ipq806x: add support for TP-Link Talon AD7200

[openwrt/openwrt.git] / target / linux / ipq806x / base-files / etc / board.d / 02_network

diff --git a/target/linux/ipq806x/base-files/etc/board.d/02_network b/target/linux/ipq806x/base-files/etc/board.d/02_network
index 74223e5b47d3fbeb897b4b1cc672fb6239838f5b..fbf56c5e0ce98e41eb17cacd263922aff7fd0d9e 100755 (executable)
--- a/target/linux/ipq806x/base-files/etc/board.d/02_network
+++ b/target/linux/ipq806x/base-files/etc/board.d/02_network
@@ -12,40 +12,60 @@ board_config_update
 board=$(board_name)
 
 case "$board" in
-avm,fritzbox-4040)
-       ucidef_set_interfaces_lan_wan "eth0" "eth1"
+asrock,g10 |\
+nec,wg2600hp)
        ucidef_add_switch "switch0" \
-               "0u@eth0" "1:lan" "2:lan" "3:lan" "4:lan"
-       ;;
-linksys,ea8500)
-       hw_mac_addr=$(mtd_get_mac_ascii devinfo hw_mac_addr)
-       ucidef_add_switch "switch0" \
-               "0@eth0" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan"
-       ucidef_set_interface_macaddr "lan" "$hw_mac_addr"
-       ucidef_set_interface_macaddr "wan" "$hw_mac_addr"
+               "2:lan" "3:lan" "4:lan" "5:lan" "6@eth1" "1:wan" "0@eth0"
        ;;
+buffalo,wxr-2533dhp |\
+compex,wpq864 |\
 netgear,d7800 |\
 netgear,r7500 |\
 netgear,r7500v2 |\
-netgear,r7800 |\
 qcom,ipq8064-ap148 |\
 tplink,vr2600v)
        ucidef_add_switch "switch0" \
                "1:lan" "2:lan" "3:lan" "4:lan" "6@eth1" "5:wan" "0@eth0"
        ;;
-glinet,gl-b1300 |\
-openmesh,a42)
+edgecore,ecw5410)
        ucidef_set_interfaces_lan_wan "eth1" "eth0"
+       ucidef_set_interface_macaddr "lan" "$(mtd_get_mac_binary "0:ART" 0x6)"
+       ucidef_set_interface_macaddr "wan" "$(mtd_get_mac_binary "0:ART" 0x0)"
        ;;
-qcom,ipq8064-db149)
-       ucidef_set_interface_lan "eth1 eth2 eth3"
+linksys,ea7500-v1)
+       hw_mac_addr=$(mtd_get_mac_ascii devinfo hw_mac_addr)
        ucidef_add_switch "switch0" \
-               "1:lan" "2:lan" "3:lan" "4:lan" "6u@eth1" "5:wan" "0u@eth0"
+               "2:lan:1" "3:lan:2" "4:lan:3" "5:lan:4" "6@eth1" "1:wan" "0@eth0"
+       ucidef_set_interface_macaddr "lan" "$hw_mac_addr"
+       ucidef_set_interface_macaddr "wan" "$hw_mac_addr"
+       ;;
+linksys,ea8500)
+       hw_mac_addr=$(mtd_get_mac_ascii devinfo hw_mac_addr)
+       ucidef_add_switch "switch0" \
+               "1:lan" "2:lan" "3:lan" "4:lan" "6@eth1" "5:wan" "0@eth0"
+       ucidef_set_interface_macaddr "lan" "$hw_mac_addr"
+       ucidef_set_interface_macaddr "wan" "$hw_mac_addr"
+       ;;
+nec,wg2600hp3)
+       ucidef_add_switch "switch0" \
+               "2:lan" "3:lan" "4:lan" "5:lan" "0@eth1" "1:wan" "6@eth0"
        ;;
+netgear,r7800 |\
+tplink,ad7200 |\
 tplink,c2600)
        ucidef_add_switch "switch0" \
                "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "6@eth1" "5:wan" "0@eth0"
        ;;
+qcom,ipq8064-ap161)
+       ucidef_set_interface_lan "eth1 eth2"
+       ucidef_add_switch "switch0" \
+               "0:lan" "1:lan" "2:lan" "3u@eth1" "6:wan" "4u@eth0"
+       ;;
+qcom,ipq8064-db149)
+       ucidef_set_interface_lan "eth1 eth2 eth3"
+       ucidef_add_switch "switch0" \
+               "1:lan" "2:lan" "3:lan" "4:lan" "6u@eth1" "5:wan" "0u@eth0"
+       ;;
 zyxel,nbg6817)
        hw_mac_addr=$(mtd_get_mac_ascii 0:APPSBLENV ethaddr)
        ucidef_add_switch "switch0" \