ipq807x: rename target to qualcommax

[openwrt/openwrt.git] / target / linux / ipq807x / patches-6.1 / 0005-v6.2-arm64-dts-qcom-ipq8074-add-thermal-nodes.patch

diff --git a/target/linux/ipq807x/patches-6.1/0005-v6.2-arm64-dts-qcom-ipq8074-add-thermal-nodes.patch b/target/linux/ipq807x/patches-6.1/0005-v6.2-arm64-dts-qcom-ipq8074-add-thermal-nodes.patch
deleted file mode 100644 (file)
index bad75e4..0000000
--- a/target/linux/ipq807x/patches-6.1/0005-v6.2-arm64-dts-qcom-ipq8074-add-thermal-nodes.patch
+++ /dev/null
@@ -1,130 +0,0 @@
-From c3cc0c2a17f552be2426200e47a9e2c62cf449ce Mon Sep 17 00:00:00 2001
-From: Robert Marko <robimarko@gmail.com>
-Date: Fri, 19 Aug 2022 00:02:45 +0200
-Subject: [PATCH] arm64: dts: qcom: ipq8074: add thermal nodes
-
-IPQ8074 has a tsens v2.3.0 peripheral which monitors
-temperatures around the various subsystems on the
-die.
-
-So lets add the tsens and thermal zone nodes, passive
-CPU cooling will come in later patches after CPU frequency
-scaling is supported.
-
-Signed-off-by: Robert Marko <robimarko@gmail.com>
-Signed-off-by: Bjorn Andersson <andersson@kernel.org>
-Link: https://lore.kernel.org/r/20220818220245.338396-5-robimarko@gmail.com
----
- arch/arm64/boot/dts/qcom/ipq8074.dtsi | 96 +++++++++++++++++++++++++++
- 1 file changed, 96 insertions(+)
-
---- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
-+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
-@@ -274,6 +274,16 @@
-                       status = "disabled";
-               };
- 
-+              tsens: thermal-sensor@4a9000 {
-+                      compatible = "qcom,ipq8074-tsens";
-+                      reg = <0x4a9000 0x1000>, /* TM */
-+                            <0x4a8000 0x1000>; /* SROT */
-+                      interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
-+                      interrupt-names = "combined";
-+                      #qcom,sensors = <16>;
-+                      #thermal-sensor-cells = <1>;
-+              };
-+
-               cryptobam: dma-controller@704000 {
-                       compatible = "qcom,bam-v1.7.0";
-                       reg = <0x00704000 0x20000>;
-@@ -874,4 +884,90 @@
-                            <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-                            <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
-       };
-+
-+      thermal-zones {
-+              nss-top-thermal {
-+                      polling-delay-passive = <250>;
-+                      polling-delay = <1000>;
-+
-+                      thermal-sensors = <&tsens 4>;
-+              };
-+
-+              nss0-thermal {
-+                      polling-delay-passive = <250>;
-+                      polling-delay = <1000>;
-+
-+                      thermal-sensors = <&tsens 5>;
-+              };
-+
-+              nss1-thermal {
-+                      polling-delay-passive = <250>;
-+                      polling-delay = <1000>;
-+
-+                      thermal-sensors = <&tsens 6>;
-+              };
-+
-+              wcss-phya0-thermal {
-+                      polling-delay-passive = <250>;
-+                      polling-delay = <1000>;
-+
-+                      thermal-sensors = <&tsens 7>;
-+              };
-+
-+              wcss-phya1-thermal {
-+                      polling-delay-passive = <250>;
-+                      polling-delay = <1000>;
-+
-+                      thermal-sensors = <&tsens 8>;
-+              };
-+
-+              cpu0_thermal: cpu0-thermal {
-+                      polling-delay-passive = <250>;
-+                      polling-delay = <1000>;
-+
-+                      thermal-sensors = <&tsens 9>;
-+              };
-+
-+              cpu1_thermal: cpu1-thermal {
-+                      polling-delay-passive = <250>;
-+                      polling-delay = <1000>;
-+
-+                      thermal-sensors = <&tsens 10>;
-+              };
-+
-+              cpu2_thermal: cpu2-thermal {
-+                      polling-delay-passive = <250>;
-+                      polling-delay = <1000>;
-+
-+                      thermal-sensors = <&tsens 11>;
-+              };
-+
-+              cpu3_thermal: cpu3-thermal {
-+                      polling-delay-passive = <250>;
-+                      polling-delay = <1000>;
-+
-+                      thermal-sensors = <&tsens 12>;
-+              };
-+
-+              cluster_thermal: cluster-thermal {
-+                      polling-delay-passive = <250>;
-+                      polling-delay = <1000>;
-+
-+                      thermal-sensors = <&tsens 13>;
-+              };
-+
-+              wcss-phyb0-thermal {
-+                      polling-delay-passive = <250>;
-+                      polling-delay = <1000>;
-+
-+                      thermal-sensors = <&tsens 14>;
-+              };
-+
-+              wcss-phyb1-thermal {
-+                      polling-delay-passive = <250>;
-+                      polling-delay = <1000>;
-+
-+                      thermal-sensors = <&tsens 15>;
-+              };
-+      };
- };