+++ /dev/null
-/dts-v1/;
-
-#include "ipq8074.dtsi"
-#include "ipq8074-hk-cpu.dtsi"
-#include "ipq8074-ess.dtsi"
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
- model = "Netgear WAX218";
- compatible = "netgear,wax218", "qcom,ipq8074";
-
- aliases {
- serial0 = &blsp1_uart5;
- led-boot = &led_power_amber;
- led-failsafe = &led_power_amber;
- led-running = &led_power_amber;
- led-upgrade = &led_power_amber;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- /*
- * Netgear's U-Boot adds "ubi.mtd=rootfs root=mtd:ubi_rootfs"
- * That fails to create a UBI block device, so add it here.
- */
- bootargs-append = " ubi.block=0,rootfs root=/dev/ubiblock0_1";
- };
-
- keys {
- compatible = "gpio-keys";
-
- reset {
- label = "reset";
- gpios = <&tlmm 52 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-
- led_spi {
- compatible = "spi-gpio";
- #address-cells = <1>;
- #size-cells = <0>;
-
- sck-gpios = <&tlmm 18 GPIO_ACTIVE_HIGH>;
- mosi-gpios = <&tlmm 19 GPIO_ACTIVE_HIGH>;
-
- led_gpio: led_gpio@0 {
- compatible = "fairchild,74hc595";
- reg = <0>;
- gpio-controller;
- #gpio-cells = <2>;
- registers-number = <1>;
- enable-gpios = <&tlmm 20 GPIO_ACTIVE_HIGH>;
- spi-max-frequency = <1000000>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_power_amber: led_power {
- label = "amber:power";
- gpios = <&led_gpio 1 GPIO_ACTIVE_HIGH>;
- };
-
- led_lan {
- label = "blue:lan";
- gpios = <&led_gpio 2 GPIO_ACTIVE_HIGH>;
- };
-
- led_wlan_2g {
- label = "blue:wlan2g";
- gpios = <&led_gpio 3 GPIO_ACTIVE_HIGH>;
- };
-
- led_wlan_5g {
- label = "blue:wlan5g";
- gpios = <&led_gpio 4 GPIO_ACTIVE_HIGH>;
- };
- };
-};
-
-&edma {
- status = "okay";
-};
-
-&switch {
- status = "okay";
-
- switch_cpu_bmp = <0x1>;
- switch_lan_bmp = <0x3e>;
- switch_wan_bmp = <0x40>;
- switch_mac_mode = <0x00>;
- switch_mac_mode1 = <0xff>;
- switch_mac_mode2 = <0x0f>;
- bm_tick_mode = <0>;
- tm_tick_mode = <0>;
-
- qcom,port_phyinfo {
- port@5 {
- port_id = <6>;
- phy_address = <28>;
- port_mac_sel = "QGMAC_PORT";
- };
- };
-};
-
-&tlmm {
- mdio_pins: mdio-pins {
- mdc {
- pins = "gpio68";
- function = "mdc";
- drive-strength = <8>;
- bias-pull-up;
- };
-
- mdio {
- pins = "gpio69";
- function = "mdio";
- drive-strength = <8>;
- bias-pull-up;
- };
- };
-};
-
-&mdio {
- status = "okay";
-
- pinctrl-0 = <&mdio_pins>;
- pinctrl-names = "default";
- reset-gpios = <&tlmm 44 GPIO_ACTIVE_LOW>;
-
- qca8081_28: ethernet-phy@28 {
- reg = <28>;
- };
-};
-
-&dp6_syn {
- status = "okay";
- phy-handle = <&qca8081_28>;
- label = "lan";
- nvmem-cells = <&macaddr_ubootenv_ethaddr>;
- nvmem-cell-names = "mac-address";
-};
-
-&qpic_bam {
- status = "okay";
-};
-
-&qpic_nand {
- status = "okay";
-
- nand@0 {
- reg = <0>;
- nand-ecc-strength = <4>;
- nand-ecc-step-size = <512>;
- nand-bus-width = <8>;
-
- partitions {
- compatible = "qcom,smem-part";
-
- partition-0-appsblenv {
- compatible = "fixed-partitions";
- label = "0:appsblenv";
- read-only;
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- compatible = "u-boot,env";
- label = "env-data";
- reg = <0x0 0x40000>;
-
- macaddr_ubootenv_ethaddr: ethaddr {};
- };
- };
- };
- };
-};
-
-&blsp1_uart5 {
- status = "okay";
-};
-
-&wifi {
- status = "okay";
-
- qcom,ath11k-calibration-variant = "Netgear-WAX218";
-};