ipq806x: 6.1: copy patches, files and config from 5.15

[openwrt/staging/ansuel.git] / target / linux / ipq806x / files-6.1 / arch / arm / boot / dts / qcom-ipq8068-cryptid-common.dtsi

diff --git a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8068-cryptid-common.dtsi b/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8068-cryptid-common.dtsi
new file mode 100644 (file)
index 0000000..a8f4359
--- /dev/null
+++ b/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8068-cryptid-common.dtsi
@@ -0,0 +1,236 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+
+#include "qcom-ipq8064-v2.0-smb208.dtsi"
+
+/ {
+       memory {
+               device_type = "memory";
+               linux,usable-memory = <0x41500000 0x1ea00000>;
+               reg = <0x40000000 0x20000000>;
+       };
+
+       cpus {
+               idle-states {
+                       CPU_SPC: spc {
+                               status = "disabled";
+                       };
+               };
+       };
+
+       chosen {
+               bootargs-append = " console=ttyMSM0,115200n8 ubi.mtd=ubi ubi.mtd=art";
+       };
+};
+
+&qcom_pinmux {
+       mdio0_pins_active: mdio0_pins_active {
+               mux {
+                       pins = "gpio0", "gpio1";
+                       function = "mdio";
+                       drive-strength = <2>;
+                       bias-pull-down;
+                       output-low;
+               };
+
+               clk {
+                       pins = "gpio1";
+                       input-disable;
+               };
+       };
+
+       phy_active: phy_active {
+               phy {
+                       pins = "gpio6", "gpio7";
+                       function = "gpio";
+                       drive-strength = <2>;
+                       bias-pull-down;
+                       output-high;
+               };
+       };
+
+       uart1_pins: uart1_pins {
+               mux {
+                       pins = "gpio51", "gpio52";
+                       function = "gsbi1";
+                       drive-strength = <4>;
+                       bias-disable;
+               };
+       };
+};
+
+&gsbi1 {
+       status = "okay";
+       qcom,mode = <GSBI_PROT_UART_W_FC>;
+
+       serial@12450000 {
+               status = "okay";
+
+               pinctrl-0 = <&uart1_pins>;
+               pinctrl-names = "default";
+       };
+};
+
+&pcie0 {
+       status = "okay";
+
+       /delete-property/ pinctrl-0;
+       /delete-property/ pinctrl-names;
+       /delete-property/ perst-gpios;
+
+       bridge@0,0 {
+               reg = <0x0 0 0 0 0>;
+               #address-cells = <3>;
+               #size-cells = <2>;
+               ranges;
+
+               wifi0: wifi@1,0 {
+                       compatible = "qcom,ath10k";
+                       status = "okay";
+                       reg = <0x10000 0 0 0 0>;
+               };
+       };
+};
+
+&pcie1 {
+       status = "okay";
+
+       /delete-property/ pinctrl-0;
+       /delete-property/ pinctrl-names;
+       /delete-property/ perst-gpios;
+
+       bridge@0,0 {
+               reg = <0x0 0 0 0 0>;
+               #address-cells = <3>;
+               #size-cells = <2>;
+               ranges;
+
+               wifi1: wifi@1,0 {
+                       compatible = "qcom,ath10k";
+                       status = "okay";
+                       reg = <0x10000 0 0 0 0>;
+               };
+       };
+};
+
+&pcie2 {
+       status = "okay";
+
+       /delete-property/ pinctrl-0;
+       /delete-property/ pinctrl-names;
+       /delete-property/ perst-gpios;
+
+       bridge@0,0 {
+               reg = <0x0 0 0 0 0>;
+               #address-cells = <3>;
+               #size-cells = <2>;
+               ranges;
+
+               wifi2: wifi@1,0 {
+                       compatible = "qcom,ath10k";
+                       status = "okay";
+                       reg = <0x10000 0 0 0 0>;
+               };
+       };
+};
+
+&adm_dma {
+       status = "okay";
+};
+
+&nand {
+       status = "okay";
+
+       nand@0 {
+               compatible = "qcom,nandcs";
+
+               reg = <0>;
+
+               nand-ecc-strength = <4>;
+               nand-bus-width = <8>;
+               nand-ecc-step-size = <512>;
+
+               nand-is-boot-medium;
+               qcom,boot-partitions = <0x0 0x2140000>;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "sbl1";
+                               reg = <0x0 0x40000>;
+                               read-only;
+                       };
+
+                       partition@40000 {
+                               label = "mibib";
+                               reg = <0x40000 0x140000>;
+                               read-only;
+                       };
+
+                       partition@180000 {
+                               label = "sbl2";
+                               reg = <0x180000 0x140000>;
+                               read-only;
+                       };
+
+                       partition@2c0000 {
+                               label = "sbl3";
+                               reg = <0x2c0000 0x280000>;
+                               read-only;
+                       };
+
+                       partition@540000 {
+                               label = "ddrconfig";
+                               reg = <0x540000 0x120000>;
+                               read-only;
+                       };
+
+                       partition@660000 {
+                               label = "ssd";
+                               reg = <0x660000 0x120000>;
+                               read-only;
+                       };
+
+                       partition@780000 {
+                               label = "tz";
+                               reg = <0x780000 0x280000>;
+                               read-only;
+                       };
+
+                       partition@a00000 {
+                               label = "rpm";
+                               reg = <0xa00000 0x280000>;
+                               read-only;
+                       };
+
+                       partition@1fc0000 {
+                               label = "u-boot";
+                               reg = <0x1fc0000 0x180000>;
+                               read-only;
+                       };
+
+                       partition@21c0000 {
+                               label = "bootkernel1";
+                               reg = <0x21c0000 0xa80000>;
+                       };
+
+                       partition@2c40000 {
+                               label = "bootkernel2";
+                               reg = <0x2c40000 0xa80000>;
+                       };
+
+                       partition@36c0000 {
+                               label = "ubi";
+                               reg = <0x36c0000 0x46c0000>;
+                       };
+
+                       partition@7d80000 {
+                               label = "art";
+                               reg = <0x7d80000 0x200000>;
+                               read-only;
+                       };
+               };
+       };
+};