ipq806x: drop 6.1 support

[openwrt/staging/blocktrron.git] / target / linux / ipq806x / files-6.1 / arch / arm / boot / dts / qcom-ipq8068-cryptid-common.dtsi

diff --git a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8068-cryptid-common.dtsi b/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8068-cryptid-common.dtsi
deleted file mode 100644 (file)
index a8f4359..0000000
--- a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8068-cryptid-common.dtsi
+++ /dev/null
@@ -1,236 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0 OR MIT
-
-#include "qcom-ipq8064-v2.0-smb208.dtsi"
-
-/ {
-       memory {
-               device_type = "memory";
-               linux,usable-memory = <0x41500000 0x1ea00000>;
-               reg = <0x40000000 0x20000000>;
-       };
-
-       cpus {
-               idle-states {
-                       CPU_SPC: spc {
-                               status = "disabled";
-                       };
-               };
-       };
-
-       chosen {
-               bootargs-append = " console=ttyMSM0,115200n8 ubi.mtd=ubi ubi.mtd=art";
-       };
-};
-
-&qcom_pinmux {
-       mdio0_pins_active: mdio0_pins_active {
-               mux {
-                       pins = "gpio0", "gpio1";
-                       function = "mdio";
-                       drive-strength = <2>;
-                       bias-pull-down;
-                       output-low;
-               };
-
-               clk {
-                       pins = "gpio1";
-                       input-disable;
-               };
-       };
-
-       phy_active: phy_active {
-               phy {
-                       pins = "gpio6", "gpio7";
-                       function = "gpio";
-                       drive-strength = <2>;
-                       bias-pull-down;
-                       output-high;
-               };
-       };
-
-       uart1_pins: uart1_pins {
-               mux {
-                       pins = "gpio51", "gpio52";
-                       function = "gsbi1";
-                       drive-strength = <4>;
-                       bias-disable;
-               };
-       };
-};
-
-&gsbi1 {
-       status = "okay";
-       qcom,mode = <GSBI_PROT_UART_W_FC>;
-
-       serial@12450000 {
-               status = "okay";
-
-               pinctrl-0 = <&uart1_pins>;
-               pinctrl-names = "default";
-       };
-};
-
-&pcie0 {
-       status = "okay";
-
-       /delete-property/ pinctrl-0;
-       /delete-property/ pinctrl-names;
-       /delete-property/ perst-gpios;
-
-       bridge@0,0 {
-               reg = <0x0 0 0 0 0>;
-               #address-cells = <3>;
-               #size-cells = <2>;
-               ranges;
-
-               wifi0: wifi@1,0 {
-                       compatible = "qcom,ath10k";
-                       status = "okay";
-                       reg = <0x10000 0 0 0 0>;
-               };
-       };
-};
-
-&pcie1 {
-       status = "okay";
-
-       /delete-property/ pinctrl-0;
-       /delete-property/ pinctrl-names;
-       /delete-property/ perst-gpios;
-
-       bridge@0,0 {
-               reg = <0x0 0 0 0 0>;
-               #address-cells = <3>;
-               #size-cells = <2>;
-               ranges;
-
-               wifi1: wifi@1,0 {
-                       compatible = "qcom,ath10k";
-                       status = "okay";
-                       reg = <0x10000 0 0 0 0>;
-               };
-       };
-};
-
-&pcie2 {
-       status = "okay";
-
-       /delete-property/ pinctrl-0;
-       /delete-property/ pinctrl-names;
-       /delete-property/ perst-gpios;
-
-       bridge@0,0 {
-               reg = <0x0 0 0 0 0>;
-               #address-cells = <3>;
-               #size-cells = <2>;
-               ranges;
-
-               wifi2: wifi@1,0 {
-                       compatible = "qcom,ath10k";
-                       status = "okay";
-                       reg = <0x10000 0 0 0 0>;
-               };
-       };
-};
-
-&adm_dma {
-       status = "okay";
-};
-
-&nand {
-       status = "okay";
-
-       nand@0 {
-               compatible = "qcom,nandcs";
-
-               reg = <0>;
-
-               nand-ecc-strength = <4>;
-               nand-bus-width = <8>;
-               nand-ecc-step-size = <512>;
-
-               nand-is-boot-medium;
-               qcom,boot-partitions = <0x0 0x2140000>;
-
-               partitions {
-                       compatible = "fixed-partitions";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       partition@0 {
-                               label = "sbl1";
-                               reg = <0x0 0x40000>;
-                               read-only;
-                       };
-
-                       partition@40000 {
-                               label = "mibib";
-                               reg = <0x40000 0x140000>;
-                               read-only;
-                       };
-
-                       partition@180000 {
-                               label = "sbl2";
-                               reg = <0x180000 0x140000>;
-                               read-only;
-                       };
-
-                       partition@2c0000 {
-                               label = "sbl3";
-                               reg = <0x2c0000 0x280000>;
-                               read-only;
-                       };
-
-                       partition@540000 {
-                               label = "ddrconfig";
-                               reg = <0x540000 0x120000>;
-                               read-only;
-                       };
-
-                       partition@660000 {
-                               label = "ssd";
-                               reg = <0x660000 0x120000>;
-                               read-only;
-                       };
-
-                       partition@780000 {
-                               label = "tz";
-                               reg = <0x780000 0x280000>;
-                               read-only;
-                       };
-
-                       partition@a00000 {
-                               label = "rpm";
-                               reg = <0xa00000 0x280000>;
-                               read-only;
-                       };
-
-                       partition@1fc0000 {
-                               label = "u-boot";
-                               reg = <0x1fc0000 0x180000>;
-                               read-only;
-                       };
-
-                       partition@21c0000 {
-                               label = "bootkernel1";
-                               reg = <0x21c0000 0xa80000>;
-                       };
-
-                       partition@2c40000 {
-                               label = "bootkernel2";
-                               reg = <0x2c40000 0xa80000>;
-                       };
-
-                       partition@36c0000 {
-                               label = "ubi";
-                               reg = <0x36c0000 0x46c0000>;
-                       };
-
-                       partition@7d80000 {
-                               label = "art";
-                               reg = <0x7d80000 0x200000>;
-                               read-only;
-                       };
-               };
-       };
-};