+++ /dev/null
-From 504188183408fac0f61b59f5ed8ea1773fe43669 Mon Sep 17 00:00:00 2001
-From: Christian 'Ansuel' Marangi <ansuelsmth@gmail.com>
-Date: Wed, 15 Jun 2022 16:59:30 +0200
-Subject: [PATCH 2/2] ARM: dts: qcom: add MDIO dedicated controller node for
- ipq806x
-
-Add MDIO dedicated controller attached to gmac0 and fix rb3011 dts to
-correctly use the new tag.
-
-Signed-off-by: Christian 'Ansuel' Marangi <ansuelsmth@gmail.com>
----
- arch/arm/boot/dts/qcom-ipq8064-rb3011.dts | 134 +++++++++++-----------
- arch/arm/boot/dts/qcom-ipq8064.dtsi | 14 +++
- 2 files changed, 81 insertions(+), 67 deletions(-)
-
---- a/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts
-+++ b/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts
-@@ -25,73 +25,6 @@
- device_type = "memory";
- };
-
-- mdio0: mdio-0 {
-- status = "okay";
-- compatible = "virtual,mdio-gpio";
-- gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH>,
-- <&qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
-- #address-cells = <1>;
-- #size-cells = <0>;
--
-- pinctrl-0 = <&mdio0_pins>;
-- pinctrl-names = "default";
--
-- switch0: switch@10 {
-- compatible = "qca,qca8337";
-- #address-cells = <1>;
-- #size-cells = <0>;
--
-- dsa,member = <0 0>;
--
-- pinctrl-0 = <&sw0_reset_pin>;
-- pinctrl-names = "default";
--
-- reset-gpios = <&qcom_pinmux 16 GPIO_ACTIVE_LOW>;
-- reg = <0x10>;
--
-- ports {
-- #address-cells = <1>;
-- #size-cells = <0>;
--
-- switch0cpu: port@0 {
-- reg = <0>;
-- label = "cpu";
-- ethernet = <&gmac0>;
-- phy-mode = "rgmii-id";
-- fixed-link {
-- speed = <1000>;
-- full-duplex;
-- };
-- };
--
-- port@1 {
-- reg = <1>;
-- label = "sw1";
-- };
--
-- port@2 {
-- reg = <2>;
-- label = "sw2";
-- };
--
-- port@3 {
-- reg = <3>;
-- label = "sw3";
-- };
--
-- port@4 {
-- reg = <4>;
-- label = "sw4";
-- };
--
-- port@5 {
-- reg = <5>;
-- label = "sw5";
-- };
-- };
-- };
-- };
--
- mdio1: mdio-1 {
- status = "okay";
- compatible = "virtual,mdio-gpio";
-@@ -222,6 +155,73 @@
- status = "okay";
- };
-
-+&mdio0 {
-+ status = "okay";
-+ compatible = "virtual,mdio-gpio";
-+ gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH>,
-+ <&qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ pinctrl-0 = <&mdio0_pins>;
-+ pinctrl-names = "default";
-+
-+ switch0: switch@10 {
-+ compatible = "qca,qca8337";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ dsa,member = <0 0>;
-+
-+ pinctrl-0 = <&sw0_reset_pin>;
-+ pinctrl-names = "default";
-+
-+ reset-gpios = <&qcom_pinmux 16 GPIO_ACTIVE_LOW>;
-+ reg = <0x10>;
-+
-+ ports {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ switch0cpu: port@0 {
-+ reg = <0>;
-+ label = "cpu";
-+ ethernet = <&gmac0>;
-+ phy-mode = "rgmii-id";
-+ fixed-link {
-+ speed = <1000>;
-+ full-duplex;
-+ };
-+ };
-+
-+ port@1 {
-+ reg = <1>;
-+ label = "sw1";
-+ };
-+
-+ port@2 {
-+ reg = <2>;
-+ label = "sw2";
-+ };
-+
-+ port@3 {
-+ reg = <3>;
-+ label = "sw3";
-+ };
-+
-+ port@4 {
-+ reg = <4>;
-+ label = "sw4";
-+ };
-+
-+ port@5 {
-+ reg = <5>;
-+ label = "sw5";
-+ };
-+ };
-+ };
-+};
-+
- &gmac0 {
- status = "okay";
-
---- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
-+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
-@@ -476,6 +476,20 @@
- snps,blen = <16 0 0 0 0 0 0>;
- };
-
-+ mdio0: mdio@37000000 {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ compatible = "qcom,ipq8064-mdio", "syscon";
-+ reg = <0x37000000 0x200000>;
-+ resets = <&gcc GMAC_CORE1_RESET>;
-+ reset-names = "stmmaceth";
-+ clocks = <&gcc GMAC_CORE1_CLK>;
-+ clock-names = "stmmaceth";
-+
-+ status = "disabled";
-+ };
-+
- vsdcc_fixed: vsdcc-regulator {
- compatible = "regulator-fixed";
- regulator-name = "SDCC Power";