+++ /dev/null
-From 7805365fee582056b32c69cf35aafbb94b14a8ca Mon Sep 17 00:00:00 2001
-From: Robert Marko <robimarko@gmail.com>
-Date: Fri, 19 Aug 2022 00:02:43 +0200
-Subject: [PATCH] thermal/drivers/tsens: Allow configuring min and max trips
-
-IPQ8074 and IPQ6018 dont support negative trip temperatures and support
-up to 204 degrees C as the max trip temperature.
-
-So, instead of always setting the -40 as min and 120 degrees C as max
-allow it to be configured as part of the features.
-
-Signed-off-by: Robert Marko <robimarko@gmail.com>
-Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
-Link: https://lore.kernel.org/r/20220818220245.338396-3-robimarko@gmail.com
-Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
----
- drivers/thermal/qcom/tsens-8960.c | 2 ++
- drivers/thermal/qcom/tsens-v0_1.c | 2 ++
- drivers/thermal/qcom/tsens-v1.c | 2 ++
- drivers/thermal/qcom/tsens-v2.c | 2 ++
- drivers/thermal/qcom/tsens.c | 4 ++--
- drivers/thermal/qcom/tsens.h | 4 ++++
- 6 files changed, 14 insertions(+), 2 deletions(-)
-
---- a/drivers/thermal/qcom/tsens-8960.c
-+++ b/drivers/thermal/qcom/tsens-8960.c
-@@ -273,6 +273,8 @@ static struct tsens_features tsens_8960_
- .adc = 1,
- .srot_split = 0,
- .max_sensors = 11,
-+ .trip_min_temp = -40000,
-+ .trip_max_temp = 120000,
- };
-
- struct tsens_plat_data data_8960 = {
---- a/drivers/thermal/qcom/tsens-v0_1.c
-+++ b/drivers/thermal/qcom/tsens-v0_1.c
-@@ -553,6 +553,8 @@ static struct tsens_features tsens_v0_1_
- .adc = 1,
- .srot_split = 1,
- .max_sensors = 11,
-+ .trip_min_temp = -40000,
-+ .trip_max_temp = 120000,
- };
-
- static const struct reg_field tsens_v0_1_regfields[MAX_REGFIELDS] = {
---- a/drivers/thermal/qcom/tsens-v1.c
-+++ b/drivers/thermal/qcom/tsens-v1.c
-@@ -277,6 +277,8 @@ static struct tsens_features tsens_v1_fe
- .adc = 1,
- .srot_split = 1,
- .max_sensors = 11,
-+ .trip_min_temp = -40000,
-+ .trip_max_temp = 120000,
- };
-
- static const struct reg_field tsens_v1_regfields[MAX_REGFIELDS] = {
---- a/drivers/thermal/qcom/tsens-v2.c
-+++ b/drivers/thermal/qcom/tsens-v2.c
-@@ -35,6 +35,8 @@ static struct tsens_features tsens_v2_fe
- .adc = 0,
- .srot_split = 1,
- .max_sensors = 16,
-+ .trip_min_temp = -40000,
-+ .trip_max_temp = 120000,
- };
-
- static const struct reg_field tsens_v2_regfields[MAX_REGFIELDS] = {
---- a/drivers/thermal/qcom/tsens.c
-+++ b/drivers/thermal/qcom/tsens.c
-@@ -572,8 +572,8 @@ static int tsens_set_trips(void *_sensor
- dev_dbg(dev, "[%u] %s: proposed thresholds: (%d:%d)\n",
- hw_id, __func__, low, high);
-
-- cl_high = clamp_val(high, -40000, 120000);
-- cl_low = clamp_val(low, -40000, 120000);
-+ cl_high = clamp_val(high, priv->feat->trip_min_temp, priv->feat->trip_max_temp);
-+ cl_low = clamp_val(low, priv->feat->trip_min_temp, priv->feat->trip_max_temp);
-
- high_val = tsens_mC_to_hw(s, cl_high);
- low_val = tsens_mC_to_hw(s, cl_low);
---- a/drivers/thermal/qcom/tsens.h
-+++ b/drivers/thermal/qcom/tsens.h
-@@ -501,6 +501,8 @@ enum regfield_ids {
- * with SROT only being available to secure boot firmware?
- * @has_watchdog: does this IP support watchdog functionality?
- * @max_sensors: maximum sensors supported by this version of the IP
-+ * @trip_min_temp: minimum trip temperature supported by this version of the IP
-+ * @trip_max_temp: maximum trip temperature supported by this version of the IP
- */
- struct tsens_features {
- unsigned int ver_major;
-@@ -510,6 +512,8 @@ struct tsens_features {
- unsigned int srot_split:1;
- unsigned int has_watchdog:1;
- unsigned int max_sensors;
-+ int trip_min_temp;
-+ int trip_max_temp;
- };
-
- /**