ipq806x: 6.1: copy patches, files and config from 5.15

[openwrt/staging/ansuel.git] / target / linux / ipq806x / patches-6.1 / 106-v6.1-01-ARM-dts-qcom-ipq8064-add-v2-dtsi-variant.patch

diff --git a/target/linux/ipq806x/patches-6.1/106-v6.1-01-ARM-dts-qcom-ipq8064-add-v2-dtsi-variant.patch b/target/linux/ipq806x/patches-6.1/106-v6.1-01-ARM-dts-qcom-ipq8064-add-v2-dtsi-variant.patch
new file mode 100644 (file)
index 0000000..8b20a55
--- /dev/null
+++ b/target/linux/ipq806x/patches-6.1/106-v6.1-01-ARM-dts-qcom-ipq8064-add-v2-dtsi-variant.patch
@@ -0,0 +1,129 @@
+From 9f7097a8b1948533a6db1b53b5c0480cc75bbd16 Mon Sep 17 00:00:00 2001
+From: Christian Marangi <ansuelsmth@gmail.com>
+Date: Mon, 18 Jul 2022 18:05:16 +0200
+Subject: [PATCH 1/3] ARM: dts: qcom: ipq8064: add v2 dtsi variant
+
+Add ipq8064-v2.0 dtsi variant that differ from original ipq8064 SoC for
+some additional pcie, sata and usb configuration values, additional
+reserved memory and serial output.
+
+Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
+---
+ .../boot/dts/qcom-ipq8064-v2.0-smb208.dtsi    | 37 ++++++++++
+ arch/arm/boot/dts/qcom-ipq8064-v2.0.dtsi      | 69 +++++++++++++++++++
+ 2 files changed, 106 insertions(+)
+ create mode 100644 arch/arm/boot/dts/qcom-ipq8064-v2.0-smb208.dtsi
+ create mode 100644 arch/arm/boot/dts/qcom-ipq8064-v2.0.dtsi
+
+--- /dev/null
++++ b/arch/arm/boot/dts/qcom-ipq8064-v2.0-smb208.dtsi
+@@ -0,0 +1,37 @@
++// SPDX-License-Identifier: GPL-2.0
++
++#include "qcom-ipq8064-v2.0.dtsi"
++
++&rpm {
++      smb208_regulators: regulators {
++              compatible = "qcom,rpm-smb208-regulators";
++
++              smb208_s1a: s1a {
++                      regulator-min-microvolt = <1050000>;
++                      regulator-max-microvolt = <1150000>;
++
++                      qcom,switch-mode-frequency = <1200000>;
++              };
++
++              smb208_s1b: s1b {
++                      regulator-min-microvolt = <1050000>;
++                      regulator-max-microvolt = <1150000>;
++
++                      qcom,switch-mode-frequency = <1200000>;
++              };
++
++              smb208_s2a: s2a {
++                      regulator-min-microvolt = < 800000>;
++                      regulator-max-microvolt = <1250000>;
++
++                      qcom,switch-mode-frequency = <1200000>;
++              };
++
++              smb208_s2b: s2b {
++                      regulator-min-microvolt = < 800000>;
++                      regulator-max-microvolt = <1250000>;
++
++                      qcom,switch-mode-frequency = <1200000>;
++              };
++      };
++};
+--- /dev/null
++++ b/arch/arm/boot/dts/qcom-ipq8064-v2.0.dtsi
+@@ -0,0 +1,69 @@
++// SPDX-License-Identifier: GPL-2.0
++
++#include "qcom-ipq8064.dtsi"
++
++/ {
++      model = "Qualcomm Technologies, Inc. IPQ8064-v2.0";
++
++      aliases {
++              serial0 = &gsbi4_serial;
++      };
++
++      chosen {
++              stdout-path = "serial0:115200n8";
++      };
++
++      reserved-memory {
++              #address-cells = <1>;
++              #size-cells = <1>;
++              ranges;
++
++              rsvd@41200000 {
++                      reg = <0x41200000 0x300000>;
++                      no-map;
++              };
++      };
++};
++
++&gsbi4 {
++      qcom,mode = <GSBI_PROT_I2C_UART>;
++      status = "okay";
++
++      serial@16340000 {
++              status = "okay";
++      };
++      /*
++       * The i2c device on gsbi4 should not be enabled.
++       * On ipq806x designs gsbi4 i2c is meant for exclusive
++       * RPM usage. Turning this on in kernel manifests as
++       * i2c failure for the RPM.
++       */
++};
++
++&pcie0 {
++      compatible = "qcom,pcie-ipq8064-v2";
++};
++
++&pcie1 {
++      compatible = "qcom,pcie-ipq8064-v2";
++};
++
++&pcie2 {
++      compatible = "qcom,pcie-ipq8064-v2";
++};
++
++&sata {
++      ports-implemented = <0x1>;
++};
++
++&ss_phy_0 {
++      qcom,rx-eq = <2>;
++      qcom,tx-deamp_3_5db = <32>;
++      qcom,mpll = <5>;
++};
++
++&ss_phy_1 {
++      qcom,rx-eq = <2>;
++      qcom,tx-deamp_3_5db = <32>;
++      qcom,mpll = <5>;
++};