ipq807x: remove 5.15 support

[openwrt/openwrt.git] / target / linux / ipq807x / patches-5.15 / 0001-v5.16-arm64-dts-qcom-ipq8074-add-SPMI-bus.patch

diff --git a/target/linux/ipq807x/patches-5.15/0001-v5.16-arm64-dts-qcom-ipq8074-add-SPMI-bus.patch b/target/linux/ipq807x/patches-5.15/0001-v5.16-arm64-dts-qcom-ipq8074-add-SPMI-bus.patch
deleted file mode 100644 (file)
index f1c0923..0000000
--- a/target/linux/ipq807x/patches-5.15/0001-v5.16-arm64-dts-qcom-ipq8074-add-SPMI-bus.patch
+++ /dev/null
@@ -1,43 +0,0 @@
-From adf62d2727d4aa2b587e2db59eafb5be776a653c Mon Sep 17 00:00:00 2001
-From: Robert Marko <robimarko@gmail.com>
-Date: Sun, 5 Sep 2021 18:58:16 +0200
-Subject: [PATCH] arm64: dts: qcom: ipq8074: add SPMI bus
-
-IPQ8074 uses SPMI for communication with the PMIC, so
-since its already supported add the DT node for it.
-
-Signed-off-by: Robert Marko <robimarko@gmail.com>
-Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
-Link: https://lore.kernel.org/r/20210905165816.655275-1-robimarko@gmail.com
----
- arch/arm64/boot/dts/qcom/ipq8074.dtsi | 19 +++++++++++++++++++
- 1 file changed, 19 insertions(+)
-
---- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
-+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
-@@ -320,6 +320,25 @@
-                       #reset-cells = <0x1>;
-               };
- 
-+              spmi_bus: spmi@200f000 {
-+                      compatible = "qcom,spmi-pmic-arb";
-+                      reg = <0x0200f000 0x001000>,
-+                            <0x02400000 0x800000>,
-+                            <0x02c00000 0x800000>,
-+                            <0x03800000 0x200000>,
-+                            <0x0200a000 0x000700>;
-+                      reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
-+                      interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
-+                      interrupt-names = "periph_irq";
-+                      qcom,ee = <0>;
-+                      qcom,channel = <0>;
-+                      #address-cells = <2>;
-+                      #size-cells = <0>;
-+                      interrupt-controller;
-+                      #interrupt-cells = <4>;
-+                      cell-index = <0>;
-+              };
-+
-               sdhc_1: sdhci@7824900 {
-                       compatible = "qcom,sdhci-msm-v4";
-                       reg = <0x7824900 0x500>, <0x7824000 0x800>;