ipq807x: remove 5.15 support

[openwrt/openwrt.git] / target / linux / ipq807x / patches-5.15 / 0044-v6.2-thermal-drivers-tsens-Add-IPQ8074-support.patch

diff --git a/target/linux/ipq807x/patches-5.15/0044-v6.2-thermal-drivers-tsens-Add-IPQ8074-support.patch b/target/linux/ipq807x/patches-5.15/0044-v6.2-thermal-drivers-tsens-Add-IPQ8074-support.patch
deleted file mode 100644 (file)
index 3e3e77a..0000000
--- a/target/linux/ipq807x/patches-5.15/0044-v6.2-thermal-drivers-tsens-Add-IPQ8074-support.patch
+++ /dev/null
@@ -1,74 +0,0 @@
-From 0164d794cbc58488a7321272e95958d10cf103a4 Mon Sep 17 00:00:00 2001
-From: Robert Marko <robimarko@gmail.com>
-Date: Fri, 19 Aug 2022 00:02:44 +0200
-Subject: [PATCH] thermal/drivers/tsens: Add IPQ8074 support
-
-Qualcomm IPQ8074 uses tsens v2.3 IP, however unlike other tsens v2 IP
-it only has one IRQ, that is used for up/low as well as critical.
-It also does not support negative trip temperatures.
-
-Signed-off-by: Robert Marko <robimarko@gmail.com>
-Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
-Link: https://lore.kernel.org/r/20220818220245.338396-4-robimarko@gmail.com
-Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
----
- drivers/thermal/qcom/tsens-v2.c | 17 +++++++++++++++++
- drivers/thermal/qcom/tsens.c    |  3 +++
- drivers/thermal/qcom/tsens.h    |  2 +-
- 3 files changed, 21 insertions(+), 1 deletion(-)
-
---- a/drivers/thermal/qcom/tsens-v2.c
-+++ b/drivers/thermal/qcom/tsens-v2.c
-@@ -39,6 +39,17 @@ static struct tsens_features tsens_v2_fe
-       .trip_max_temp  = 120000,
- };
- 
-+static struct tsens_features ipq8074_feat = {
-+      .ver_major      = VER_2_X,
-+      .crit_int       = 1,
-+      .combo_int      = 1,
-+      .adc            = 0,
-+      .srot_split     = 1,
-+      .max_sensors    = 16,
-+      .trip_min_temp  = 0,
-+      .trip_max_temp  = 204000,
-+};
-+
- static const struct reg_field tsens_v2_regfields[MAX_REGFIELDS] = {
-       /* ----- SROT ------ */
-       /* VERSION */
-@@ -104,6 +115,12 @@ struct tsens_plat_data data_tsens_v2 = {
-       .fields = tsens_v2_regfields,
- };
- 
-+struct tsens_plat_data data_ipq8074 = {
-+      .ops            = &ops_generic_v2,
-+      .feat           = &ipq8074_feat,
-+      .fields = tsens_v2_regfields,
-+};
-+
- /* Kept around for backward compatibility with old msm8996.dtsi */
- struct tsens_plat_data data_8996 = {
-       .num_sensors    = 13,
---- a/drivers/thermal/qcom/tsens.c
-+++ b/drivers/thermal/qcom/tsens.c
-@@ -991,6 +991,9 @@ static const struct of_device_id tsens_t
-               .compatible = "qcom,ipq8064-tsens",
-               .data = &data_8960,
-       }, {
-+              .compatible = "qcom,ipq8074-tsens",
-+              .data = &data_ipq8074,
-+      }, {
-               .compatible = "qcom,mdm9607-tsens",
-               .data = &data_9607,
-       }, {
---- a/drivers/thermal/qcom/tsens.h
-+++ b/drivers/thermal/qcom/tsens.h
-@@ -599,6 +599,6 @@ extern struct tsens_plat_data data_8916,
- extern struct tsens_plat_data data_tsens_v1, data_8976, data_8956;
- 
- /* TSENS v2 targets */
--extern struct tsens_plat_data data_8996, data_tsens_v2;
-+extern struct tsens_plat_data data_8996, data_ipq8074, data_tsens_v2;
- 
- #endif /* __QCOM_TSENS_H__ */