ipq807x: rename target to qualcommax

[openwrt/staging/jow.git] / target / linux / ipq807x / files / arch / arm64 / boot / dts / qcom / ipq8072-wax218.dts

diff --git a/target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8072-wax218.dts b/target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8072-wax218.dts
deleted file mode 100644 (file)
index 5bfcdcc..0000000
--- a/target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8072-wax218.dts
+++ /dev/null
@@ -1,191 +0,0 @@
-/dts-v1/;
-
-#include "ipq8074.dtsi"
-#include "ipq8074-hk-cpu.dtsi"
-#include "ipq8074-ess.dtsi"
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-       model = "Netgear WAX218";
-       compatible = "netgear,wax218", "qcom,ipq8074";
-
-       aliases {
-               serial0 = &blsp1_uart5;
-               led-boot = &led_power_amber;
-               led-failsafe = &led_power_amber;
-               led-running = &led_power_amber;
-               led-upgrade = &led_power_amber;
-       };
-
-       chosen {
-               stdout-path = "serial0:115200n8";
-               /*
-                * Netgear's U-Boot adds "ubi.mtd=rootfs root=mtd:ubi_rootfs"
-                * That fails to create a UBI block device, so add it here.
-               */
-               bootargs-append = " ubi.block=0,rootfs root=/dev/ubiblock0_1";
-       };
-
-       keys {
-               compatible = "gpio-keys";
-
-               reset {
-                       label = "reset";
-                       gpios = <&tlmm 52 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_RESTART>;
-               };
-       };
-
-       led_spi {
-               compatible = "spi-gpio";
-               #address-cells = <1>;
-               #size-cells = <0>;
-
-               sck-gpios = <&tlmm 18 GPIO_ACTIVE_HIGH>;
-               mosi-gpios = <&tlmm 19 GPIO_ACTIVE_HIGH>;
-
-               led_gpio: led_gpio@0 {
-                       compatible = "fairchild,74hc595";
-                       reg = <0>;
-                       gpio-controller;
-                       #gpio-cells = <2>;
-                       registers-number = <1>;
-                       enable-gpios = <&tlmm 20 GPIO_ACTIVE_HIGH>;
-                       spi-max-frequency = <1000000>;
-               };
-       };
-
-       leds {
-               compatible = "gpio-leds";
-
-               led_power_amber: led_power {
-                       label = "amber:power";
-                       gpios = <&led_gpio 1 GPIO_ACTIVE_HIGH>;
-               };
-
-               led_lan {
-                       label = "blue:lan";
-                       gpios = <&led_gpio 2 GPIO_ACTIVE_HIGH>;
-               };
-
-               led_wlan_2g {
-                       label = "blue:wlan2g";
-                       gpios = <&led_gpio 3 GPIO_ACTIVE_HIGH>;
-               };
-
-               led_wlan_5g {
-                       label = "blue:wlan5g";
-                       gpios = <&led_gpio 4 GPIO_ACTIVE_HIGH>;
-               };
-       };
-};
-
-&edma {
-       status = "okay";
-};
-
-&switch {
-       status = "okay";
-
-       switch_cpu_bmp = <0x1>;
-       switch_lan_bmp = <0x3e>;
-       switch_wan_bmp = <0x40>;
-       switch_mac_mode = <0x00>;
-       switch_mac_mode1 = <0xff>;
-       switch_mac_mode2 = <0x0f>;
-       bm_tick_mode = <0>;
-       tm_tick_mode = <0>;
-
-       qcom,port_phyinfo {
-               port@5 {
-                       port_id = <6>;
-                       phy_address = <28>;
-                       port_mac_sel = "QGMAC_PORT";
-               };
-       };
-};
-
-&tlmm {
-       mdio_pins: mdio-pins {
-               mdc {
-                       pins = "gpio68";
-                       function = "mdc";
-                       drive-strength = <8>;
-                       bias-pull-up;
-               };
-
-               mdio {
-                       pins = "gpio69";
-                       function = "mdio";
-                       drive-strength = <8>;
-                       bias-pull-up;
-               };
-       };
-};
-
-&mdio {
-       status = "okay";
-
-       pinctrl-0 = <&mdio_pins>;
-       pinctrl-names = "default";
-       reset-gpios = <&tlmm 44 GPIO_ACTIVE_LOW>;
-
-       qca8081_28: ethernet-phy@28 {
-               reg = <28>;
-       };
-};
-
-&dp6_syn {
-       status = "okay";
-       phy-handle = <&qca8081_28>;
-       label = "lan";
-       nvmem-cells = <&macaddr_ubootenv_ethaddr>;
-       nvmem-cell-names = "mac-address";
-};
-
-&qpic_bam {
-       status = "okay";
-};
-
-&qpic_nand {
-       status = "okay";
-
-       nand@0 {
-               reg = <0>;
-               nand-ecc-strength = <4>;
-               nand-ecc-step-size = <512>;
-               nand-bus-width = <8>;
-
-               partitions {
-                       compatible = "qcom,smem-part";
-
-                       partition-0-appsblenv {
-                               compatible = "fixed-partitions";
-                               label = "0:appsblenv";
-                               read-only;
-                               #address-cells = <1>;
-                               #size-cells = <1>;
-
-                               partition@0 {
-                                       compatible = "u-boot,env";
-                                       label = "env-data";
-                                       reg = <0x0 0x40000>;
-
-                                       macaddr_ubootenv_ethaddr: ethaddr {};
-                               };
-                       };
-               };
-       };
-};
-
-&blsp1_uart5 {
-       status = "okay";
-};
-
-&wifi {
-       status = "okay";
-
-       qcom,ath11k-calibration-variant = "Netgear-WAX218";
-};