ipq806x: drop 6.1 support

[openwrt/staging/blocktrron.git] / target / linux / ipq806x / files-6.1 / arch / arm / boot / dts / qcom-ipq8064-ea7500-v1.dts

diff --git a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-ea7500-v1.dts b/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-ea7500-v1.dts
deleted file mode 100644 (file)
index 2a565cc..0000000
--- a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-ea7500-v1.dts
+++ /dev/null
@@ -1,120 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include <dt-bindings/leds/common.h>
-
-#include "qcom-ipq8064-eax500.dtsi"
-
-/ {
-       model = "Linksys EA7500 V1 WiFi Router";
-       compatible = "linksys,ea7500-v1", "qcom,ipq8064";
-
-       memory@0 {
-               reg = <0x42000000 0xe000000>;
-               device_type = "memory";
-       };
-
-       aliases {
-               led-boot = &led_power;
-               led-failsafe = &led_power;
-               led-running = &led_power;
-               led-upgrade = &led_power;
-       };
-
-       chosen {
-               /* look for root deviceblock nbr in this bootarg */
-               find-rootblock = "ubi.mtd=";
-       };
-
-       keys {
-               compatible = "gpio-keys";
-               pinctrl-0 = <&button_pins>;
-               pinctrl-names = "default";
-
-               reset {
-                       label = "reset";
-                       gpios = <&qcom_pinmux 68 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_RESTART>;
-                       debounce-interval = <60>;
-                       wakeup-source;
-               };
-
-               wps {
-                       label = "wps";
-                       gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_WPS_BUTTON>;
-                       debounce-interval = <60>;
-                       wakeup-source;
-               };
-       };
-
-       leds {
-               compatible = "gpio-leds";
-               pinctrl-0 = <&led_pins>;
-               pinctrl-names = "default";
-
-               led_power: power {
-                       function = LED_FUNCTION_POWER;
-                       color = <LED_COLOR_ID_WHITE>;
-                       gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
-                       default-state = "keep";
-               };
-       };
-};
-
-&qcom_pinmux {
-       button_pins: button_pins {
-               mux {
-                       pins = "gpio65", "gpio68";
-                       function = "gpio";
-                       drive-strength = <2>;
-                       bias-pull-up;
-               };
-       };
-
-       led_pins: led_pins {
-               mux {
-                       pins = "gpio6";
-                       function = "gpio";
-                       drive-strength = <2>;
-                       bias-pull-up;
-               };
-       };
-};
-
-&partitions {
-       partition@5f80000 {
-               label = "sysdiag";
-               reg = <0x5f80000 0x100000>;
-       };
-
-       partition@6080000 {
-               label = "syscfg";
-               reg = <0x6080000 0x1f80000>;
-       };
-};
-
-&mdio0 {
-       switch@10 {
-               ports {
-                       port@1 {
-                               label = "wan";
-                       };
-
-                       port@2 {
-                               label = "lan1";
-                       };
-
-                       port@3 {
-                               label = "lan2";
-                       };
-
-                       port@4 {
-                               label = "lan3";
-                       };
-
-                       port@5 {
-                               label = "lan4";
-                       };
-               };
-       };
-};