--- /dev/null
+From ff1ecc5bfc11377e82894d05aa45a92657ef8a06 Mon Sep 17 00:00:00 2001
+From: Matthew McClintock <mmcclint@codeaurora.org>
+Date: Mon, 21 Mar 2016 15:55:21 -0500
+Subject: [PATCH 37/37] dts: ipq4019: Add support for IPQ4019 DK04 board
+
+This is pretty similiar to a DK01 but has a bit more IO. Some notable
+differences are listed below however they are not in the device tree yet
+as we continue adding more support
+
+- second serial port
+- PCIe
+- NAND
+- SD/EMMC
+
+Signed-off-by: Matthew McClintock <mmcclint@codeaurora.org>
+---
+ arch/arm/boot/dts/Makefile | 1 +
+ arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi | 12 +-
+ arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts | 21 +++
+ arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi | 163 +++++++++++++++++++++++
+ 4 files changed, 189 insertions(+), 8 deletions(-)
+ create mode 100644 arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts
+ create mode 100644 arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi
+
+--- a/arch/arm/boot/dts/Makefile
++++ b/arch/arm/boot/dts/Makefile
+@@ -617,6 +617,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \
+ qcom-apq8084-ifc6540.dtb \
+ qcom-apq8084-mtp.dtb \
+ qcom-ipq4019-ap.dk01.1-c1.dtb \
++ qcom-ipq4019-ap.dk04.1-c1.dtb \
+ qcom-ipq8064-ap148.dtb \
+ qcom-msm8660-surf.dtb \
+ qcom-msm8960-cdp.dtb \
+--- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
++++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
+@@ -109,11 +109,7 @@
+ status = "ok";
+ };
+
+- usb3_ss_phy: ssphy@0 {
+- status = "ok";
+- };
+-
+- dummy_ss_phy: ssphy@1 {
++ usb3_ss_phy: ssphy@9a000 {
+ status = "ok";
+ };
+
+@@ -121,15 +117,15 @@
+ status = "ok";
+ };
+
+- usb2_hs_phy: hsphy@a8000 {
++ usb3@0 {
+ status = "ok";
+ };
+
+- usb3: usb3@8a00000 {
++ usb2_hs_phy: hsphy@a8000 {
+ status = "ok";
+ };
+
+- usb2: usb2@6000000 {
++ usb2@0{
+ status = "ok";
+ };
+ };
+--- /dev/null
++++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts
+@@ -0,0 +1,21 @@
++/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
++ *
++ * Permission to use, copy, modify, and/or distribute this software for any
++ * purpose with or without fee is hereby granted, provided that the above
++ * copyright notice and this permission notice appear in all copies.
++ *
++ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
++ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
++ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
++ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
++ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
++ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
++ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
++ *
++ */
++
++#include "qcom-ipq4019-ap.dk04.1.dtsi"
++
++/ {
++ model = "Qualcomm Technologies, Inc. IPQ40xx/AP-DK04.1-C1";
++};
+--- /dev/null
++++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi
+@@ -0,0 +1,163 @@
++/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
++ *
++ * Permission to use, copy, modify, and/or distribute this software for any
++ * purpose with or without fee is hereby granted, provided that the above
++ * copyright notice and this permission notice appear in all copies.
++ *
++ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
++ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
++ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
++ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
++ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
++ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
++ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
++ *
++ */
++
++#include "qcom-ipq4019.dtsi"
++
++/ {
++ model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK04.1";
++ compatible = "qcom,ipq4019";
++
++ clocks {
++ xo: xo {
++ compatible = "fixed-clock";
++ clock-frequency = <48000000>;
++ #clock-cells = <0>;
++ };
++ };
++
++ soc {
++ timer {
++ compatible = "arm,armv7-timer";
++ interrupts = <1 2 0xf08>,
++ <1 3 0xf08>,
++ <1 4 0xf08>,
++ <1 1 0xf08>;
++ clock-frequency = <48000000>;
++ };
++
++ pinctrl@0x01000000 {
++ serial_0_pins: serial_pinmux {
++ mux {
++ pins = "gpio16", "gpio17";
++ function = "blsp_uart0";
++ bias-disable;
++ };
++ };
++
++ serial_1_pins: serial1_pinmux {
++ mux {
++ pins = "gpio8", "gpio9";
++ function = "blsp_uart1";
++ bias-disable;
++ };
++ };
++
++ spi_0_pins: spi_0_pinmux {
++ pinmux {
++ function = "blsp_spi0";
++ pins = "gpio13", "gpio14", "gpio15";
++ };
++ pinmux_cs {
++ function = "gpio";
++ pins = "gpio12";
++ };
++ pinconf {
++ pins = "gpio13", "gpio14", "gpio15";
++ drive-strength = <12>;
++ bias-disable;
++ };
++ pinconf_cs {
++ pins = "gpio12";
++ drive-strength = <2>;
++ bias-disable;
++ output-high;
++ };
++ };
++
++ i2c_0_pins: i2c_0_pinmux {
++ pinmux {
++ function = "blsp_i2c0";
++ pins = "gpio10", "gpio11";
++ };
++ pinconf {
++ pins = "gpio10", "gpio11";
++ drive-strength = <16>;
++ bias-disable;
++ };
++ };
++ };
++
++ blsp_dma: dma@7884000 {
++ status = "ok";
++ };
++
++ spi_0: spi@78b5000 {
++ pinctrl-0 = <&spi_0_pins>;
++ pinctrl-names = "default";
++ status = "ok";
++ cs-gpios = <&tlmm 12 0>;
++
++ mx25l25635e@0 {
++ #address-cells = <1>;
++ #size-cells = <1>;
++ reg = <0>;
++ compatible = "mx25l25635e";
++ spi-max-frequency = <24000000>;
++ };
++ };
++
++ i2c_0: i2c@78b7000 { /* BLSP1 QUP2 */
++ pinctrl-0 = <&i2c_0_pins>;
++ pinctrl-names = "default";
++
++ status = "ok";
++ };
++
++ serial@78af000 {
++ pinctrl-0 = <&serial_0_pins>;
++ pinctrl-names = "default";
++ status = "ok";
++ };
++
++ serial@78b0000 {
++ pinctrl-0 = <&serial_1_pins>;
++ pinctrl-names = "default";
++ status = "ok";
++ };
++
++ usb3_ss_phy: ssphy@9a000 {
++ status = "ok";
++ };
++
++ usb3_hs_phy: hsphy@a6000 {
++ status = "ok";
++ };
++
++ usb3: usb3@0 {
++ status = "ok";
++ };
++
++ usb2_hs_phy: hsphy@a8000 {
++ status = "ok";
++ };
++
++ usb2: usb2@6000000 {
++ status = "ok";
++ };
++
++ cryptobam: dma@8e04000 {
++ status = "ok";
++ };
++
++ crypto@8e3a000 {
++ status = "ok";
++ };
++
++ watchdog@b017000 {
++ status = "ok";
++ };
++ };
++};
projects / openwrt / staging / yousong.git / blobdiff