ipq806x: convert ok to okay in dts

[openwrt/staging/chunkeey.git] / target / linux / ipq806x / files-4.19 / arch / arm / boot / dts / qcom-ipq8064-d7800.dts

diff --git a/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-d7800.dts b/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-d7800.dts
index 1760b1968f844c5d204f78a40baa532739532f70..fc7aea0dca5d7a4b01babc4b6921097a62ec1b0a 100644 (file)
--- a/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-d7800.dts
+++ b/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-d7800.dts
@@ -131,9 +131,9 @@
 
                gsbi@16300000 {
                        qcom,mode = <GSBI_PROT_I2C_UART>;
-                       status = "ok";
+                       status = "okay";
                        serial@16340000 {
-                               status = "ok";
+                               status = "okay";
                        };
                        /*
                         * The i2c device on gsbi4 should not be enabled.
@@ -144,53 +144,53 @@
                };
 
                sata-phy@1b400000 {
-                       status = "ok";
+                       status = "okay";
                };
 
                sata@29000000 {
                        ports-implemented = <0x1>;
-                       status = "ok";
+                       status = "okay";
                };
 
                phy@100f8800 {          /* USB3 port 1 HS phy */
-                       status = "ok";
+                       status = "okay";
                };
 
                phy@100f8830 {          /* USB3 port 1 SS phy */
-                       status = "ok";
+                       status = "okay";
                };
 
                phy@110f8800 {          /* USB3 port 0 HS phy */
-                       status = "ok";
+                       status = "okay";
                };
 
                phy@110f8830 {          /* USB3 port 0 SS phy */
-                       status = "ok";
+                       status = "okay";
                };
 
                usb30@0 {
-                       status = "ok";
+                       status = "okay";
 
                        pinctrl-0 = <&usb0_pwr_en_pins>;
                        pinctrl-names = "default";
                };
 
                usb30@1 {
-                       status = "ok";
+                       status = "okay";
 
                        pinctrl-0 = <&usb1_pwr_en_pins>;
                        pinctrl-names = "default";
                };
 
                pcie0: pci@1b500000 {
-                       status = "ok";
+                       status = "okay";
                        reset-gpio = <&qcom_pinmux 3 GPIO_ACTIVE_HIGH>;
                        pinctrl-0 = <&pcie0_pins>;
                        pinctrl-names = "default";
                };
 
                pcie1: pci@1b700000 {
-                       status = "ok";
+                       status = "okay";
                        reset-gpio = <&qcom_pinmux 48 GPIO_ACTIVE_HIGH>;
                        pinctrl-0 = <&pcie1_pins>;
                        pinctrl-names = "default";
@@ -198,7 +198,7 @@
                };
 
                nand@1ac00000 {
-                       status = "ok";
+                       status = "okay";
 
                        pinctrl-0 = <&nand_pins>;
                        pinctrl-names = "default";
@@ -301,7 +301,7 @@
                };
 
                gmac1: ethernet@37200000 {
-                       status = "ok";
+                       status = "okay";
                        phy-mode = "rgmii";
                        phy-handle = <&phy4>;
                        qcom,id = <1>;
@@ -313,7 +313,7 @@
                };
 
                gmac2: ethernet@37400000 {
-                       status = "ok";
+                       status = "okay";
                        phy-mode = "sgmii";
                        qcom,id = <2>;
 
@@ -404,5 +404,5 @@
 };
 
 &adm_dma {
-       status = "ok";
+       status = "okay";
 };