ipq806x: add support for Buffalo WXR-2533DHP

[openwrt/staging/jogo.git] / target / linux / ipq806x / base-files / lib / upgrade / buffalo.sh

diff --git a/target/linux/ipq806x/base-files/lib/upgrade/buffalo.sh b/target/linux/ipq806x/base-files/lib/upgrade/buffalo.sh
new file mode 100644 (file)
index 0000000..77fa65e
--- /dev/null
+++ b/target/linux/ipq806x/base-files/lib/upgrade/buffalo.sh
@@ -0,0 +1,45 @@
+#!/bin/sh
+# Copyright (C) 2018 OpenWrt.org
+#
+
+. /lib/functions.sh
+
+# The mtd partition 'ubi' and 'rootfs_1' on NAND flash are os-image
+# partitions. These partitions are called as "Bank1/Bank2" in U-Boot
+# on WXR-2533DHP, and they are checked conditions when booting.
+# Then, U-Boot checks kernel and rootfs volumes in ubi, but U-Boot
+# needs "ubi_rootfs" as rootfs volume name. And, U-Boot checks the
+# checksum at the end of rootfs (ubi_rootfs).
+# When U-Boot writes os-image into the Bank, only kernel, rootfs
+# (ubi_rootfs) and rootfs_data (ubi_rootfs_data) volumes are wrote
+# into the Bank. (not full ubi image)
+#
+# == U-Boot Behaviors ==
+# - Bank1/Bank2 images are good, images are different
+#   -> writes os-image to Bank1 from Bank2
+#      (this behavior is used to firmware upgrade in stock firmware)
+# - Bank1 image is broken (or checksum error)
+#   -> writes os-image to Bank1 from Bank2
+# - Bank2 image is broken (or checksum error)
+#   -> writes os-image to Bank2 from Bank1
+# - Bank1/Bank2 images are broken (or checksum error)
+#   -> start tftp
+
+buffalo_upgrade_prepare_ubi() {
+       local ubidev="$( nand_find_ubi ubi )"
+       local mtdnum2="$( find_mtd_index rootfs_1 )"
+
+       if [ ! "$mtdnum2" ]; then
+               echo "cannot find second ubi mtd partition rootfs_1"
+               return 1
+       fi
+
+       local ubidev2="$( nand_find_ubi rootfs_1 )"
+       if [ ! "$ubidev2" ] && [ -n "$mtdnum2" ]; then
+               ubiattach -m "$mtdnum2"
+               ubidev2="$( nand_find_ubi rootfs_1 )"
+       fi
+
+       ubirmvol /dev/$ubidev -N ubi_rootfs_data &> /dev/null || true
+       ubirmvol /dev/$ubidev2 -N kernel &> /dev/null || true
+}