa/qca/Makefile | 1 +
- 2 files changed, 10 insertions(+)
-
---- a/drivers/net/dsa/qca/Kconfig
-+++ b/drivers/net/dsa/qca/Kconfig
-@@ -23,3 +23,13 @@ config NET_DSA_QCA8K_LEDS_SUPPORT
-       help
-         This enabled support for LEDs present on the Qualcomm Atheros
-         QCA8K Ethernet switch chips.
-+
-+config NET_DSA_QCA8K_IPQ4019
-+      tristate "Qualcomm Atheros IPQ4019 built-in Ethernet switch support"
-+      depends on HAS_IOMEM && NET_DSA
-+      select NET_DSA_TAG_IPQ4019
-+      select REGMAP
-+      help
-+        This enables support for the Qualcomm Atheros IPQ4019 SoC built-in
-+        Ethernet switch.
-+
---- a/drivers/net/dsa/qca/Makefile
-+++ b/drivers/net/dsa/qca/Makefile
-@@ -1,5 +1,6 @@
- # SPDX-License-Identifier: GPL-2.0-only
- obj-$(CONFIG_NET_DSA_AR9331)  += ar9331.o
-+obj-$(CONFIG_NET_DSA_QCA8K_IPQ4019)   += qca8k-ipq4019.o
- obj-$(CONFIG_NET_DSA_QCA8K)   += qca8k.o
- qca8k-y                       += qca8k-common.o qca8k-8xxx.o
- ifdef CONFIG_NET_DSA_QCA8K_LEDS_SUPPORT