ipq806x: Add support for linux-4.4

[openwrt/openwrt.git] / target / linux / ipq806x / patches-4.1 / 707-ARM-dts-qcom-add-mdio-nodes-to-ap148-db149.patch

diff --git a/target/linux/ipq806x/patches-4.1/707-ARM-dts-qcom-add-mdio-nodes-to-ap148-db149.patch b/target/linux/ipq806x/patches-4.1/707-ARM-dts-qcom-add-mdio-nodes-to-ap148-db149.patch
deleted file mode 100644 (file)
index 5126e90..0000000
--- a/target/linux/ipq806x/patches-4.1/707-ARM-dts-qcom-add-mdio-nodes-to-ap148-db149.patch
+++ /dev/null
@@ -1,146 +0,0 @@
-From e81de9d28bd0421c236df322872e64edf4ee1852 Mon Sep 17 00:00:00 2001
-From: Mathieu Olivari <mathieu@codeaurora.org>
-Date: Mon, 11 May 2015 16:32:09 -0700
-Subject: [PATCH 7/8] ARM: dts: qcom: add mdio nodes to ap148 & db149
-
-Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
----
- arch/arm/boot/dts/qcom-ipq8064-ap148.dts | 40 ++++++++++++++++++++++++++-
- arch/arm/boot/dts/qcom-ipq8064-db149.dts | 46 ++++++++++++++++++++++++++++++++
- 2 files changed, 85 insertions(+), 1 deletion(-)
-
---- a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
-+++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
-@@ -19,8 +19,9 @@
-               };
-       };
- 
--      alias {
-+      aliases {
-               serial0 = &uart4;
-+              mdio-gpio0 = &mdio0;
-       };
- 
-       chosen {
-@@ -65,6 +66,15 @@
-                                       bias-bus-hold;
-                               };
-                       };
-+
-+                      mdio0_pins: mdio0_pins {
-+                              mux {
-+                                      pins = "gpio0", "gpio1";
-+                                      function = "gpio";
-+                                      drive-strength = <8>;
-+                                      bias-disable;
-+                              };
-+                      };
-               };
- 
-               gsbi@16300000 {
-@@ -135,6 +145,34 @@
- 
-                       linux,part-probe = "qcom-smem";
-               };
-+
-+              mdio0: mdio {
-+                      compatible = "virtual,mdio-gpio";
-+                      #address-cells = <1>;
-+                      #size-cells = <0>;
-+                      gpios = <&qcom_pinmux 1 0 &qcom_pinmux 0 0>;
-+                      pinctrl-0 = <&mdio0_pins>;
-+                      pinctrl-names = "default";
-+
-+                      phy0: ethernet-phy@0 {
-+                              device_type = "ethernet-phy";
-+                              reg = <0>;
-+                              qca,ar8327-initvals = <
-+                                      0x00004 0x7600000   /* PAD0_MODE */
-+                                      0x00008 0x1000000   /* PAD5_MODE */
-+                                      0x0000c 0x80        /* PAD6_MODE */
-+                                      0x000e4 0xaa545     /* MAC_POWER_SEL */
-+                                      0x000e0 0xc74164de  /* SGMII_CTRL */
-+                                      0x0007c 0x4e        /* PORT0_STATUS */
-+                                      0x00094 0x4e        /* PORT6_STATUS */
-+                                      >;
-+                      };
-+
-+                      phy4: ethernet-phy@4 {
-+                              device_type = "ethernet-phy";
-+                              reg = <4>;
-+                      };
-+              };
-       };
- };
- 
---- a/arch/arm/boot/dts/qcom-ipq8064-db149.dts
-+++ b/arch/arm/boot/dts/qcom-ipq8064-db149.dts
-@@ -16,6 +16,7 @@
- 
-       alias {
-               serial0 = &uart2;
-+              mdio-gpio0 = &mdio0;
-       };
- 
-       chosen {
-@@ -38,6 +39,15 @@
-                                       bias-none;
-                               };
-                       };
-+
-+                      mdio0_pins: mdio0_pins {
-+                              mux {
-+                                      pins = "gpio0", "gpio1";
-+                                      function = "gpio";
-+                                      drive-strength = <8>;
-+                                      bias-disable;
-+                              };
-+                      };
-               };
- 
-               gsbi2: gsbi@12480000 {
-@@ -140,5 +150,44 @@
-               pcie2: pci@1b900000 {
-                       status = "ok";
-               };
-+
-+              mdio0: mdio {
-+                      compatible = "virtual,mdio-gpio";
-+                      #address-cells = <1>;
-+                      #size-cells = <0>;
-+                      gpios = <&qcom_pinmux 1 0 &qcom_pinmux 0 0>;
-+
-+                      pinctrl-0 = <&mdio0_pins>;
-+                      pinctrl-names = "default";
-+
-+                      phy0: ethernet-phy@0 {
-+                              device_type = "ethernet-phy";
-+                              reg = <0>;
-+                              qca,ar8327-initvals = <
-+                                      0x00004 0x7600000   /* PAD0_MODE */
-+                                      0x00008 0x1000000   /* PAD5_MODE */
-+                                      0x0000c 0x80        /* PAD6_MODE */
-+                                      0x000e4 0xaa545     /* MAC_POWER_SEL */
-+                                      0x000e0 0xc74164de  /* SGMII_CTRL */
-+                                      0x0007c 0x4e        /* PORT0_STATUS */
-+                                      0x00094 0x4e        /* PORT6_STATUS */
-+                              >;
-+                      };
-+
-+                      phy4: ethernet-phy@4 {
-+                              device_type = "ethernet-phy";
-+                              reg = <4>;
-+                      };
-+
-+                      phy6: ethernet-phy@6 {
-+                              device_type = "ethernet-phy";
-+                              reg = <6>;
-+                      };
-+
-+                      phy7: ethernet-phy@7 {
-+                              device_type = "ethernet-phy";
-+                              reg = <7>;
-+                      };
-+              };
-       };
- };