ipq806x: 6.1: copy patches, files and config from 5.15

[openwrt/staging/ansuel.git] / target / linux / ipq806x / files-6.1 / arch / arm / boot / dts / qcom-ipq8064-ap161.dts

diff --git a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-ap161.dts b/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-ap161.dts
new file mode 100644 (file)
index 0000000..02ddbf3
--- /dev/null
+++ b/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-ap161.dts
@@ -0,0 +1,172 @@
+#include "qcom-ipq8064-v1.0.dtsi"
+
+/ {
+       model = "Qualcomm IPQ8064/AP161";
+       compatible = "qcom,ipq8064-ap161", "qcom,ipq8064";
+
+       memory@0 {
+               reg = <0x42000000 0x1e000000>;
+               device_type = "memory";
+       };
+
+       reserved-memory {
+               #address-cells = <1>;
+               #size-cells = <1>;
+               ranges;
+               rsvd@41200000 {
+                       reg = <0x41200000 0x300000>;
+                       no-map;
+               };
+       };
+
+       aliases {
+               mdio-gpio0 = &mdio0;
+       };
+};
+
+&qcom_pinmux {
+       rgmii2_pins: rgmii2-pins {
+               mux {
+                       pins = "gpio27", "gpio28", "gpio29",
+                              "gpio30", "gpio31", "gpio32",
+                              "gpio51", "gpio52", "gpio59",
+                              "gpio60", "gpio61", "gpio62",
+                              "gpio2", "gpio66";
+               };
+       };
+};
+
+&flash {
+       partitions {
+               compatible = "qcom,smem-part";
+       };
+};
+
+&hs_phy_0 {
+       status = "okay";
+};
+
+&ss_phy_0 {
+       status = "okay";
+};
+
+&usb3_0 {
+       status = "okay";
+};
+
+&hs_phy_1 {
+       status = "okay";
+};
+
+&ss_phy_1 {
+       status = "okay";
+};
+
+&usb3_1 {
+       status = "okay";
+};
+
+&pcie0 {
+       status = "okay";
+};
+
+&pcie1 {
+       status = "okay";
+       max-link-speed = <1>;
+};
+
+&pcie2 {
+       status = "okay";
+};
+
+&nand {
+       status = "okay";
+
+       nand@0 {
+               reg = <0>;
+               compatible = "qcom,nandcs";
+
+               nand-ecc-strength = <4>;
+               nand-bus-width = <8>;
+               nand-ecc-step-size = <512>;
+
+               partitions {
+                       compatible = "qcom,smem-part";
+               };
+       };
+};
+
+&mdio0 {
+       status = "okay";
+
+       pinctrl-0 = <&mdio0_pins>;
+       pinctrl-names = "default";
+
+       phy0: ethernet-phy@0 {
+               reg = <0>;
+               qca,ar8327-initvals = <
+                       0x00004 0x7600000   /* PAD0_MODE */
+                       0x00008 0x1000000   /* PAD5_MODE */
+                       0x0000c 0x20080     /* PAD6_MODE */
+                       0x000e4 0x6a545     /* MAC_POWER_SEL */
+                       0x000e0 0xc74164de  /* SGMII_CTRL */
+                       0x0007c 0x4e        /* PORT0_STATUS */
+                       0x00094 0x4e        /* PORT6_STATUS */
+                       >;
+       };
+
+       phy4: ethernet-phy@4 {
+               reg = <4>;
+               qca,phy-rgmii-en;
+               qca,txclk-delay-en;
+               qca,rxclk-delay-en;
+       };
+
+       phy3: ethernet-phy@3 {
+               device_type = "ethernet-phy";
+               reg = <3>;
+       };
+};
+
+&gmac0 {
+       status = "okay";
+       phy-mode = "rgmii";
+       qcom,id = <0>;
+
+       pinctrl-0 = <&rgmii2_pins>;
+       pinctrl-names = "default";
+       mdiobus = <&mdio0>;
+
+       fixed-link {
+               speed = <1000>;
+               full-duplex;
+       };
+};
+
+&gmac1 {
+       status = "okay";
+       phy-mode = "rgmii";
+       qcom,id = <1>;
+       mdiobus = <&mdio0>;
+
+       fixed-link {
+               speed = <1000>;
+               full-duplex;
+       };
+};
+
+&gmac2 {
+       status = "okay";
+       phy-mode = "sgmii";
+       qcom,id = <2>;
+       mdiobus = <&mdio0>;
+
+       fixed-link {
+               speed = <1000>;
+               full-duplex;
+       };
+};
+
+&adm_dma {
+       status = "okay";
+};