ipq806x: split files in 6.1 and 6.6 dedicated directory

[openwrt/staging/ansuel.git] / target / linux / ipq806x / files-6.6 / arch / arm / boot / dts / qcom / qcom-ipq8064-unifi-ac-hd.dts

diff --git a/target/linux/ipq806x/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq8064-unifi-ac-hd.dts b/target/linux/ipq806x/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq8064-unifi-ac-hd.dts
new file mode 100644 (file)
index 0000000..fac4189
--- /dev/null
+++ b/target/linux/ipq806x/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq8064-unifi-ac-hd.dts
@@ -0,0 +1,315 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qcom-ipq8064-v2.0-smb208.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+       model = "Ubiquiti UniFi AC HD";
+       compatible = "ubnt,unifi-ac-hd", "qcom,ipq8064";
+
+       aliases {
+               label-mac-device = &gmac2;
+               led-boot = &led_dome_white;
+               led-failsafe = &led_dome_white;
+               led-running = &led_dome_blue;
+               led-upgrade = &led_dome_blue;
+               mdio-gpio0 = &mdio0;
+               ethernet0 = &gmac2;
+               ethernet1 = &gmac1;
+       };
+
+       leds {
+               compatible = "gpio-leds";
+               pinctrl-0 = <&led_pins>;
+               pinctrl-names = "default";
+
+               led_dome_blue: dome_blue {
+                       label = "blue:dome";
+                       gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
+               };
+
+               led_dome_white: dome_white {
+                       label = "white:dome";
+                       gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
+               };
+       };
+
+       keys {
+               compatible = "gpio-keys";
+               pinctrl-0 = <&button_pins>;
+               pinctrl-names = "default";
+
+               reset {
+                       label = "reset";
+                       gpios = <&qcom_pinmux 68 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RESTART>;
+                       debounce-interval = <60>;
+                       wakeup-source;
+               };
+       };
+};
+
+&qcom_pinmux {
+       button_pins: button_pins {
+               mux {
+                       pins = "gpio68";
+                       function = "gpio";
+                       drive-strength = <2>;
+                       bias-pull-up;
+               };
+       };
+
+       led_pins: led_pins {
+               mux {
+                       pins = "gpio9", "gpio53";
+                       function = "gpio";
+                       drive-strength = <2>;
+                       bias-pull-down;
+                       output-low;
+               };
+       };
+
+       spi_pins: spi_pins {
+               mux {
+                       pins = "gpio18", "gpio19", "gpio21";
+                       function = "gsbi5";
+                       drive-strength = <10>;
+                       bias-none;
+               };
+
+               cs {
+                       pins = "gpio20";
+                       drive-strength = <12>;
+               };
+       };
+};
+
+&CPU_SPC {
+       status = "disabled";
+};
+
+&gsbi5 {
+       status = "okay";
+
+       qcom,mode = <GSBI_PROT_SPI>;
+
+       spi@1a280000 {
+               status = "okay";
+
+               pinctrl-0 = <&spi_pins>;
+               pinctrl-names = "default";
+               cs-gpios = <&qcom_pinmux 20 0>;
+
+               flash@0 {
+                       compatible = "mx25u25635f", "jedec,spi-nor";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+                       spi-max-frequency = <50000000>;
+                       reg = <0>;
+                       m25p,fast-read;
+
+                       partitions {
+                               compatible = "fixed-partitions";
+                               #address-cells = <1>;
+                               #size-cells = <1>;
+
+                               partition@0 {
+                                       label = "SBL1";
+                                       reg = <0x0 0x20000>;
+                                       read-only;
+                               };
+
+                               partition@20000 {
+                                       label = "MIBIB";
+                                       reg = <0x20000 0x10000>;
+                                       read-only;
+                               };
+
+                               partition@30000 {
+                                       label = "SBL2";
+                                       reg = <0x30000 0x20000>;
+                                       read-only;
+                               };
+
+                               partition@50000 {
+                                       label = "SBL3";
+                                       reg = <0x50000 0x30000>;
+                                       read-only;
+                               };
+
+                               partition@80000 {
+                                       label = "DDRCONFIG";
+                                       reg = <0x80000 0x10000>;
+                                       read-only;
+                               };
+
+                               partition@90000 {
+                                       label = "SSD";
+                                       reg = <0x90000 0x10000>;
+                                       read-only;
+                               };
+
+                               partition@a0000 {
+                                       label = "TZ";
+                                       reg = <0xa0000 0x30000>;
+                                       read-only;
+                               };
+
+                               partition@d0000 {
+                                       label = "RPM";
+                                       reg = <0xd0000 0x20000>;
+                                       read-only;
+                               };
+
+                               partition@f0000 {
+                                       label = "APPSBL";
+                                       reg = <0xf0000 0xc0000>;
+                                       read-only;
+                               };
+
+                               partition@1b0000 {
+                                       label = "APPSBLENV";
+                                       reg = <0x1b0000 0x10000>;
+                                       read-only;
+                               };
+
+                               eeprom: partition@1c0000 {
+                                       label = "EEPROM";
+                                       reg = <0x1c0000 0x10000>;
+                                       read-only;
+
+                                       nvmem-layout {
+                                               compatible = "fixed-layout";
+                                               #address-cells = <1>;
+                                               #size-cells = <1>;
+
+                                               macaddr_eeprom_0: macaddr@0 {
+                                                       reg = <0x0 0x6>;
+                                               };
+
+                                               macaddr_eeprom_6: macaddr@6 {
+                                                       reg = <0x6 0x6>;
+                                               };
+                                       };
+                               };
+
+                               partition@1d0000 {
+                                       label = "bootselect";
+                                       reg = <0x1d0000 0x10000>;
+                               };
+
+                               partition@1e0000 {
+                                       compatible = "denx,fit";
+                                       label = "firmware";
+                                       reg = <0x1e0000 0xe70000>;
+                               };
+
+                               partition@1050000 {
+                                       label = "kernel1";
+                                       reg = <0x1050000 0xe70000>;
+                                       read-only;
+                               };
+
+                               partition@1ec0000 {
+                                       label = "debug";
+                                       reg = <0x1ec0000 0x100000>;
+                                       read-only;
+                               };
+
+                               partition@1fc0000 {
+                                       label = "cfg";
+                                       reg = <0x1fc0000 0x40000>;
+                                       read-only;
+                               };
+                       };
+               };
+       };
+};
+
+&adm_dma {
+       status = "okay";
+};
+
+&nand {
+       status = "okay";
+
+       nand-ecc-strength = <4>;
+       nand-bus-width = <8>;
+};
+
+&mdio0 {
+       status = "okay";
+
+       pinctrl-0 = <&mdio0_pins>;
+       pinctrl-names = "default";
+
+       phy4: ethernet-phy@4 {
+               reg = <4>;
+       };
+
+       phy5: ethernet-phy@5 {
+               reg = <5>;
+       };
+};
+
+&gmac1 {
+       status = "okay";
+
+       mdiobus = <&mdio0>;
+       phy-handle = <&phy5>;
+       phy-mode = "sgmii";
+       qcom,id = <1>;
+
+       nvmem-cells = <&macaddr_eeprom_6>;
+       nvmem-cell-names = "mac-address";
+};
+
+&gmac2 {
+       status = "okay";
+
+       mdiobus = <&mdio0>;
+       phy-handle = <&phy4>;
+       phy-mode = "sgmii";
+       qcom,id = <2>;
+
+       nvmem-cells = <&macaddr_eeprom_0>;
+       nvmem-cell-names = "mac-address";
+};
+
+&pcie0 {
+       status = "okay";
+};
+
+&pcie1 {
+       status = "okay";
+};
+
+&tcsr {
+       status = "okay";
+};
+
+&hs_phy_0 {
+       status = "okay";
+};
+
+&ss_phy_0 {
+       status = "okay";
+};
+
+&usb3_0 {
+       status = "okay";
+};
+
+&hs_phy_1 {
+       status = "okay";
+};
+
+&ss_phy_1 {
+       status = "okay";
+};
+
+&usb3_1 {
+       status = "okay";
+};