ipq806x: split files in 6.1 and 6.6 dedicated directory
[openwrt/openwrt.git] / target / linux / ipq806x / files-6.1 / arch / arm / boot / dts / qcom-ipq8064-fap-421e.dts
diff --git a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-fap-421e.dts b/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-fap-421e.dts
new file mode 100644 (file)
index 0000000..bb66c6c
--- /dev/null
@@ -0,0 +1,413 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qcom-ipq8064-smb208.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+       model = "Fortinet FAP-421E";
+       compatible = "fortinet,fap-421e", "qcom,ipq8064";
+
+       memory@42000000 {
+               device_type = "memory";
+               reg = <0x42000000 0xe000000>;
+       };
+
+       reserved-memory {
+               rsvd@41200000 {
+                       no-map;
+                       reg = <0x41200000 0x300000>;
+               };
+               wifi_dump@44000000 {
+                       no-map;
+                       reg = <0x44000000 0x600000>;
+               };
+       };
+
+       aliases {
+               led-boot = &led_power_yellow;
+               led-failsafe = &led_power_yellow;
+               led-running = &led_power_yellow;
+               led-upgrade = &led_power_yellow;
+               label-mac-device = &gmac0;
+       };
+
+       chosen {
+               bootargs-override = "console=ttyMSM0,9600n8";
+       };
+
+       keys {
+               compatible = "gpio-keys";
+               pinctrl-0 = <&button_pins>;
+               pinctrl-names = "default";
+               
+               reset {
+                       label = "reset";
+                       gpios = <&qcom_pinmux 56 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RESTART>;
+               };
+       };
+
+       leds {
+               compatible = "gpio-leds";
+               pinctrl-0 = <&led_pins>;
+               pinctrl-names = "default";
+
+               eth1-amber {
+                       label = "amber:eth1";
+                       gpios = <&qcom_pinmux 27 GPIO_ACTIVE_LOW>;
+               };
+
+               eth1-yellow {
+                       label = "yellow:eth1";
+                       gpios = <&qcom_pinmux 26 GPIO_ACTIVE_LOW>;
+               };
+
+               eth2-amber {
+                       label = "amber:eth2";
+                       gpios = <&qcom_pinmux 29 GPIO_ACTIVE_LOW>;
+               };
+
+               eth2-yellow {
+                       label = "yellow:eth2";
+                       gpios = <&qcom_pinmux 28 GPIO_ACTIVE_LOW>;
+               };
+
+               power-amber {
+                       function = LED_FUNCTION_POWER;
+                       color = <LED_COLOR_ID_AMBER>;
+                       gpios = <&qcom_pinmux 53 GPIO_ACTIVE_LOW>;
+               };
+
+               led_power_yellow: power-yellow {
+                       function = LED_FUNCTION_POWER;
+                       color = <LED_COLOR_ID_YELLOW>;
+                       gpios = <&qcom_pinmux 58 GPIO_ACTIVE_LOW>;
+               };
+
+               2g-yellow {
+                       label = "yellow:2g";
+                       gpios = <&qcom_pinmux 30 GPIO_ACTIVE_LOW>;
+               };
+
+               5g-yellow {
+                       label = "yellow:5g";
+                       gpios = <&qcom_pinmux 64 GPIO_ACTIVE_LOW>;
+               };
+       };
+};
+
+&qcom_pinmux {
+       button_pins: button_pins {
+               mux {
+                       bias-pull-up;
+                       drive-strength = <2>;
+                       pins = "gpio56";
+               };
+       };
+
+       led_pins: led_pins {
+               mux {
+                       bias-pull-down;
+                       drive-strength = <2>;
+                       function = "gpio";
+                       output-low;
+                       pins = "gpio23";
+               };
+       };
+
+       rgmii2_pins: rgmii2-pins {
+               mux {
+                       bias-disable;
+                       drive-strength = <16>;
+                       function = "rgmii2";
+                       pins = "gpio66";
+               };
+       };
+
+       spi_pins: spi_pins {
+               mux {
+                       pins = "gpio18", "gpio19", "gpio21";
+                       function = "gsbi5";
+                       bias-pull-down;
+               };
+
+               data {
+                       pins = "gpio18", "gpio19";
+                       drive-strength = <10>;
+               };
+
+               cs {
+                       pins = "gpio20";
+                       drive-strength = <10>;
+                       bias-pull-up;
+               };
+
+               clk {
+                       pins = "gpio21";
+                       drive-strength = <12>;
+               };
+       };
+
+       uart0_pins: uart0_pins {
+               mux {
+                       bias-disable;
+                       drive-strength = <12>;
+                       function = "gsbi7";
+                       pins = "gpio6", "gpio7";
+               };
+       };
+       
+       usb_pwr_en_pins: usb_pwr_en_pins {
+               mux {
+                       pins = "gpio22";
+                       function = "gpio";
+                       drive-strength = <12>;
+                       bias-pull-down;
+                       output-low;
+               };
+       };
+};
+
+&gsbi7 {
+       qcom,mode = <GSBI_PROT_I2C_UART>;
+
+       status = "okay";
+};
+
+&gsbi7_serial{
+       pinctrl-0 = <&uart0_pins>;
+       pinctrl-names = "default";
+
+       status = "okay";
+};
+
+&gsbi5 {
+       qcom,mode = <GSBI_PROT_SPI>;
+
+       status = "okay";
+
+       spi@1a280000 {
+               status = "okay";
+
+               pinctrl-0 = <&spi_pins>;
+               pinctrl-names = "default";
+               cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
+
+               flash@0 {
+                       compatible = "jedec,spi-nor";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+                       spi-max-frequency = <50000000>;
+                       reg = <0>;
+                       m25p,fast-read;
+
+                       partition@0 {
+                               label = "SBL1";
+                               reg = <0x0 0x20000>;
+                               read-only;
+                       };
+
+                       partition@20000 {
+                               label = "MIBIB";
+                               reg = <0x20000 0x20000>;
+                               read-only;
+                       };
+
+                       partition@40000 {
+                               label = "SBL2";
+                               reg = <0x40000 0x40000>;
+                               read-only;
+                       };
+
+                       partition@80000 {
+                               label = "SBL3";
+                               reg = <0x80000 0x80000>;
+                               read-only;
+                       };
+
+                       partition@100000 {
+                               label = "DDRCONFIG";
+                               reg = <0x100000 0x10000>;
+                               read-only;
+                       };
+
+                       partition@110000 {
+                               label = "SSD";
+                               reg = <0x110000 0x10000>;
+                               read-only;
+                       };
+
+                       partition@120000 {
+                               label = "TZ";
+                               reg = <0x120000 0x80000>;
+                               read-only;
+                       };
+
+                       partition@1a0000 {
+                               label = "RPM";
+                               reg = <0x1a0000 0x80000>;
+                               read-only;
+                       };
+
+                       partition@220000 {
+                               label = "APPSBL";
+                               reg = <0x220000 0x80000>;
+                               read-only;
+
+                               nvmem-layout {
+                                       compatible = "fixed-layout";
+                                       #address-cells = <1>;
+                                       #size-cells = <1>;
+
+                                       macaddr_appsbl_7ff80: mac-address@7ff80 {
+                                               compatible = "mac-base";
+                                               reg = <0x7ff80 0xc>;
+                                               #nvmem-cell-cells = <1>;
+                                       };
+                               };
+                       };
+
+                       partition@2a0000 {
+                               label = "APPSBLENV";
+                               reg = <0x2a0000 0x40000>;
+                       };
+
+                       partition@2e0000 {
+                               label = "ART";
+                               reg = <0x2e0000 0x40000>;
+                               read-only;
+                       };
+
+                       partition@320000 {
+                               label = "kernel";
+                               reg = <0x320000 0x600000>;
+                       };
+
+                       partition@920000 {
+                               label = "ubi";
+                               reg = <0x920000 0x1400000>;
+                       };
+
+                       partition@1d20000 {
+                               label = "reserved";
+                               reg = <0x1d20000 0x260000>;
+                               read-only;
+                       };
+
+                       partition@1f80000 {
+                               label = "config";
+                               reg = <0x1f80000 0x80000>;
+                               read-only;
+                       };
+               };
+       };
+};
+
+&hs_phy_1 {
+       status = "okay";
+};
+
+&ss_phy_1 {
+       status = "okay";
+};
+
+&usb3_1 {
+       status = "okay";
+
+       pinctrl-0 = <&usb_pwr_en_pins>;
+       pinctrl-names = "default";
+};
+
+&pcie0 {
+       status = "okay";
+
+       bridge@0,0 {
+               reg = <0x00000000 0 0 0 0>;
+               #address-cells = <3>;
+               #size-cells = <2>;
+               ranges;
+
+               wifi@1,0 {
+                       compatible = "pci168c,0040";
+                       reg = <0x00010000 0 0 0 0>;
+
+                       nvmem-cells = <&macaddr_appsbl_7ff80 8>;
+                       nvmem-cell-names = "mac-address";
+               };
+       };
+};
+
+&pcie1 {
+       status = "okay";
+
+       max-link-speed = <1>;
+
+       bridge@0,0 {
+               reg = <0x00000000 0 0 0 0>;
+               #address-cells = <3>;
+               #size-cells = <2>;
+               ranges;
+
+               wifi@1,0 {
+                       compatible = "pci168c,0040";
+                       reg = <0x00010000 0 0 0 0>;
+
+                       nvmem-cells = <&macaddr_appsbl_7ff80 16>;
+                       nvmem-cell-names = "mac-address";
+               };
+       };
+};
+
+&adm_dma {
+       status = "okay";
+};
+
+&mdio0 {
+       status = "okay";
+
+       #address-cells = <0x1>;
+       #size-cells = <0x0>;
+       gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH>,
+                       <&qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
+       pinctrl-0 = <&mdio0_pins>;
+       pinctrl-names = "default";
+
+       phy1: ethernet-phy@1 {
+               reg = <1>;
+       };
+
+       phy2: ethernet-phy@2 {
+               reg = <2>;
+       };
+};
+
+&gmac0 {
+       status = "okay";
+
+       phy-mode = "rgmii";
+       qcom,id = <0>;
+       pinctrl-0 = <&rgmii2_pins>;
+       pinctrl-names = "default";
+       nvmem-cells = <&macaddr_appsbl_7ff80 0>;
+       nvmem-cell-names = "mac-address";
+
+       fixed-link {
+               speed = <1000>;
+               full-duplex;
+       };
+};
+
+&gmac2 {
+       status = "okay";
+
+       phy-mode = "sgmii";
+       qcom,id = <2>;
+       nvmem-cells = <&macaddr_appsbl_7ff80 1>;
+       nvmem-cell-names = "mac-address";
+
+       fixed-link {
+               speed = <1000>;
+               full-duplex;
+       };
+};