ipq806x: add v4.9 support

[openwrt/staging/yousong.git] / target / linux / ipq806x / patches-4.9 / 0035-qcom-ipq4019-add-USB-nodes-to-ipq4019-SoC-device-tre.patch

diff --git a/target/linux/ipq806x/patches-4.9/0035-qcom-ipq4019-add-USB-nodes-to-ipq4019-SoC-device-tre.patch b/target/linux/ipq806x/patches-4.9/0035-qcom-ipq4019-add-USB-nodes-to-ipq4019-SoC-device-tre.patch
new file mode 100644 (file)
index 0000000..61768bc
--- /dev/null
+++ b/target/linux/ipq806x/patches-4.9/0035-qcom-ipq4019-add-USB-nodes-to-ipq4019-SoC-device-tre.patch
@@ -0,0 +1,88 @@
+From d2ed553484fecdf02fa53bf431599412348afa95 Mon Sep 17 00:00:00 2001
+From: Matthew McClintock <mmcclint@codeaurora.org>
+Date: Thu, 17 Mar 2016 16:22:28 -0500
+Subject: [PATCH 35/37] qcom: ipq4019: add USB nodes to ipq4019 SoC device
+ tree
+
+This adds the SoC nodes to the ipq4019 device tree
+
+Signed-off-by: Matthew McClintock <mmcclint@codeaurora.org>
+---
+ arch/arm/boot/dts/qcom-ipq4019.dtsi |   67 +++++++++++++++++++++++++++++++++++
+ 1 file changed, 67 insertions(+)
+
+--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
++++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
+@@ -313,5 +313,72 @@
+                       compatible = "qcom,pshold";
+                       reg = <0x4ab000 0x4>;
+               };
++
++                usb3_ss_phy: ssphy@9a000 {
++                        compatible = "qca,uni-ssphy";
++                        reg = <0x9a000 0x800>;
++                        reg-names = "phy_base";
++                        resets = <&gcc USB3_UNIPHY_PHY_ARES>;
++                        reset-names = "por_rst";
++                        status = "disabled";
++                };
++
++                usb3_hs_phy: hsphy@a6000 {
++                        compatible = "qca,baldur-usb3-hsphy";
++                        reg = <0xa6000 0x40>;
++                        reg-names = "phy_base";
++                        resets = <&gcc USB3_HSPHY_POR_ARES>, <&gcc USB3_HSPHY_S_ARES>;
++                        reset-names = "por_rst", "srif_rst";
++                        status = "disabled";
++                };
++
++              usb3@0 {
++                        compatible = "qcom,dwc3";
++                        #address-cells = <1>;
++                        #size-cells = <1>;
++                        clocks = <&gcc GCC_USB3_MASTER_CLK>;
++                      clock-names = "core";
++                        ranges;
++                        status = "disabled";
++
++                        dwc3@8a00000 {
++                                compatible = "snps,dwc3";
++                                reg = <0x8a00000 0xf8000>;
++                                interrupts = <0 132 0>;
++                                usb-phy = <&usb3_hs_phy>, <&usb3_ss_phy>;
++                                phy-names = "usb2-phy", "usb3-phy";
++                                tx-fifo-resize;
++                                dr_mode = "host";
++                        };
++                };
++
++                usb2_hs_phy: hsphy@a8000 {
++                        compatible = "qca,baldur-usb2-hsphy";
++                        reg = <0xa8000 0x40>;
++                        reg-names = "phy_base";
++                        resets = <&gcc USB2_HSPHY_POR_ARES>, <&gcc USB2_HSPHY_S_ARES>;
++                        reset-names = "por_rst", "srif_rst";
++                        status = "disabled";
++                };
++
++                usb2@0 {
++                        compatible = "qcom,dwc3";
++                        #address-cells = <1>;
++                        #size-cells = <1>;
++                        clocks = <&gcc GCC_USB2_MASTER_CLK>;
++                      clock-names = "core";
++                        ranges;
++                        status = "disabled";
++
++                        dwc3@6000000 {
++                                compatible = "snps,dwc3";
++                                reg = <0x6000000 0xf8000>;
++                                interrupts = <0 136 0>;
++                                usb-phy = <&usb2_hs_phy>;
++                                phy-names = "usb2-phy";
++                                tx-fifo-resize;
++                                dr_mode = "host";
++                        };
++                };
+       };
+ };