+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later
-
-#include "qcom-ipq8065-smb208.dtsi"
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/leds/common.h>
-
-/ {
- model = "Askey RT4230W REV6";
- compatible = "askey,rt4230w-rev6", "qcom,ipq8065", "qcom,ipq8064";
-
- memory@0 {
- reg = <0x42000000 0x3e000000>;
- device_type = "memory";
- };
-
- aliases {
- led-boot = &ledctrl3;
- led-failsafe = &ledctrl1;
- led-running = &ledctrl2;
- led-upgrade = &ledctrl3;
- };
-
- chosen {
- bootargs = "rootfstype=squashfs noinitrd";
- };
-
- keys {
- compatible = "gpio-keys";
- pinctrl-0 = <&button_pins>;
- pinctrl-names = "default";
-
- reset {
- label = "reset";
- gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
-
- wps {
- label = "wps";
- gpios = <&qcom_pinmux 68 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
- pinctrl-0 = <&led_pins>;
- pinctrl-names = "default";
-
- ledctrl1: ledctrl1 {
- label = "ledctrl1";
- gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>;
- };
-
- ledctrl2: ledctrl2 {
- label = "ledctrl2";
- gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
- };
-
- ledctrl3: ledctrl3 {
- label = "ledctrl3";
- gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>;
- };
- };
-};
-
-&qcom_pinmux {
- button_pins: button_pins {
- mux {
- pins = "gpio54", "gpio68";
- function = "gpio";
- drive-strength = <2>;
- bias-pull-up;
- };
- };
-
- led_pins: led_pins {
- mux {
- pins = "gpio22", "gpio23", "gpio24";
- function = "gpio";
- drive-strength = <2>;
- bias-pull-down;
- };
- };
-
- rgmii2_pins: rgmii2-pins {
- mux {
- pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31",
- "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62";
- function = "rgmii2";
- drive-strength = <8>;
- bias-disable;
- };
-
- tx {
- pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32";
- input-disable;
- };
- };
-
- spi_pins: spi_pins {
- cs {
- pins = "gpio20";
- drive-strength = <12>;
- };
- };
-};
-
-&gsbi5 {
- qcom,mode = <GSBI_PROT_SPI>;
- status = "okay";
-
- spi@1a280000 {
- status = "okay";
-
- pinctrl-0 = <&spi_pins>;
- pinctrl-names = "default";
-
- cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
-
- flash@0 {
- compatible = "everspin,mr25h256";
- #address-cells = <1>;
- #size-cells = <1>;
- spi-max-frequency = <40000000>;
- reg = <0>;
- };
- };
-};
-
-&nand {
- status = "okay";
-
- nand@0 {
- reg = <0>;
- compatible = "qcom,nandcs";
-
- nand-ecc-strength = <4>;
- nand-bus-width = <8>;
- nand-ecc-step-size = <512>;
-
- qcom,boot-partitions = <0x0 0x1180000 0x1340000 0x10c0000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "0:SBL1";
- reg = <0x0000000 0x0040000>;
- read-only;
- };
-
- partition@40000 {
- label = "0:MIBIB";
- reg = <0x0040000 0x0140000>;
- read-only;
- };
-
- partition@180000 {
- label = "0:SBL2";
- reg = <0x0180000 0x0140000>;
- read-only;
- };
-
- partition@2c0000 {
- label = "0:SBL3";
- reg = <0x02c0000 0x0280000>;
- read-only;
- };
-
- partition@540000 {
- label = "0:DDRCONFIG";
- reg = <0x0540000 0x0120000>;
- read-only;
- };
-
- partition@660000 {
- label = "0:SSD";
- reg = <0x0660000 0x0120000>;
- read-only;
- };
-
- partition@780000 {
- label = "0:TZ";
- reg = <0x0780000 0x0280000>;
- read-only;
- };
-
- partition@a00000 {
- label = "0:RPM";
- reg = <0x0a00000 0x0280000>;
- read-only;
- };
-
- partition@c80000 {
- label = "0:APPSBL";
- reg = <0x0c80000 0x0500000>;
- read-only;
- };
-
- partition@1180000 {
- label = "0:APPSBLENV";
- reg = <0x1180000 0x0080000>;
- };
-
- partition@1200000 {
- label = "0:ART";
- reg = <0x1200000 0x0140000>;
- read-only;
-
- nvmem-layout {
- compatible = "fixed-layout";
- #address-cells = <1>;
- #size-cells = <1>;
-
- macaddr_ART_0: macaddr@0 {
- reg = <0x0 0x6>;
- };
-
- macaddr_ART_6: macaddr@6 {
- reg = <0x6 0x6>;
- };
-
- precal_ART_1000: precal@1000 {
- reg = <0x1000 0x2f20>;
- };
-
- precal_ART_5000: precal@5000 {
- reg = <0x5000 0x2f20>;
- };
- };
- };
-
- partition@1340000 {
- label = "0:BOOTCONFIG";
- reg = <0x1340000 0x0060000>;
- read-only;
- };
-
- partition@13a0000 {
- label = "0:SBL2_1";
- reg = <0x13a0000 0x0140000>;
- read-only;
- };
-
- partition@14e0000 {
- label = "0:SBL3_1";
- reg = <0x14e0000 0x0280000>;
- read-only;
- };
-
- partition@1760000 {
- label = "0:DDRCONFIG_1";
- reg = <0x1760000 0x0120000>;
- read-only;
- };
-
- partition@1880000 {
- label = "0:SSD_1";
- reg = <0x1880000 0x0120000>;
- read-only;
- };
-
- partition@19a0000 {
- label = "0:TZ_1";
- reg = <0x19a0000 0x0280000>;
- read-only;
- };
-
- partition@1c20000 {
- label = "0:RPM_1";
- reg = <0x1c20000 0x0280000>;
- read-only;
- };
-
- partition@1ea0000 {
- label = "0:BOOTCONFIG1";
- reg = <0x1ea0000 0x0060000>;
- read-only;
- };
-
- partition@1f00000 {
- label = "0:APPSBL_1";
- reg = <0x1f00000 0x0500000>;
- read-only;
- };
-
- partition@2400000 {
- label = "ubi";
- reg = <0x2400000 0x1a000000>;
- };
- };
- };
-};
-
-&mdio0 {
- status = "okay";
-
- pinctrl-0 = <&mdio0_pins>;
- pinctrl-names = "default";
-
- switch@10 {
- compatible = "qca,qca8337";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x10>;
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
- label = "cpu";
- ethernet = <&gmac0>;
- phy-mode = "rgmii";
- tx-internal-delay-ps = <1000>;
- rx-internal-delay-ps = <1000>;
-
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
- };
-
- port@1 {
- reg = <1>;
- label = "wan";
- phy-mode = "internal";
- phy-handle = <&phy_port1>;
-
- leds {
- #address-cells = <1>;
- #size-cells = <0>;
-
- led@0 {
- reg = <0>;
- color = <LED_COLOR_ID_GREEN>;
- function = LED_FUNCTION_WAN;
- default-state = "keep";
- };
-
- led@1 {
- reg = <1>;
- color = <LED_COLOR_ID_AMBER>;
- function = LED_FUNCTION_WAN;
- default-state = "keep";
- };
- };
- };
-
- port@2 {
- reg = <2>;
- label = "lan1";
- phy-mode = "internal";
- phy-handle = <&phy_port2>;
-
- leds {
- #address-cells = <1>;
- #size-cells = <0>;
-
- led@0 {
- reg = <0>;
- color = <LED_COLOR_ID_GREEN>;
- function = LED_FUNCTION_LAN;
- default-state = "keep";
- };
-
- led@1 {
- reg = <1>;
- color = <LED_COLOR_ID_AMBER>;
- function = LED_FUNCTION_LAN;
- default-state = "keep";
- };
- };
- };
-
- port@3 {
- reg = <3>;
- label = "lan2";
- phy-mode = "internal";
- phy-handle = <&phy_port3>;
-
- leds {
- #address-cells = <1>;
- #size-cells = <0>;
-
- led@0 {
- reg = <0>;
- color = <LED_COLOR_ID_GREEN>;
- function = LED_FUNCTION_LAN;
- default-state = "keep";
- };
-
- led@1 {
- reg = <1>;
- color = <LED_COLOR_ID_AMBER>;
- function = LED_FUNCTION_LAN;
- default-state = "keep";
- };
- };
- };
-
- port@4 {
- reg = <4>;
- label = "lan3";
- phy-mode = "internal";
- phy-handle = <&phy_port4>;
-
- leds {
- #address-cells = <1>;
- #size-cells = <0>;
-
- led@0 {
- reg = <0>;
- color = <LED_COLOR_ID_GREEN>;
- function = LED_FUNCTION_LAN;
- default-state = "keep";
- };
-
- led@1 {
- reg = <1>;
- color = <LED_COLOR_ID_AMBER>;
- function = LED_FUNCTION_LAN;
- default-state = "keep";
- };
- };
- };
-
- port@5 {
- reg = <5>;
- label = "lan4";
- phy-mode = "internal";
- phy-handle = <&phy_port5>;
-
- leds {
- #address-cells = <1>;
- #size-cells = <0>;
-
- led@0 {
- reg = <0>;
- color = <LED_COLOR_ID_GREEN>;
- function = LED_FUNCTION_LAN;
- default-state = "keep";
- };
-
- led@1 {
- reg = <1>;
- color = <LED_COLOR_ID_AMBER>;
- function = LED_FUNCTION_LAN;
- default-state = "keep";
- };
- };
- };
-
- port@6 {
- reg = <6>;
- label = "cpu";
- ethernet = <&gmac1>;
- phy-mode = "sgmii";
- qca,sgmii-enable-pll;
-
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
- };
- };
-
- mdio {
- #address-cells = <1>;
- #size-cells = <0>;
-
- phy_port1: phy@0 {
- reg = <0>;
- };
-
- phy_port2: phy@1 {
- reg = <1>;
- };
-
- phy_port3: phy@2 {
- reg = <2>;
- };
-
- phy_port4: phy@3 {
- reg = <3>;
- };
-
- phy_port5: phy@4 {
- reg = <4>;
- };
- };
- };
-};
-
-&gmac0 {
- status = "okay";
- phy-mode = "rgmii";
- qcom,id = <0>;
-
- nvmem-cells = <&macaddr_ART_0>;
- nvmem-cell-names = "mac-address";
-
- pinctrl-0 = <&rgmii2_pins>;
- pinctrl-names = "default";
-
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
-};
-
-&gmac1 {
- status = "okay";
- phy-mode = "sgmii";
- qcom,id = <1>;
-
- nvmem-cells = <&macaddr_ART_6>;
- nvmem-cell-names = "mac-address";
-
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
-};
-
-&adm_dma {
- status = "okay";
-};
-
-&hs_phy_0 {
- status = "okay";
-};
-
-&ss_phy_0 {
- status = "okay";
-};
-
-&usb3_0 {
- status = "okay";
-};
-
-&hs_phy_1 {
- status = "okay";
-};
-
-&ss_phy_1 {
- status = "okay";
-};
-
-&usb3_1 {
- status = "okay";
-};
-
-&pcie0 {
- status = "okay";
- reset-gpios = <&qcom_pinmux 3 GPIO_ACTIVE_HIGH>;
- pinctrl-0 = <&pcie0_pins>;
- pinctrl-names = "default";
-
- bridge@0,0 {
- reg = <0x00000000 0 0 0 0>;
- #address-cells = <3>;
- #size-cells = <2>;
- ranges;
-
- wifi0: wifi@1,0 {
- compatible = "pci168c,0046";
- reg = <0x00010000 0 0 0 0>;
-
- nvmem-cells = <&precal_ART_1000>;
- nvmem-cell-names = "pre-calibration";
- };
- };
-};
-
-&pcie1 {
- status = "okay";
- reset-gpios = <&qcom_pinmux 48 GPIO_ACTIVE_HIGH>;
- pinctrl-0 = <&pcie1_pins>;
- pinctrl-names = "default";
- max-link-speed = <1>;
-
- bridge@0,0 {
- reg = <0x00000000 0 0 0 0>;
- #address-cells = <3>;
- #size-cells = <2>;
- ranges;
-
- wifi1: wifi@1,0 {
- compatible = "pci168c,0046";
- reg = <0x00010000 0 0 0 0>;
-
- nvmem-cells = <&precal_ART_5000>;
- nvmem-cell-names = "pre-calibration";
- };
- };
-};
projects / openwrt / openwrt.git / blobdiff